Hardware Category - Page 1026 of 1116 - CNX Software

August 29, 2013August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

iPazzPort NC-812-19A Rockchip RK3066 mini PC Temporary Discounted to About $30

I’ve just been informed about a special offer (for 2 more days) on Aliexpress for a mini PC based on Rockchip RK3066 called iPazzPort NC-812-19A, but it looks very much like CX803-II. You can get a dual core HDMI TV stick with 1GB RAM, 4GB Flash and an external antenna for about $30 including shipping here or here. Here are the specifications: SoC – Rockchip RK3066 @ 1.6 GHz + Mali-400 MP4 GPU System Memory – 1GB DDR3 RAM Storage – 4GB NAND flash + micro SD slot (up to 32GB) Video Output – HDMI 1.4 Connectivity – Wi-Fi – 802.11 b/g/n USB – 2x micro USB port (OTG + power) + 1x USB host port Power – 5V Dimensions – 101.2 x 48 x 9.5 mm Weight – 36g The device is said to come with a USB cable, and a user’s manual (No power supply). Aliexpress listings do not […]

August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Broadlink SP1 Wi-Fi Smart Socket Can Be Turned On/Off by Android or iOS Devices

Broadlink SP1 is a smart socket with Wi-Fi connectivity that you can control remotely with your Android or iOS mobile device through a specific app in order to turn on and off lights, water heater, and other electrical appliances. This type of product already exists for example with Belkin Wemo, but Broadlink SP1 is cheaper as it sells for $32.90 including shipping, against $49.99 + shipping for Belkin Wemo Switch. So let’s have a closer look. For this type of device there aren’t that many technical specifications, but they are very important as you need to make sure it matches your electrical grid specs, equipment power rating, and socket type: Material – ABS Power Plug – Three flat-pin plug (Australia type) Voltage – 90~245V @ 50-60 Hz Output Current – 10A Output Power – 2200W Dimensions – 8.9 cm x 7.7 cm x 5.8 cm Temperature Range – -10’C to […]

August 29, 2013August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

RK2928 Miracast Adapter (MOCREO M1) Is Now Available for $26

Rockchip (via Charbax) has been teasing us with their upcoming RK2928 miracast adapter since the Hong Kong Electronics Fair in April 2013. It appears a device is finally available on DealExtreme with MOCREO M1 (iPush) for $25.90 including shipping. It’s using the same casing as the other iPush or Ezcast (MSD03) HDMI sticks, but the guts of the device are different: Processor – Rockchip RK2928 single core ARM Cortex A9 @ 1.0 GHz System Memory – 256MB DDR3 Storage – 16 MB Serial Flash Connectivity – Wi-Fi: 802.11b/g/n Video Output – HDMI V1.4 Multi-screen protocol – DLNA / Airplay / Miracast Video Format – RMVB / WMV / ASF / AVI / 3GP / MPG / MKV / MP4 / MOV / MPEG2 / MPEG4 Audio decoding – MP3 / OGG / WAV / APE / CDA / MIDI / WMA / AAC; Power adapter: 5V / 1A (Micro USB) […]

August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

$25 Flutter is a Wireless Arduino compatible Board with Up to 1 km Range

There are already several ways to add wireless connectivity to your hardware project. For short ranges, we can use protocols such as Bluetooth (e.g. RFDuino, BLEDuino projects, or Bluetooth USB dongle), for much longer ranges 3G/4G connectivity may be required, and achievable via a 3G/4G USB dongle, or SparqEE CELLv1.0 project for example. But what if you want something in the middle with a range closer to 1km? Flutter boards using the 915MHz band (US only) can provide such range, and are software compatible with the Arduino. There are two version of the board: Flutter Basic – Board with an low-profile integrated antenna. It features micro USB for power, an LED, and a button, as well as several digital and analog I/O. Flutter Pro – Board with external antenna (and probably longer range). It comes with all features found in Flutter Basic, and adds battery charging, an additional button, and […]

