Hardware Category - Page 1049 of 1116 - CNX Software

May 10, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Jesurun A19 and Mele M5 Android STBs Powered by AllWinner A20

After Cloudsto A20 Media PC, and GV-17, we’ve now got more choices for AllWinner A20 based Android set-top boxes with Jesurun A19 and Mele M5, both featuring 1GB RAM, and running Android 4.2, with the former fitted with 4GB NAND flash and the latter 8GB. Those are ones of the few devices featuring SATA support, and optical SPDIF. Jerusun A19 also comes with VGA output. Jesurun A19 Specifications: SoC – Allwinner A20 dual core Cortex A7 up to 1.2 GHz + Mali-400 MP2 GPU System Memory – 1GB DDR3 RAM Storage – 4GB NAND Flash + SD card slot (up to 128GB) + SATA interface Video Output – HDMI up to 3840 X 2160 (UHD), VGA and AV Video Decoding – Up to 1080P@60fps Audio Output – HDMI + SPDIF (Optical) Connectivity – 10/100M Ethernet + Wi-Fi 802.11 b/g/n USB – 4x USB ports IR sensor Power Adapter – 5V/2A Weight […]

May 9, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

AllWinner A31 Mele Media Player Pictures, Screenshots and Antutu Benchmark

Mele A1000G Quad is an Android set-top box featuring AllWinner A31 quad core Cortex A7 processor with 2GB RAM and 8GB Flash. You can check the full specifications in my previous post. Eddy Lab got hold of an engineering sample with a similar model but without SATA that looks like A3700 [Update: Model name is apparently G39A04], and he, or they, took a few pictures, and tested the device (Link in Korean). I’ll re-post some of their unboxing pictures, and share some of their screenshots and benchmarks in this post. The device comes with a 5V/2.4A power adapter, an HDMI cable, and an IR remote. The device features an Audio out jack, a micro USB socket, a power jack, and HDMI connector, an RJ45 Ethernet connectors, 3x USB host ports, SPDIF output (Optical), and an SD card slot. It’s very similar to the original Mele A1000 except VGA and AV […]

May 9, 2013May 9, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Earl Rugged E-ink Tablet for the Outdoors

Earl is a rugged Android 4.1 Android Tablet with all you need for the outdoors including a 6″ E-ink display to be readable in all light conditions, GPS capability, and 20 hours of battery life. And if it’s not enough, you can also recharge this water-proof device with the built-in solar panel on your way to the mountain top. Here are the specifications of this device: SoC – Freescale i.MX 6 DualLight Cortex A9 @ 1GHz + Vivante GC880 GPU System Memory – 1GB Storage – 16GB flash + microSD slot Display – Flexible 6″ E-ink screen (1024×768), with glove friendly IR touchscreen Connectivity – Wifi b/g/n, BT 4.0, ANT+, NFC, FRS/GMRS/MURS, and GPS + GLONASS Sensors – Accelerometer, Gyroscope, Magnetometer, Temperature, Barometer, Humidity, and Anemometer Misc – Radio AM/FM/SW/LW + IR blaster Battery – 3000 mAh (20+ hour) rechargeable with solar panel or via the provided 20″ USB lanyard. […]

May 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

$99 KDDI AU Smart TV Stick Powered by TI OMAP4430

KDDI, a Japanese Telecom operator, has launched AU Smart TV Stick, an Android 4.0.4 HDMI TV Stick powered by Texas Instruments OMAP4430 dual core processor with 1GB RAM, and 4 GB Flash, together with a “magic” Bluetooth remote for 9,800 Yen ($99 US). Here are the specifications of this device: SoC – Texas Instruments OMAP4430 Dual Core Cortex A9 @ 1GHz + PowerVR SGX540 GPU System Memory -1GB RAM Storage – 4GB Flash + microSD card slot Connectivity: Wi-Fi IEEE802.11b/g/n Bluetooth 2.1 + EDR Video Output – HDMI (female) USB – micro USB OTG Power – AC100V Dimensions – 31 × 105 × 14mm Weight – 45g The Bluetooth remote measures 50 × 149 × 21.5mm, weights 73 g, and comes with a gyro sensor. The package included the mini PC, the remote, as well as an AC adapter (100V), an HDMI Cable, a holder, and 2 AAA batteries for […]

