CNX Software - Embedded Systems News

June 3, 2013June 3, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Emcraft Systems STM32F4 SoM and Starter Kit Run uCLinux From On-Chip Flash

Emcraft has recently announced a new system-on-module based on STMicro STM32F437 Cortex M4 micro-controller, as well as a starter kit based on the module that can run uCLinux directly from STM32F437’s 2MB on-chip flash, allowing a faster boot time, and AFAIK, this is the only Linux-ready STM32 platform available on the market. Here are the specifications of Emcraft Systems SOM-STM32F4: MCU – STMicro STM32F437 Cortex M4 @ 168 MHz with 256KB RAM and 2MB flash External Memory – 16MB PSRAM External Storage – 16MB NOR Flash Ethernet PHY (Optional) Connectors – 2x SoM Connectors with access to I/Os: USB, Ethernet, I2C, SPI, UART, LCD I/F, ADC, DAC, GPIO… Dimensions – 30 mm x 46 mm To speed-up development and for evaluation, the company also provides a starter kit composed of the STM32F4 SoM, and a baseboard (SOM-BSB-EXT) with the following main features: USB interface using USB-UART bridge connected to UART […]

June 3, 2013June 14, 2013 by Jean-Luc Aufranc (CNXSoft) - 72 Comments

G-Box Midnight MX2 Giveaway

I reviewed Matricom G-Box Midnight MX2 Android set-top box about a month ago, and I was pretty happy with the device with regards to performance, stability, and XBMC support. During my initial review, Wi-Fi was really excellent, the best, by far, I had seen in the dozen of devices I had tested, although an upgrade to my router firmware somehow changed that. This is also one the rare device that will support OTA firmware update. There were still some problems in the firmware I tested: some videos could not play, composite output did not work…, but overall I find it’s a pretty good device. The company also seems committed to fix issues, as they even have a public bug tracking system for the MX2. If you plan to use Android app, and not only XBMC, the IR remote provided may not be the ideal input device, and you’ll probably need […]

June 2, 2013June 2, 2013 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

$96 Kingnovel K-R42-1 (MK888) Android Set-top Box Powered by RK3188 Processor

I’ve now got several RK3188 mini PCs, but I hadn’t found full sized set-top boxes based on Rockchip RK3188 quad core processor with Ethernet, and multiple USB ports. Thanks to a post in mini PC G+ community, we have now a nice looking quad core STB called K-R42-1 by Kingnovel, which might be the manufacturer design house behind the device, and sold for $96 including shipping in one Aliexpress store under the model name MK888. K-R42-1 / MK888 Specifications: SoC – Rockchip RK3188 quad Cortex-A9 CPU @ 1.6 GHz + Mali-400 MP4 GPU @ 500 MHz System Memory – 2GB DDR3 SDRAM Storage – 8GB Nand Flash + MicroSD slot (Up to 32GB) Connectivity 10/100M Ethernet WiFi 802.11 b/g/n with external antenna Bluetooth EDR 2.0 Video Output – HDMI 1.3 + AV output jack Audio Output – HDMI + S/PDIF Video Codecs (Decode) – MPEG-1, MPEG-2, MPEG-4, H.263, H.264 (up […]

June 2, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Critical Link MityARM-5CSX CoM Powered by Altera Cyclone V SoC

Earlier this week, I wrote about EnSilica eSi-ZM1, a system-on-module based on Xilinx Zynq7000 Extensible Processing Platform that comes with a dual core ARM Cortex A9 and FPGA fabric. It turns out Xilinx is not the only game in town, and Altera’s Cyclone V SoC, announced last December, also includes a dual core ARM Cortex A9 processor with Altera FPGA logic, and Critical Linux recently announced MityARM-5CSX computer-on-module based on this platform. Target applications include machine vision, scientific imaging, motor control, medical imaging and instrumentation, test and measurement, industrial instrumentation, as well as a military & aerospace. MityARM-5CSX specifications: SoC – Altera Cyclone V SX-U672 with FPGA logic and dual-core ARM Cortex-A9 up to 800MHz System Memory – 1GB DDR3 RAM, and 256MB DDR3 FPGA RAM (optional) Storage – 32MB QPSI NOR flash FPGA I/O fabric: PCIe hard core Up to 145 user-programmable I/O lines (including several 875MHz SerDes lanes) […]

