CNX Software - Embedded Systems News

December 4, 2012December 4, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Leap Motion Demos: AirHarp and Hands-Free Quadrator

The Leap Motion, a 3D gesture recognition USB device, has been announced in May, but developer kits have only recently been sent out to… developers, and lots of demo has started to pop up, many of which are posted on Leap Motion Facebook page. My favorite demo is the Airharp which, as the name implies, is an harp controlled by finger gestures you do in the “air”, as it demonstrates both the accuracy and responsiveness of the Leap Motion. The project is written by Adam Somers, Senior Software Engineer at Universal Studio and Stanford Alumni, who released both the binary and source code for this demo: AirHarp 0.1 – Binary built against Leap SDK v. 0.6.6 that lets you add & remove strings, cycle through scales and toggle between fullscreen and windowed mode. The source code for the Airharp which uses muskit, a C++ toolkit for music applications, both of which […]

December 4, 2012December 5, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ZOPO ZP900S Leader Smartphone Unboxing and Review

I’ve just received ZOPO ZP900S smartphone from Pandawill by Fedex. This phablet features a 5.3″ display, MediaTek MTK6577 dual core cortex A9 processor with 512 MB RAM, 4GB flash and runs Android 4.0 (upgradable to Android 4.1 once the firmware is released). This is the lite version of ZOPO ZP900 which comes with 1GB RAM. Both devices look like low cost versions of the Samsung Galaxy Note as you can see from the comparison table below between ZOPO ZP900S, ZOPO ZP900 and Samsung Galaxy Note N7000. ZOPO ZP900S & ZP900 Specifications ZOPO ZP900S Leader ZOPO ZP900 Leader Samsung Galaxy Note CPU Mediatek MTK6577 @ 1GHz Samsung Exynos 4210 @ 1.4 GHz GPU POWERVR SGX531T ARM Mali-400MP RAM 512 MB 1GB 1GB Storage 4 GB Flash + microSD 16GB/32GB Flash + microSD Display 5.3″ IPS 960×540 (qHD) 5.3″ super AMOLED 1280×800 Camera 8MP Rear, 2MP Front 8MP Rear, 2MP Front Wi-Fi […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC

December 3, 2012December 3, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Collabora and Fluendo Release GStreamer SDK for Android

Collabora and Fluendo have recently announced the availability of GStreamer’s Software Development Kit for Android, which allows developers to create multimedia playback applications for Android smartphones and tablets using Gstreamer and the Android NDK.. The GStreamer SDK for Android targets Android 2.3.1 Gingerbread or higher (API Level 9 or greater). However, due to some of the restrictions of previous versions of Android, some features such as hardware acceleration are only available on Android 4.1 Jelly Bean (API Level 16 up). Normally, you’d need the GStreamer SDK which can be installed on Linux (Ubuntu, Fedora and Debian), Windows (XP/Vista/7/8) and Mac OS X (10.6 to 10.8). But for developing Android applications using Gstreamer, you don’t. What you do need first is a typical Android development environment with the latest Android SDK, the latest Android NDK, and optionally, but recommended, the Eclipse IDE with Android ADT and NDK plugins. Once everything is […]

December 3, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

2D/3D Graphics Linux Demo (X11, EGL, GLES2, Qt4) on AllWinner A10 Tablet

Xlab (Maxim Kouprianov) has tested 2D & 3D capabilities of AllWinner A10 SoC (with Mali-400 GPU) on a Ployer MOMO11 Bird Edition tablet running OpenEmbedded with kernel 3.0.52+ testing X11, EGL, OpenGL ES2 and Qt4 on the platform, and the results are pretty smooth as you can see in the video below, although there appears to be some flickering in LunaSysMgr demo. The tools used in the demos are xfwm4 (Xfce Windows Manager), es2gears_x11, cube (Qt), LunaSysMgr (Qt/WebOS) and glmark2-es2. Qt4 acceleration is done via XlibGL platform which in turns uses X11-EGL. He used the Mali drivers version r3p0 (mali400-gles20-gles11-linux-x11-ump) and xf86-video-mali on sunxi-linux github repository mainly maintained by rz2k. You can get more details on how to build Mali-400 support for AllWinner A10 on http://linux-sunxi.org/Mali400, and GPU benchmark results for A10 show the drivers seem to work as expected.

