CNX Software - Embedded Systems News

October 28, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linaro 12.10 Release with Linux kernel 3.6 and Android 4.1.2

Linaro release 12.10 has recently been announced, and includes Linux Kernel 3.6.1 and Android 4.1.2. This release provides further improvement to big.LITTLE architecture and Linux can boot on TC2 (A Test Chip with 2 Cortex A15 and 3 Cortex a7 cores) and an ARMv8 (Aarch64) OpenEmbedded community build is now available for download. Work has also be done on preparing demos for Linaro Connect (29 Oct – 02 Nov) in Copenhagen including a single ARM kernel booting on different boards. Here are the highlights of the release: Android Linaro Android 12.10 has been upgraded to 4.1.1_r6 and then to 4.1.2. Linaro Android builds are now shipped with improved instructions. AOSP Galaxy Nexus builds are available from http://android-build.linaro.org and include DS-5 support. Linaro Android toolchain has been updated to Linaro GCC 2012.10. Dalvik benchmarked against Hard-Float Open JDK and Java SE. Power meter improvements for LAVA automation. Prepared Connect demonstrations benchmarking […]

October 26, 2012October 28, 2012 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

$132 Kingdel NC270 Thin Client Powered by Intel Atom N270

Reader onebir tipped me about a low cost Intel Atom based PC on Aliexpress with some decent specs. Kingdel NC270 PC is based on Intel Atom N270 processor @ 1.6 Ghz with 2 GB RAM and 8 GB SSD. It is capable of decoding 720p HD video and features lots of ports which could make it a good entry-level digital signage player among other things. Here are the specs of this nettop. Processor – Intel Atom n270 System Memory – 2 GB (in most places, but it’s also written 1GB in one place in the description) Storage – 8GB SSD (16GB and 320GB version is also available) Connectivity: 10/100 Ethernet WiFi (optional?) Serial Ports – female DB-25, compatible SPP, ECP and EPP | male DB-9, compatible FIFO prefix = st1 16C550 2 PS/2 port (mouse, keyboard) USB – 6 USB host 2.0 ports 1x PCI slot Video Output – VGA […]

October 23, 2012July 31, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Arduino Due Cortex M3 Board is now Available

Announced a little over a year ago, the Arduino (over) Due based on Atmel SAM3U Cortex M3 MCU is finally available for purchase. The specifications of the new boards are as follows: Microcontroller – Atmel AT91SAM3X8E @ 84 Mhz Flash Memory – 512 KB SRAM – 96 KB (64 + 32 KB) Operating Voltage – 3.3V Input Voltage (recommended) – 7-12V Input Voltage (min/max) – 6-20V Digital I/O Pins – 54 including 6 supporting PWM Analog Input Pins – 12 Analog Output Pins – 2 (DAC) Total DC Output Current on all I/O lines – 130 mA DC Current for 3.3V Pin – 800 mA DC Current for 5V Pin – Theoretical 1A, recommended 800 mA Debug ports – JTAG/SWD connector The new board is mostly compatible with the AVR (8-bit) boards, but since the board runs at 3.3V some shields may not be compatible (Arduino Wi-Fi and Ethernet shields do […]

October 19, 2012 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Google Unveils $249 Samsung Exynos 5 (Cortex A15) Chromebook

Back in April, we already knew Google was working on a Chromebook codenamed ‘Daisy’ based on the latest Samsung Exynos 5 Dual Cortex A15 processor, and finally, Google officially announced their first ARM based Chromebook yesterday. The specifications of the new Chromebook are as follows: SoC – Samsung Exynos 5 Dual Core Cortex A15 Processor @ 1.7 GHz with Mali T-604 GPU System Memory – 2 GB DDR3L SDRAM Storage: 16 GB SSD SD Card slot 100 GB Google Drive Cloud Storage (Free for 2 years) Display – 11.6″ LED panel (1366×768) Video Out – HDMI Connectivity Dual band Wi-Fi 802.11 a/b/g/n Bluetooth 3.0 compatible (But Bluetooth does not seem to be present in the device) USB – 1x USB 3.0 and 1x USB 2.0 host ports Camera – Front VGA camera Battery – 6.5 hours typical use (No capacity info) Weight – 1.1 kg There’s no Ethernet contrary to […]

