CNX Software - Embedded Systems News

November 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

ELEGOO OrangeStorm Giga is an enormous 3D printer that supports up to four nozzles (Crowdfunding)

If you’ve found yourself frustrated more than once because the build volume of your 3D printer was too small for your prints, the ELEGOO OrangeStorm Giga should meet most people’s requirements as the enormous 3D printer offers an 800 x 800 x 1,000mm building volume, and can also be fitted with four nozzles and filament spools to print multiple objects at the same time. Besides the ability to print larger objects and multiple objects, you won’t need to find a table for it, since the gigantic 3D printer would typically be installed on the floor. Those large 3D printers have been available to businesses for years, but it’s the first time I’ve seen a consumer-grade 3D printer with those dimensions! ELEGOO OrangeStorm Giga specifications: Build Volume – 800 x 800 x 1,000mm Nozzle Maximum Temperature – 300°C Nozzle Diameter – 0.6mm Number of nozzles – 1, expandable to 4 Hot […]

November 24, 2023January 17, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

7-inch and 10.1-inch industrial panel PCs feature Raspberry Pi 5 SBC

After introducing several Raspberry Pi CM4-based panel PCs over the years, EDATEC has launched its first industrial panel PCs based on the Raspberry Pi 5 SBC with the HMI3010-070C and HMI3010-101C equipped respectively with a 7-inch and 10.1-inch touchscreen display. Both HMI displays expose most I/Os and features from the Raspberry Pi 5 including the two micro HDMI ports, the USB-C port for power, the four USB Type-A connectors, and the gigabit Ethernet RJ45 jack. The company also offers an 8MP front-facing camera and/or PoE as options. EDATEC HMI3010 specifications: SoC – Broadcom BCM2712 CPU – Quad-core Arm Cortex-A76 processor @ 2.4 GHz with crypto extensions, 512KB per-core L2 caches, 2MB shared L3 cache GPU – VideoCore VII GPU @ 800 MHz with support for OpenGL ES 3.1, Vulkan 1.2, 4Kp60 HEVC decoder System Memory – 4GB or 8GB LPDDR4X-4267 SDRAM Storage – Optional 32GB or 64GB MicroSD card Display […]

November 23, 2023November 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Banana Pi BPI-R4 WiFi 7 router board is powered by a MediaTek Filogic 880 processor

Banana Pi BPI-R4 is a WiFi 7 router board powered by the MediaTek MT7988A (Filogic 880) quad-core Arm Corex-A73 processor with 4GB DDR4 RAM, 8GB eMMC flash, and 128MB SPI-NAND flash. The board also comes with two 10GbE SFP cages, four Gigabit Ethernet RJ45 ports, a USB 3.2 port, as well as an M.2 socket for a 4G/5G modem or an NVMe SSD, and two mini PCIe slots with PCIe 3.0 to support WiFi 7. Banana Pi BPI-R4 specifications: SoC – MediaTek MT7988A (Filogic 880) quad-core Arm Corex-A73 processor @ 1.8GHz with AI-powered packet accelerator System Memory – 4GB DDR4 Storage – 8GB eMMC flash, 128MB SPI NAND Flash, microSD card slot, M.2 Key M for NVMe SSD (see Expansion section for details) Networking 2x 10GbE SFP cages (option for 1x 10Gbe SFP cage and 1x 2.5Gbe PHY) 4x Gigabit Ethernet RJ45 ports (1x WAN and 3x LAN) USB – […]

November 23, 2023November 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

KWS-302WF whole house WiFi power meter supports up to 63A, power control, features a color display

KWS-302WF is an inexpensive WiFi power meter with a color display and power control that is suitable for the whole house since it can handle up to 63A/17kW and supports DIN Rail mounting in a fuse box or cabinet. Installation is made through the neutral and live wires, and the display shows voltage, current, power, energy consumption, power factor, frequency, and temperature through an external temperature probe. Multiple KWS-302WF can be monitored and controlled through a mobile app which may make suitable suitable for apartment buildings as well. KWS-302WF specifications: Voltage range – 170-270V Current range – 0 to 63A Power range – 0 to 17 kW Energy range – 0 to 9999 kWh Timer range – 0 to 999 hours Temperature Range – -20 to +150°C (that is for the temperature sensor, and not the actual operating temperature range…) Frequency Range – 50 to 60 Hz Power Factor – […]

