Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on SZBOX DS135D – A dual-screen laptop with an Intel Processor N100 CPU

SZBOX DS135D – A dual-screen laptop with an Intel Processor N100 CPU

Dual-screen laptop Intel Processor N100

A few companies have been making dual-screen laptops – where one of the screens is placed where you’d typically find the keyboard and touchpad – for several years, and this type of design was brought back to the forefront with the Lenovo Yoga Book 9i introduced earlier this year with two 13.3-inch displays and a 13th-gen Intel Core Raptor Lake-U processor for $2,000 and up. If you like the concept but don’t quite have that much money to spare, SZBOX DS135D dual-screen laptop is a much cheaper option with two 13.5-inch displays, an entry-level Intel Processor N100 SoC, 16GB DDR5, and 128GB to 2TB NVMe SSD going for $699 and up on Aliexpress. SZBOX DS135D specifications: SoC – Intel Processor N100 quad-core processor up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 16GB DD5 Storage – 128GB to 2TB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Microflex MCUs – Tiny USB development boards based on ESP32-S3, ESP32-S2, ESP32-C3, ESP32-C6, or Raspberry Pi RP2040 (Crowdfunding)

Microflex MCUs – Tiny USB development boards based on ESP32-S3, ESP32-S2, ESP32-C3, ESP32-C6, or Raspberry Pi RP2040 (Crowdfunding)

Microflex MCU board with ESP32 and RP2040 microcontrollers

SB Components is back with yet another crowdfunding campaign this time with the Microflex MCUs USB development boards all with the same tiny form factor and offered with a choice of five microcontrollers namely Raspberry Pi RP2040, ESP32-S3, ESP32-S2, ESP32-C3, or ESP32-C6. Microflex MCUs share the same layout with a USB-C port for power and programming, a built-in RGB LED, two buttons for Boot and Reset/User, and two rows of 10-pin with through and castellated holes to access the GPIOs and power signals such as 5V, 3.3V, and GND. But they differ in terms of the processor used, wireless features, and available I/Os as shown in the table below which sadly lacks any information about the flash and eventual PSRAM… The illustration below includes some more details for the Micro-C6 with the main components, ports, and a pinout diagram. Programming the firmware for the ESP32-series can be done through the […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on STMicro VD55G1 – A small, low-power global shutter I3C camera sensor for computer vision

STMicro VD55G1 – A small, low-power global shutter I3C camera sensor for computer vision

STMicro VD55G1 global shutter camera sensor

STMicro VD55G1 is a new global shutter I3C camera sensor with a small die size of 2.7 x 2.2 mm, 804 x 704 pixels native resolution, and consuming about 1mW in its ‘always-on’ autonomous mode to wake up the host when motion is detected. Camera sensors are available with rolling or global shutter, with most from the former type, but as we’ve seen in our reviews of the e-Con Systems See3CAM_24CUG (USB 3.1) and the Raspberry Pi Global Shutter (MIPI CSI) global shutter cameras, the latter is much better we capturing moving objects clearly at high frame rates with fewer artifacts than with rolling cameras. The VD55G1 global shutter sensor will also benefit from the same advantage but is offered in a smaller package working over MIPI CSI and/or I3C, making it suitable for devices with small batteries used in applications such as eye tracking or motion estimation. STMicro VD55G1 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on CWWK x86-P5 fanless mini PC with two 2.5GbE ports ships with up to Intel Core i3-N305 CPU

CWWK x86-P5 fanless mini PC with two 2.5GbE ports ships with up to Intel Core i3-N305 CPU

x86-P5 mini PC

CWWK x86-P5 is a fanless mini PC powered by an Intel Alder Lake N-series N100 (quad-core) or Core i3-N305 (octa-core) and equipped with two 2.5GbE ports using Intel i226V controllers making it suitable for networking applications such as a firewall or a soft router. But it’s also a standard mini PC with two HDMI 2.0 ports, two USB 3.2 ports, and up to four USB 2.0 ports making it a candidate to run Promox with both a desktop OS like Windows 11 or Ubuntu 22.04 and a networking OS such as pfSense or OpenWrt. CWWK x86-P5 specifications: Alder Lake-N SoC(one or the other) Intel Processor N100 quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel UHD graphics; TDP: 6W Intel Core i3-N305 octa-core processor @ up to 3.8 GHz (Turbo) with 6MB cache, 32EU Intel UHD Graphics; TDP: 15W System Memory – Up to 32GB DDR5 […]