June 1, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gumstix Alto35 Customizable Touchscreen Board

A few months ago, Gumstix introduced Geppeto, a web platform that allows you to design and order your own baseboard for Gumstix Overo systems-on-module within minutes. The company has just announced Alto35, an expansion board built entirely with Geppetto. The Alto35 replaces Palo35 Overo-series expansion board with the same features, but adding the possibility of customizing the board via Geppetto. Alto34 expansions board features the following: 3.5″ LCD resistive touch screen Stereo audio in/out jacks 3D accelerometer (STMicro LIS33DE) RC servo USB – 2x USB mini-B ports, including console port (FT232RQ USB UART) LEDs in 4 different colors, 2 tactile switches. 2×70-pin AVX Headers compatible with Overo COMs. Power – 3.5V-5V All Overo computers-on-module are compatible with Alto35 board, so you can just use existing software solutions such as Linaro Ubuntu, Robot Operating System, and the Yocto Project. Alto35 is available for $89 including the display (not the Overo module), […]

May 31, 2013 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

$25 Texas Instruments SensorTag is a Bluetooth LE Devkit with 6 Sensors

Yesterday, I wrote about Wimoto Motes, tiny Bluetooth LE devices with several sensors that can be controlled and monitored via an iOS app, and soon by an Android app, as well as Linux devices. Each mote costs $39 plus shipping, and one commenter mentioned the price may be a bit too high. A Google search for “bluetooth sensor” immediately brings TI SensorTag, which looks somewhat similar, except it is a Bluetooth LE development kit, includes 6 sensors (but no light sensor), and only costs $25 including shipping. SensorTag Specifications: Bluetooth 4.0 low energy (CC2541) SoC 6 sensors connected via I2C: IR Temperature sensor (TI TMP006) Humidity sensor (Sensirion SHT21) Pressure sensor (Epcos T5400) Accelerometer (Kionix KXTJ9) Gyroscope (InvenSense IMU-3000) Magnetometer (Freescale MAG3110) Power – Single cell coin cell battery (CR2032), quiescent current consumption of 8uA, allowing years of battery life. FCC, IC and ETSI certified solution Dimension – 71.2x36x15.5 mm, […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

May 31, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 112 Comments

$32 iPush Wi-Fi DLNA / Miracast Adapter for Android

Last time I wrote about Miracast / DLNA dongles, the price was about $55, but today I’ve found a new device closer to my target price ($25) with IPUSH Miracast adapter that sells for $31.90 on DealExtreme. [Update: Several users report it’s only a DLNA dongle, and it does not support Miracast yet] Here are the specifications according to DealExtreme: SoC – Allwinner A10s Cortex A8 + Mali-400 GPU Wi-Fi 802.11b/g/n USB – 1x micro USB port for power Video Output – HDMI 1.4 Supports DLNA and Miracast mode Power – 5V / 0.5A The device comes with an HDMI cable and a micro USB cable used to connect the device to your TV HDMI and USB ports, or if your TV lacks USB, a USB power adapter. However, I’ve done a little more research, and it turns out iPush is also a product designed by Action Semi, that just […]

May 31, 2013June 6, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 13.05 Release With Linux Kernel 3.10, Android 4.2.2, and Ubuntu Raring Ringtail

Linaro 13.05 has just been released with Linux Kernel 3.10-rc2 and Android 4.2.2. This is the first release with Ubuntu 13.04 (Raring Ringtail) images. There’s also Linux Linaro Stable (LSK) preview based on kernel 3.9.4. BeagleBone Black support has been added and preliminary hwpack and images are available, an Android Arndale image with virtual framebuffer is also available. You can now get a desktop environment (XFCE) on Aarch64 / ARMv8. Hardware packs with Real-time Linux kernel (PREEMPT_RT) can be downloaded for Pandaboard and Arndale. More work has gone into Aarch64, big.LITTLE HMP, and ARM virtualization (KVM). Finally an UEFI is available not only for Vexpress boards, but also Samsung Origen and Arndale boards, as well as Texas Instruments Pandabord and Beagleboard. Here are the highlights of this release: LAVA First prototype production run of LAVA Lmp completed, tested functional. Beaglebone Black is now running in LAVA. TC2s is now running […]