August 28, 2013 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

iWave Systems Introduces RainboW-G16M µMXM SoM Powered by Freescale Vybrid ARM Cortex A5 / M4 SoC

iWave Systems has unveiled new microMXM system-on-modules powered by Freescale Vybrid dual core ARM Cortex-A5 @ 500Mhz and Cortex-M4 @ 167 Mhz SoC. Rainbow-G16M modules target applications that can leverage the Cortex M4 MCU for real-time tasks, and the Cortex A5 core for application processing such as industrial process control & kiosks , smart grid, medical / healthcare devices, smart connected devices, and battery operated handheld devices. Here are the module specifications: SoC – Vybrid VF6x Series Controller with ARM Cortex A5 core @ 500Mhz, and Cortex M4 core @ 167 MHz System Memory – 256 MB DDR3 (Expandable upto 1GB) Storage 256MB NAND Flash (Expandable up to 2GB) QSPI Flash (Optional) EEPROM (Optional) On Board peripherals support: On module 10/100 Ethernet PHY JTAG Header for processor (Optional) Open SDA Header (Optional) DIP Switch for boot settings (Optional) 314-pin MXM PCB Edge Connector Interfaces: 10/100 Ethernet PHY interface 2nd RMII […]

August 27, 2013November 19, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$49 (and up) Hex is an Arduino-compatible, Soon-to-be Open Source Nanocopter Kit

Do you remember Mecam, an upcoming $49 nanocopter with a camera? AFAIK, it’s not there yet, but a similar product with a similar price point is now “available” on Kickstarter. Hex nanocopters (quadcopter and hexacopter versions) are not voice-controlled, and do not come with a camera by default, but you can control them with iOS or Android mobile devices, and a camera can be fitted if needed. It comes as a kit, so you’ll have to assemble it yourself, and since it’s fully open source, you could even customize it to your taste. Hex specifications: Propellers – Size: 56×8.5 mm, Fits shaft: 1.0 mm Motors – Diameter: 7.0 mm, Length: 20 mm, Shaft diameter: 1.0 mm, Over 50,000 rotations per minute (rpm) Flight Control System: Flight control – Microwii Copter Processor – Atmel ATMega32u4 Gyro and Accel – InvenSense MPU6050 (6-axis) Battery – 350mAh battery (Flight Time – 7 minutes) […]

August 26, 2013August 26, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Migoal TransMaker TR10 and TR11 Transform Your Samsung Galaxy S3 / S4 into a 10.1″ or 11.6″ Tablet or Laptop

If you’ve got an Samsung Galaxy S3 or S4 smartphone, and sometimes, you’d like to use it with a larger screen and a keyboard, there’s now a solution with Migoal TransMaker. The device does something similar to Motorola Lapdock, but it can support both tablet and laptop modes thanks to a detachable keyboard dock. You can use it by sliding your phone at the back of the tablet screen. TransMaker TR10 and TR11 specifications (Tablet): Display: TR10 – 10.1″ IPS touchscreen panel (1280×800 resolution) TR11 – 11.6″ IPS touchscreen panel (1920×1080 resolution) Audio – 1x2W Speaker + 3.5mm earphone jack USB – 1x micro USB port Buttons – Home, menu, back, power on/off, volume +/- Power: 1x DC-in 5000mAh Lithium battery Dimensions TR10 – 263 x 181 x 10.7mm TR11 – 305 x 192 x 11.5mm Net weight – TR10: 525g, TR11: 620g TransMaker TR10 and TR11 specifications (Keyboard dock): […]

August 25, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MK823 Android Set-Top Box Features AllWinner A31s SoC

AllWinner A31s is a cost down version of AllWinner A31 quad core Cortex A7 processor that is designed for phablets, with support for lower LCD and camera resolutions. This means A31s may actually be better choice than A31 for media players since few make use of LCD and/or camera interfaces. MK823 is the first media player I’ve heard of that use A31s processor. Here are the specifications of the device: SoC- Allwinner A31S quad-core Cortex A7 @ 1.0 GHz with PowerVR SGX544 MP2 GPU System Memory – 1GB DDR3 Storage – 8GB NAND Flash + SD card slot (up to 32GB) Video Output – HDMI 1.4 Connectivity: 10/100M Ethernet 802.11 b/g/n Wi-Fi Bluetooth 4.0 USB – 3x USB 2.0 Host port (including one OTG) Power Supply – 5V/2A Dimensions – N/A Weight – N/A This 4.2.2 Android TB box comes with a 5V/2A power adapter, an HDMI cable, a USB […]