Posted on by Aditi Ambadkar - No Comments on TQ MBa8MP-RAS314 i.MX 8M Plus single board computer targets industrial, medical, and transportation applications

TQ MBa8MP-RAS314 i.MX 8M Plus single board computer targets industrial, medical, and transportation applications

MBa8M-RAS314

TQ has recently introduced a single board computer (SBC) called MBa8MP-RAS314. This industrial SBC is built on the TQMa8MPxL embedded module powered by the i.MX 8M Plus Arm Cortex-A53 processor developed by NXP and incorporates all the interfaces of the processor. The MBa8MP-RAS314 single board computer (SBC) finds many applications across various industries due to its features and versatility. In the medical field, it can be found in equipment for sleep monitoring, HMI eye laser systems, dialysis system control, and patient monitoring. In transportation, it can be used for in-vehicle diagnostics and acts as a gateway. Its capabilities extend to industrial automation, where it contributes to optical inspection systems, soft PLCs, programmable control, machine control, and maintenance systems. Specifications: CPU/Processor NXP i.MX 8M Plus Quad 8 ML/AI NXP i.MX 8M Plus Quad 6 Video NXP i.MX 8M Plus Quad 4 Lite Memory/Storage LPDDR4-SDRAM: Up to 8 GB Quad SPI NOR: […]

Posted on by Tomisin Olujinmi - No Comments on RoomSense IQ – An ESP32-S3 modular room monitor with mmWave radar presence detection (Crowdfunding)

RoomSense IQ – An ESP32-S3 modular room monitor with mmWave radar presence detection (Crowdfunding)

roomsense iq mount rotation v2

RoomSense IQ is a modular room monitor for presence-based home automation based on the ESP32-S3 module with Bluetooth Wi-Fi connectivity. It uses physical presence detection to automate your smart home devices. It comes with multiple sensors that can be used to detect human activity and track ambient light, temperature, and humidity levels. It uses mmWave radar technology to determine when rooms are empty and when they are occupied. It also features built-in temperature, humidity, and light sensors for indoor climate monitoring and control. Rather than relying on schedules, or voice detection, RoomSense IQ triggers automations or alerts based on whether people are in a room or not. It is therefore possible to set it to automatically turn off lights or air conditioning in rooms that are empty to save on energy. In addition, the device offers distance to target measurement that can be adjusted to trigger certain actions. RoomSense IQ […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Raspberry Pi releases PCIe FFC connector specifications, new HAT+ standard

Raspberry Pi releases PCIe FFC connector specifications, new HAT+ standard

Raspberry Pi 5 PCIe pinout and FFC cable

Raspberry Pi has released two new specifications one for the PCIe FFC connector and related cable and the other for the new Raspberry Pi HAT+ (HAT Plus) standard that’s simpler, takes into account new features in Raspberry Pi 4/5, and has fewer rules around mechanical dimensions. PCIe FFC connector specifications The Raspberry Pi 5 was announced over 2 months ago with a new PCIe FFC connector, and people may been playing around with it and even launching products such as an M.2 HAT for the Raspberry Pi 5 since then even though the pinout and specifications were not available. But Raspberry Pi has now released the specifications (PDF) for the PCIe FFC found in the Raspberry Pi 5 and likely future models as well. The 16-pin 0.5mm pitch FFC connector features a single lane PCIe interface, something we knew already, but the pinout diagram and recommendations for the FFC cable […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on UP 7000 SBC review – Part 2: Ubuntu 22.04 on a fanless Intel N100 single board computer

UP 7000 SBC review – Part 2: Ubuntu 22.04 on a fanless Intel N100 single board computer

UP 7000 Ubuntu 22.04 review

The UP 7000 is a credit card-sized Alder Lake-N single board computer that can be used as an alternative to the Raspberry Pi 5 for industrial applications. AAEON sent me a model with an Intel Processor N100 CPU, 8GB LPDDR5, and a 64GB eMMC flash, and I went through an unboxing in the first part of the review, compared its mechanical design to the earlier UP 4000 and Raspberry Pi 5 SBC , and also installed Ubuntu 22.04 since the UP 7000 board did not come with any OS and would initially boot to the UEFI shell. I’ve now spent more time with the board and I will report my experience with the UP 7000 SBC running Ubuntu 22.04 in this article checking out features, performance, video playback, power consumption, and so on using the UP 4000 review with Ubuntu 22.04 I did last year as a template plus some […]

Khadas VIM4 SBC