Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Polaroid Socialmatic Android Camera Prints Photos on The Go

Polaroid Socialmatic Android Camera Prints Photos on The Go

Polaroid used to make instant cameras allowing you could take a picture, and print it immediately. As digital photography became more and more popular, this type of cameras mostly disappeared, but Polaroid is giving it another go with Socialmatic camera running Android, that can print regular pictures and even selfies thanks to its rear and frontal cameras, using its embedded ZINK Zero Ink printer. Polaroid Socialmatic specifications: SoC – Unnamed ARM processor System Memory – N/A Storage – 4GB Internal Storage + micro SD card slot Cameras – 14MP frontal camera with LED flash, 2MP rear camera Display – 4.5″ Touchscreen LCD with Mood Assistant A.I. Audio – Stereo Speakers Connectivity – GPS, WiFi and Bluetooth Remote Printing Capabilities, 2″x3″ Zink Instant Filters USB – Micro USB port for charging and file transfer? Battery – Rechargeable lithium-ion battery Dimensions – 13.2 cm x 13.2 cm x 3.0 cm Since the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Arduino UNO R3 Clones Now Cost Less than $5

Arduino UNO R3 Clones Now Cost Less than $5

An original Arduino UNO R3 costs about nearly $25, and I remember clones would cost about $10 on Aliexpress, but today I’ve been informed about VISduino, an Arduino UNO R3 clone, with some cost optimizations such as cheaper components and connectors, which sells for just 15.50 CNY (~$2.50 US) on Taobao, and $4.90 on Electrodragon. But double checking on Aliexpress, I could find another popular Arduino UNO R3 clone for $4.58 including shipping, but no USB cable. Both boards cut costs by replacing ATmega16U2 by CH340 USB to serial chip, and replacing the ATMEGA328P-PU MCU (DIP) by an SMT version of the Atmel MCU such as ATMEGA328P-AU (QFP). Other changes on VISduino include: Replaced USB B-type connector by a micro USB port Added extra through holes side-by-side with the Arduino headers for easier debugging. Extra 2×4 pin holes with TX, RX, VCC, GND, and I2C pins You may have to install […]

ArmSoM CM5 Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Hisilicon Hi3798M Quad Core Android TV Box with USB 3.0, and 4K / HEVC Support Sells for $53

Hisilicon Hi3798M Quad Core Android TV Box with USB 3.0, and 4K / HEVC Support Sells for $53

I’ve been informed about a quad core Cortex A7 TV box supporting 2160p output, H.265 codec and featuring a USB 3.0 port, that’s currently selling for just $52.99 on Aliexpress including shipping, as well as Ebay for $62 from the same seller. Only “quad core ARM cortex A7” was listed in the specs, and the exact processor was not mentioned, but I could see marketing material about “Q3 quad core” used, and a quick search redirected me to Himedia Q3 Quad Core also powered by an Hisilicon processor, but a different device. So I decided to contact the seller (“Buyforsure”) who quickly replied it was indeed powered by Hisilicon Hi3798M processor. The model is called BFS 4KH on Aliexpress/Ebay, but that name has probably been made up by the seller, so it will also be found under other name. Nevertheless here are the specifications of this low cost 4K TV […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on Allwinner H3 is a Quad Core SoC for Sub $50 4K H.265 Media Players

Allwinner H3 is a Quad Core SoC for Sub $50 4K H.265 Media Players

Allwinner launched their H-series processors (Homlet) for home entertainment with Allwinner H8 octa-core processor, supporting HEVC up to 1080p, which will find its way into media players selling between $50 and $80. The company has now added Allwinner H3 quad core processor, selling for just $6, which will be available in $35 to $50 OTT TV box later this month, and include support for 4K UHD H.265/HEVC video playback. Key features of Allwinner H3: CPU –  Quad core Cortex A7 GPU – Mali-400MP2 up to 600 MHz Memory I/F LPDDR2, LPDDR3, DDR3, DDR3L SDRAM 8-bit SLC, MLC, TLC, EF NAND with 64-bit ECC SD, eMMC, tSD, fSD, and efSD Video Decoding – H.265/HEVC and H.264 up to 4K@30 fps, H.264 BP/MP/HP, VP8, MPEG1/2, MPEG4 SP/ASP GMC, H.263 including Sorenson Spark, WM9/VC1, JPEG/MJEPG up to 1080p60 Encoding – H.264 up to 1080p30 Video Output – HDMI with HDCP, CEC, 3D function, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Merrii A80 Hummingbird Octa-core Development Board Supports HDMI, VGA, and eDP Video Outputs