November 30, 2012December 1, 2012 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

$69 ODROID-U & $89 ODROID-U2 Exynos 4412 Development Boards

Hardkernel has just announced 2 tiny quad core development boards based on Exynos 4412 @ 1.4 GHz (as used in Samsung Galaxy S3) and Exynos 4412 Prime @ 1.7 GHz (as used in Samsung Galaxy Note 2) called respectively ODROID-U and ODROID-U2. The other difference is the U version comes with 1 GB RAM, and the U2 version with 2 GB RAM. Here are the specification the ODROID-U and ODROID-U2 boards: Processor – Samsung Exynos4412 @ 1.4 GHz (ODROID-U) or Exynos 4412 Prime @ 1.7 Ghz (ODROID-U2), which can be overclocked respectively to 1.8 GHz and 2 GHz. GPU – Mali-400 clocked at 400MHz (ODROID-U) or 440MHz (ODROID-U2), which can be overclocked respectively to 533 and 633 MHz. System Memory – 1GB LPDDR2 DRAM @ 800MHz (ODROID-U) or 2GB @ 880MHz (ODROID-U2) Storage – microSD socket, eMMC connector USB – 2x USB 2.0 Host ports, 1x USB 2.0 device for ADB/mass […]

November 30, 2012February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Kontron Unveils ULP-COM-sA3874i Module Powered by TI Sitara AM3874

Kontron introduced ULP-COM-sA3874i, another family of computer-on-module based on ULP-COM standards, based on Texas Instruments Sitara AM3874 Cortex A8 processors that aims to drive down system costs for ultra-low power SFF (small form factor) solutions in military, industrial automation/HMI, digital signage and medical markets. Here are the technical specifications of this module family: CPU – Texas Instruments Sitara AM3874 Cortex A8 @ 800 MHz Main Memory – On-board 1 or 2 GB DDR3 depending on model. Flash – Onboard Up to 32GB NAND FLASH build option Graphics – Single Channel 18bit,24bit (18bit compatible) LVDS, and HDMI with dual independent displays support. Ethernet – 10/100/1000 MBit Ethernet USB – 2x USB 2.0, USB OTG SATA – 1x SATA Interface Interfaces – GPIO, I²C, 4x I²S, 2x CAN, 2x SPI, 4x UART Camera input – 10bit parallel interface PCI Express / PCI support – 1x PCI Express x1 Lanes Power Supply – […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs

November 30, 2012November 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kimdecent T21 mini PC Unboxing and Review

Androidpc.es has written a review for the low cost ($49) Kimdecent T21 dual core mini PC in Spanish, and I’ll provide a summary of the review in English below. Kimdecent T21 Unboxing Kimdecent T21 is an Android 4.1 HDMI TV Stick powered by Nufront NS115 dual core Cortex A9 processor. Check out my earlier post about Kimdecent T21 for specifications. The package comes with T21 mini PC, a power adapter with USB to micro USB cable, and a user manual in English. You can also watch T21 Unboxing Video on YouTube. Kimdecent T21 User Interface & System Overview The user interface is a standard Android screen, albeit with power and volume buttons in the Status Bar. I don’t really find this interface very suitable for the TV, but you can always install your own launcher such as Android TV Launcher (apk), or other launcher apps available on Google Play. Beside […]

November 30, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 12.11 Release with Linux Kernel 3.7 and Android 4.2

Linaro release 12.11 has just been announced, and includes Linux Kernel 3.7-rc2 and Android 4.2. The tracking version (stable release) uses Kernel 3.4.19. This release upgrade Android to version 4.2, adds support for Origen 4 Quad board, and you can now use perf profiling utility in Linaro Android. Initial GRUB support for ARM is now available, the Ubuntu Precise server image is back online and lots of updates have been done on the kernel, mainly for Android, device tree and big.LITTLE. Here are the highlights of the release: Android Platform Enablement Android upgraded from 4.1.2 to 4.2 to all the platforms Android builds are available for Origen 4412 board setup Improvements to click-through license infrastructure MP3 playback enabled for ARM Versatile Express and Samsung Origen (4210 and 4412) Fixed riff USB issue on newer laptops Testing/LAVA Re-enabled Android CTS testing Integrated the new Methanol browser test Upstreaming Perf patch was […]