Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Quick 3D Game Performance Comparison – Rockchip RK3188 vs AllWinner A31 HDMI TV Sticks

Quick 3D Game Performance Comparison – Rockchip RK3188 vs AllWinner A31 HDMI TV Sticks

When comparing SoCs, most like to look at the overall score, and as I mentioned this morning, Tronsmart T428 (based on RK3188) easily beats Kimdecent CS868 (Based on A31) in Antutu benchmark, the former scoring 15207 points against 10559 points for the latter, both using stock firmware, and similar resolution (1280×720 vs 1280×672). The difference in resolution is because the status bar was hidden in T428. If we look at GPU performance, both the 3D scores in Antutu are about the same for both devices: T428 CS868 2D Graphics 1549 998 3D Graphics 2696 2866 But according to an earlier GPU comparison post, PowerVR SGX544 MP2 should be much faster than Mali-400 MP4. So I’ve decided to perform two quick tests: Epic Citadel benchmark and Real Racing 3 game. T428 could render Epic Citadel 1.07 at 41.3 fps in high quality, but I failed to install Epic Citadel, either via […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Measy U4K – AllWinner A31 Powered Mini PC for 4K2K Video Playback

Measy U4K – AllWinner A31 Powered Mini PC for 4K2K Video Playback

Apart from CS868, I had not seen other HDMI TV sticks based on AllWinner A31, the main reason being the performance to price ratio, with RK3188 devices cheaper than AllWinner A31 ones, and benchmarks such as Antutu showing better score for RK3188. 2D/3D performance is about the same as RK3188 (based on Antutu benchmark), despite A31’s PowerVR SGX544 MP2 GPU. So the only remaining advantage of A31 over RK3188 is 4K2K (UHD) video playback, which is probably why Measy called their A31 mini PC “Measy U4K”. Measy U4K Specifications: SoC –  Allwinner A31 quad-core cortex A7 @ 1.0GHz + PowerVR SGX544MP2 GPU System Memory – 2GB dual channel 64-bit DDR3 Storage – 8GB Nand dual channel 16-bit Flash + micro SD card slot (Up to 32 GB) Connectivity – Wi-Fi 802.11 b/g/n (Ralink8188) + Bluetooth 4.0 USB – 1x micro USB OTG for power, and 1x USB 2.0 host Video Output […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Galapad Galaz is a Pyramidal Set-top Box

Galapad Galaz is a Pyramidal Set-top Box

Up to now, the set-top box with the most innovative or weird design, depending on who you ask, was certainly Tronsmart Prometheus with its spaceship-like casing. Another Chinese company called Galapad may have gone a bit further with a device shaped like a pyramid with blue lights at the top and bottom. We don’t know much details about this media player, except it comes with HDMI output, RJ45 and mini USB connectors, an audio jack, and a microSD card. The company’s other designs (all tablets) are based on Nvidia Tegra SoCs, so it’s likely this one, if it’s ever sold, will also feature Nvidia Tegra 3 or 4 processor. Via AndroidPC.es and PCPop

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Geniatech Releases ATV510B Source Code, Teases Dual and Quad Core ATV130 and ATV180 mini PCs

Geniatech Releases ATV510B Source Code, Teases Dual and Quad Core ATV130 and ATV180 mini PCs

XBMCHUB (not affiliated with XBMC) reports that Geniatech has released the Android and Linux source code for ATV510B, one of Geniatech set-top boxes based on AML8726-M3 Cortex A9 processor. ATV510B is the design used by devices such as Pivos XIOS DS, Jynxbox Android HD, Sumvision Cyclone Nano M3, and MyGica ATV510B Enjoy TV Nano 3, among others. Pivos has made U-boot, Linux and XBMC source code available in github for a little while now, but this new release is a pretty large file (2.39 GB) called xbmcandroid_com-ics-base-M3-20121212.tar.bz2 that includes Android 4.0 source including the kernel and the bootloader. This source code should work with “stvmc” hardware, as found in build.prop’s ro.product.name or ro.product.device keys. I haven’t looked into details, but here’s the content of the root directory of the archive: On a separate note, Geniatech also showed the picture below on their Facebook page, with 2 new Android TV Sticks: […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on WM8880-MID Dual Core Tablet is Now Available for $59