October 17, 2012October 20, 2012 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

$89 Hiapad Hi802 Android mini PC Based on Freescale i.MX6 Quad Processor

The first (single core) mini PCs showed up in May, the dual core mini PCs in August, and the first quad core mini PCs should be available in November starting with Hiapad Hi-802 HDMI TV Stick powered by Freescale i.MX6 Quad Cortex A9 processor with 1GB RAM. The specs of the device are not available publicly, but based on diverse sources (including charbax video below), it should be as follows: SoC – Freescale i.MX6Q Quad Core Cortex A9 Processor with Vivante GC2000 GPU System Memory – 1GB RAM Storage – 16? GB NAND Flash Memory + microSD card slot Video Output – HDMI Connectivity – Built-in Wifi 802.11 b/g/n and Bluetooth USB – USB Host + USB OTG A picture of the PCB (one side only) has been uploaded by Hiapad. There are 6 through holes at the top left of the PCB which might be some debug ports (TBC […]

October 10, 2012 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Droid Stick A2 – AMLogic AML8726-MX Dual Core Android 4.1.1 mini PC

Since it was first announced in August, Rockchip RK3066 dual core mini PCs have been popping up everywhere, and AFAIK those are currently the only low cost (sub $100) dual core Android TV Sticks available. But according to a recent Kimdecent announcement, this is about to change with the release of the Droid Stick A2 based on AMLogic AML8726-MX Dual Core Cortex A9 processor with 1GB RAM and 4 to 8 GB Flash running Android Jelly Bean. Here are Droid Stick A2 specifications: CPU – Amlogic AML8726-MX Dual Core Cortex A9 @ 1.5 GHz GPU – Mali400 Dual Core, 2D/ 3D/ OpenGL ES2.0/ OpenVG1.1. System Memory – 1 GB RAM Storage – 4/8 GB Nand Flash + microSD card slot (up to 32GB) WiFi – 802.11b/g/n Video Output – HDMI (1080P) Video Decoding – Supports up to 1920x1080p@60fps Video Encoding – Supports encoding in H.264. 1080p@60fps, 720@100fps USB – 1xUSB […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

October 7, 2012October 7, 2012 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

$69 – $89 Wandboard Freescale i.MX6 Solo and Dual Development Boards

The Wandboard is a low cost Linux ARM Cortex-A9 ARM board comprised of a CPU module and an interface board. There are actually 2 versions of the board (single and dual core) which are developed by a team of engineers during their spare time: Wandboard Solo – $69 – Freescale i.MX6 Solo + 512 MB RAM Wandboard Dual – $89 – Freescale i.MX6 Dual + 1 GB RAM Both boards come with Audio I/O, Optical S/PDIF, HDMI, a camera interface, 2 micro SD cardslot, a serial port, an expansion header, USB and USB OTG ports, a SATA connector and Gb Ethernet. The dual version also adds Wifi 802.11 b/g/n and Bluetooth support. There are not so many boards with native SATA support, so for those of you who need SATA this could be really be a good option. [Update: Although there’s a SATA connector on the baseboard, this is not […]

October 5, 2012October 5, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

FPU and Memory Android Benchmarks: RgbenchMM & RgBandwidth

There are already a fair amount of Android benchmarks such as Antutu or Quadrant, but how those benchmarks work exactly is unclear and the number they return have no direct meaning, until you start comparing results to other device results. This is why Rahul Garg, a PhD student at McGill University, has written 2 new benchmarks to test FPU and memory bandwidth with known benchmark procedures and results in MFlops and MB/s which are both available on Google Play Store: RgbenchMM– A benchmark to test the floating point performance performing double-precision matrix multiplication and fully multi-threaded to support multiple cores. It’s programmed in C++ using Android NDK, and works with ARM and x86 devices running Android 2.3.3 and greater. RgBandwidth– Asimple memory bandwidth test which tests memory copy performance (in “Simple” mode), and uses tests derived from the STREAM benchmark (“Misc” tests). This can be used to get an estimate […]

Boardcon Rockchip and Allwinner SoM and SBC products