November 23, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arm Cortex-M52 aims to bring AI to small, low-cost IoT devices

Arm Cortex-M52 is a new microcontroller core featuring Arm Helium technology and designed to bring AI capabilities to smaller and lower-cost IoT devices than what is already possible with SoCs based on the Arm Cortex-M55 core. Arm Cortex-M52 key features and specifications: Architecture – Armv8.1-M Bus interfaces AMBA 5 AXI 32-bit or AMBA 5 AHB 32-bit Main system bus AMBA 5 AHB 32-bit Peripheral bus AMBA 5 AHB 32-bit TCM Access bus (subordinate port) Pipeline – 4-stage pipeline Security Arm TrustZone technology (optional), with optional Security Attribution Unit (SAU) of up to 8 regions. Stack limit checking. Optional support for PACBTI extension (Pointer Authentication, Branch Target Identification) Memory Protection – Optional Memory Protection Units (MPU) for process isolation with up to 16 MPU regions and a background region – if TrustZone is implemented, there can be a Secure and a Non-secure MPUs. DSP extension – 32-bit DSP/SIMD extension Optional single-beat […]

November 23, 2023November 28, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

GEEKOM Mini IT13 Review – Part 2: An Intel Core i9-13900H mini PC tested with Windows 11 Pro

Earlier this month, we had a look at GEEKOM Mini IT13 hardware, a mini PC powered by an Intel Core i9-13900H Raptor Lake processor and equipped with 32GB RAM, a 2TB NVMe SSD, 8K capable HDMI and USB-C video outputs, and several high-speed ports such as 2.5GbE and Thunderbolt 4. We’ve now had time to test the powerful mini PC with the preinstalled Windows 11 Pro operating system, in the second part of the GEEKOM Mini IT13 review, we’ll report our experience with the device with features testing, various benchmarks, power consumption number, and thermal performance under load. Software overview and features testing GEEKOM Mini IT13 ships with Windows 11 Pro 22H2 build 22621.23.61 and the System->About window confirms we have a mini PC powered by an Intel Core i9-13900H and equipped with 32GB RAM. HWiNFO64 provides more details about the Intel Core i9-13900H 14-core/20-thread Raptor Lake processor, the motherboard, […]

Rockchip RK3568/RK3588 and Intel x86 SBCs

November 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Theengs Bridge BLE to MQTT gateway supports Home Assistant, OpenHAB, Jeedom, NodeRed, and more

The Theengs Bridge is a new WiFi & Ethernet BLE to MQTT gateway running the open-source OpenMQTTGateway firmware, compatible with a range of sensors, and supporting Home Assistant, OpenHAB, Jeedom, NodeRed, and other MQTT-compatible systems. It follows the Theengs Plug smart socket introduced at the beginning of the board with many of the same features (minus the socket part…) but adds Ethernet and an external antenna for improved range, and improves modularity with a Grove I2C connector and mounting holes for a LoRa-E5-based Grove module and a prototyping area where you can solder your own circuitry with DIP components. Theengs Bridge specifications: Wireless module MCU – ESP32 microcontroller with WiFi and Bluetooth Storage – 8MB flash PCB antenna and u.FL antenna connector Connectivity 10/100M Ethernet RJ45 port 2.4 GHz WiFi 4 and Bluetooth LE with 6dBi 50Ohm external antenna Optional LoRa module via Grove I2C connector MQTT protocol Expansion – […]

November 22, 2023February 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MediaTek unveils 5G RedCap solutions: M60 5G modem and T300 Arm Cortex-A35 SoC

MediaTek has introduced its first 5G RedCap solutions with the M60 5G modem and the MediaTek T300 Arm Cortex-A35 SoC design to bring 5G-NR to wearables, light-weight AR devices, IoT modules, and consumer and industrial Edge AI devices. 5G RedCap (Reduced Capability), part of 3GPP Release 17, aims to keep some 5G features such as low latency, low power consumption, enhanced security, and network slicing while limiting the bandwidth (to around 85 Mbps) in order to be used in IoT devices and products that may not need the bandwidth required by smartphones and computers, but would benefit from longer battery life and a smaller footprint. MediaTek claims to be the first company to unveil 5G RedCap chips with the M60 modem and T300 SoC. MediaTek M60 key features and specifications: 3GPP Release 17 standard 5G modem R17 UE power saving R17 Coverage enhancement R17 Small data transmission LTE & NR-FR1 […]