Merrii A80 Hummingbird Octa-core Development Board Supports HDMI, VGA, and eDP Video Outputs

Up to now at least three boards based on Allwinner A80 processor were available: A80 OptimusBoard by Merrii, pCDuino8 by Linksprite, and Cubieboard4  by Cubitech, and the first two boards are basically the same. Merrii has now introduced a new board which they call “A80 Hummingbird H8”, with more features and ports including HDMI, VGA and eDP video outputs,  LVDS / MIPI DSI display interfaces, MIPI CSI camera interface, an RTC with battery and more. Merri H8 specifications: SoC – AllWinner A80 octa-core processor with 4x Cortex 15, 4x Cortex A7 cores in big.LITTLE configuration with Imagination Technologies PowerVR GC6230 GPU compliant with OpenGL ES 3.0/2.0/11, OpenCL 1.1, and DirectX 9.3 System Memory – 2GB DDR3 Storage – 8GB internal storage (Sandisk SDIN7DU2 iNAND Flash), micro SD slot up to 32 GB Video Output/ Display Interfaces HDMI 1.4 up to 4K UHD resolution VGA port eDP v1.2 up to 2560×1600 @ […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Unboxing of MINIX NEO X8-H Plus Quad Core Android Media Hub

Unboxing of MINIX NEO X8-H Plus Quad Core Android Media Hub

MINIX NEO X8-H Plus is an update to the popular NEO X8-H, replacing Amlogic S802 by Amlogic S812 processor, which adds HEVC/H.265 hardware video decoding up to 4K UHD (2160p),  as well as Gigabit Ethernet. The new version also supports 802.11ac Wi-Fi. GearBest agreed to send me one sample for review. First. I’ll post picture of the device, and the board, before writing a full review in a few days. MINIX NEO X-8H Plus Unboxing Pictures and Video The company sent me the box by DHL, and which I got within a few days together with a document reading “Inbound Charges Invoice” in order to pay import taxes to my local government, and the courier’s service charge. Th device comes in the usual black, gray and green package from MINIX, customize with NEO X8-H Plus module, and highlighting support for H.265/HEVC 2160p, and Dolby Digital Plus. The media player, or […]

Rockchip RK3568, RK3588 and Intel x86 SBCs abd SoMs
Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on Allwinner A83T Tablet Unboxing, First Boot, and Benchmarks

Allwinner A83T Tablet Unboxing, First Boot, and Benchmarks

Allwinner & HonHai Precision Industry, better known as Foxconn, sent me an Infocus tablet based on Allwinner A83T processor with eight Cortex A7 cores up to 2GHz, and a PowerVR SGX544 GPU. Today, I’ll list the specifications of this tablet, show unboxing pictures, first boot video, and run Antutu benchmark. Infocus New Tab CS1 A83 / C2107 Specifications The invoice calls the tablet “New Tab CS1 A83”, but Android reports the model as C2107, so I’m not fully sure what will be the actual name. It might well be New Tab CS1 A83, as I could find an Infocus an earlier Infocus New Tab CS1 tablet powered by Allwinner A31. Anyway, here are the specifications I could derive from the device, and running Antutu/CPU-Z on the device: SoC – Allwinner A83T octa-core ARM Cortex-A7 @ 2.0 GHz with PowerVR SGX544MP GPU supporting OpenGL ES 2.0/1.1, OpenCL 1.1, DX 9.3. System […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 69 Comments on Zidoo X9 Android Media Player Features an HDMI Input Port with PVR & Time Shifting Functions

Zidoo X9 Android Media Player Features an HDMI Input Port with PVR & Time Shifting Functions

I’ve recently tested two Android TV boxes with an HDMI input, namely HPH NT-V6 and M-195, and with the firmware they had at the time of review, the HDMI input just acts as a dumb HDMI input port, and there was nothing much I could do with it. Now comes Zidoo X9, another Android TV box powered nby Mstar MSO9810 that also comes with an HDMI input port, but this time, they’ve implemented a PVR function, so if you have a low end satellite, cable, or terrestrial receiver, you can connect it to Zidoo X9 and record programs, which makes it much more useful. Zidoo X9 specifications: SoC – Mstar MSO9180D1R quad core Cortex A9 processor up to 1.5GHz with octa-core ARM Mali-450MP6 GPU Mali-450MP (2 or 4) GPU System Memory – 2GB DDR3 Storage – 8GB eMMC flash + micro SD slot Video Output / Input –  HDMI output […]

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...