WM8880-MID Dual Core Tablet is Now Available for $59

Remember SunnyCube V7 tablet with a dual core Cortex A9 SoC available for just $40 in China? I had a target between $50 to $55 on Aliexpress, but I’ve been explained I may have been too optimistic with shipping fees and the 5% seller fee in Aliexpress platform. Nevertheless, the device, or a similar device, based on WonderMedia WM8880 is now available for $59 including shipping on GeekBuying, which puts it in slightly higher price (~$7 more) than AllWinner A13 tablets, but with much more processing power, and HDMI output. Here are some updated specs: SoC – VIA WM8880 Dual core Cortex A9 processor @ 1.5GHz + Mali-400 MP2 GPU System Memory – 512MB DDR3 Storage – 4GB Flash + micro SD slot Display – 7-inch WVGA (800×480) display Video Output – HDMI port Video Playback – H.264, WMV, MPEG2/4, VP8 (up to 1080p) Connectivity – Wi-Fi 802.11 b/g Camera […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on MiTAC Announces 7-Star 64-Bit ARM Server Powered by Applied Micro X-Gene Server-on-Chip

MiTAC Announces 7-Star 64-Bit ARM Server Powered by Applied Micro X-Gene Server-on-Chip

After unveiling their GFX servers based on Marvell ARM Cortex A9 SoC at Computex 2012, Mitac announced their new 7-Star server at Computex 2013. This new server is based on Applied Micro X-Gene SoC featuring ARMv8 architecture, and is one of the first, if not the first, 64-Bit ARM server ever. The key features of Mitac Server are as follows: 18x Front-loaded Computing Blades in 4U (176mm x 440mm x 650mm) Server Blade Spec SSI uModule v1.0 complaint (1) ARMv8 compliant 64-bit SoC /blade (2) DDR3 DIMM slots, and (2) 2.5” SATA 3.0 HDD support (1) 10G SFP+ and (1) GbE port IPMI V2.0 compliant Pass-through Ethernet Module Chassis Management Hot-swap FAN and (2+1) RPSU support It will be available by the end of the year. That’s about all I know for now, but more information should eventually come up on Mitac 7-Star page. Via PC Perspective.

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 24 Comments on Rockchip RK3188 Linux Source Code is Now Available

Rockchip RK3188 Linux Source Code is Now Available

Good news! I’ve just read Rockchip RK3188 Linux source code has just been released via Rikomagic, and Alok Sinha, the main maintainer of RK3066 source code, has already imported into github, and we should soon see a PicUntu image for RK3188 mini PCs. Let’s have a look:

[Update: you may have to run “sudo apt-get install libc6-i386” before running make_kernel_ruikemei.sh below, as mkkrnlimg is a 32-bit binary] Usually, I immediately look into arch/arm/configs, but this time, there’s a “funny” script called make_kernel_ruikemei.sh, and .config already have some CONFIG_RK3188, so let’s run it:

After just over a minute, success!:

This kernel image is for Android only, and there’s a little work to modify it as a “pure” Linux kernel, so that it can be used to boot PicUnutu for RK3188. Let’s go back to arch/arm/configs, and we’ll find several RK3188 configs: rk3168_86v_defconfig rk3188_dongle_defconfig rk3188_ds1006h_defconfig rk3188_ds1006h_v1_0_defconfig rk3188_hotdog_defconfig rk3188_LR097_defconfig rk3188_magicwand_defconfig […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Calxeda Showcases Aaeon and Foxconn ARM Servers at Computex 2013

Calxeda Showcases Aaeon and Foxconn ARM Servers at Computex 2013

ARM started to get involved in servers in 2011 with the announcements of Calxeda Energy Core, Marvell, and Applied Micro X-Gene Servers-on-a-Chip, and in 2012, products made by companies such as HP and Mitac  started to appears. We’ve got to see some more ARM based servers this year thanks to Charbax, who filmed some Aaeon and Foxconn servers powered by Calxeda EnergyCore quad core ARM Cortex A9 SoC at Computex 2013. The first server is Aaeon Indus 1U cloud storage appliance: 1U Chassis 2x Calxeda Energycore nodes 10x 3.5″ HDD 2x 10 GbE uplinks and 4x 10GbE chassis-to-chassis interconnects Foxconn server shown at Computex has slightly higher specs: 4U chassis 12 Calxeda Energycore nodes 60x 3.5″ HDD for up to 240TB storage 4x 10 GbE uplinks and 6x 10 GbE chassis-to-chassis interconnects for 100 GbE total bandwidth There’s also a Gigabyte server, but I could get details. Server based on […]

Boardcon Rockchip and Allwinner SoM and SBC products