May 8, 2013May 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Review of Bluetimes MX5 Android 4.2.2 Set-top Box

Bluetimes MX5 is an Android 4.2.2 set-top box powered by AMLogic AML8726-MX that costs around $70, or about $30 less than devices with similar hardware such as G-Box Midnight MX2 or Tronsmart Prometheus. AndroidPC.es got hold of one sample, also called 10moons D6, took some pictures and reviewed the devices for us. Bluetimes MX5 Unboxing The package contains the media player, an RF remote control and a power adapter, but no cables, which is one way to save on costs. Looking at the rear panel of the device front left to right, we can see an external Wi-Fi antenna, the 5V power jack, one USB port, a composite RCA connector and stereo RCA output, an Ethernet RJ45 port, HDMI output, and SPDIF output. An SD card slot and another USB host port are located on the front panel. So Bluetimes MX5 just has 2 USB ports, which is a bit […]

May 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Micromint Bambino 200 and 200E Dual ARM Cortex M SBC Support .NET Gadgeteer and mbed Applications

Micromint, a US based supplier of single-board computers and industrial embedded controllers, has just announced Micromint Bambino 200 and 200E single board computers powered by NXP LPC4330 dual core Cortex M4/M0 MCU @ 204Mhz. Those 2 boards support .NET Gadgeteer and mbed frameworks. Key Features of Micromint Bambino 200: NXP LPC4330 Dual core ARM Cortex-M4/M0 @ 204 MHz with 264 KB SRAM. Storage – 4MB SPI flash USB – High-speed USB 2.0 device port used both as a power source and for data communications or debugging Misc – 2 buttons, 2 LEDs 5 Gadgeteer sockets Dimensions- 101.6 x 58.4 mm Bambino 200E is based on the same platform but adds: Storage – 8 MB SPI Flash (vs 4MB) 10 Gadgeteer sockets 10/100 Mbps Ethernet microSD socket Xbee socket Power jack – 7 – 15 VDC The company also explains that a JTAG for low level debugging, a coin cell battery […]

May 6, 2013May 6, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Coocox Embedded Pi is an STM32-Based MCU Board That Connects to Arduino Shields and Raspberry Pi

Embedded Pi is a platform capable of interfacing the Raspberry Pi with 3.3V and/or 5V Arduino shields, based on an 32-bit ARM Cortex M3 STMicro STM32 MCU. It can also be used in standalone mode as an Arduino compatible ARM MCU evaluation board. Embedded Pi Hardware Specifications: MCU – STMicro STM32F103RBT6 Cortex M3 @ 72MHz with 20KB SRAM and 128KB flash. Raspberry Pi Connector with I2C, SPI, UART, PWM and GPIOs Arduino Interfaces – 1x SPI, 1x I2C, 4x PWM, 1x UART, 6x Analog Input Extended Interfaces – 1x SPI, 1x I2C, 1x UART with flow control, 2 pairs PWM, 6x Analog Input, and 1x CAN 3 Power Sources – Micro USB port, external DC adapter, and 5V from the Raspberry Pi Depending on the jumper placement on the Embedded Pi, you can select each of the three modes of operation: STM32/Standalone Mode – The Embedded Pi works as an […]

May 6, 2013May 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 157 Comments

Matricom G-Box Midnight MX2 Android TV Box Review

Matricom sent me one of their latest G-Box Midnight MX2 media player based on AMLogic AML8726-M6, with 1GB RAM, 8 GB flash, running Android 4.2, and with full support for XBMC. This is an update of the G-Box Midnight based on AML8726-M3 which supports XBMC in Android, as well as XBMC Linux thanks to community builds. Specifications: SoC – Amlogic AML8726-MX Dual Core Cortex A9 CPU + dual core Mali-400 GPU System Memory – 1GB DDR3 RAM Storage – 8GB Flash + SD card slot (Up to 32GB) Video Output – HDMI v1.4, composite (CVBS) and component (YUV) Audio Output – HDMI, AV, and SPDIF Connectivity – 802.11b/g/n internal Wifi + 10/100 Ethernet Port USB – 4x USB 2.0 Ports (1 might be OTG) IR sensor Power Supply – 5V/2A The hardware and software is very similar to Tronsmart Prometheus (See review), as both are based on AML8726-MX, run Android […]