Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on Samsung unveils 256GB microSD Express card with up to 800MB/s read speeds

Samsung unveils 256GB microSD Express card with up to 800MB/s read speeds

SamSung MicroSD Express 256GB cards

Samsung has just started sampling its 256 GB SD Express microSD card (aka microSD Express card) with a sequential read speed of up to 800 MB/s through its PCIe/NVMe interface. The SD Express standard was first introduced in the SD specification ver 7.0 in 2018 adding pads for PCIe/NVMe interfaces in full-sized SD cards before the microSD Express standard was introduced in the SD 7.1 specification the following year. Since then, the SD association further improved the standard promising ever faster SD Express speeds up to 4GB/s and microSD Express speeds up to 2GB/s. Saying the adoption of the new SD Express and microSD Express standards has been slow would be an understatement, and the Samsung 256GB microSD Express card looks to be the world’s first such storage device. Looking at full-size SD Express cards, I could only find one on Amazon for $59.99 with 256GB capacity, 820 MB/s read […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Panthor open-source driver for Arm Mali-G310, Mali-G510, Mali-G610, and Mali-G710 GPUs to be part of Linux 6.10

Panthor open-source driver for Arm Mali-G310, Mali-G510, Mali-G610, and Mali-G710 GPUs to be part of Linux 6.10

Panthor open-source Arm Mali G610 GPU driver linux

Collabora has been working on the Panthor open-source GPU kernel driver for the third-generation Arm Valhall GPU (Arm Mali-G310, Mali-G510, Mali-G610, and Mali-G710) for around two years, and the code has just been merged in drm-misc meaning it should be part of the upcoming Linux 6.10 release sometime in July 2024. Many regular readers must already be familiar with the Panfrost open-source driver for Arm Mali GPUs as we’ve covered its development progress over the years. Panthor is a new kernel driver specific to the 3rd gen Valhall GPUs that still relies on the Panfrost driver residing in userspace, as explained by Boris Brezillon from Collabora. Furthermore, the existing Gallium “Panfrost” driver in Mesa has also received a merge request adding support for those GPUs (10th gen Arm Mali = 3rd gen Arm Mali Valhall) meaning popular targets such as the Rockchip RK3588 SoC with an Arm Mali-G610 MP4 GPU […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Industrial OpenWrt gateway features MediaTek MT7628 SoC, WiFi, LTE, and GNSS connectivity

Industrial OpenWrt gateway features MediaTek MT7628 SoC, WiFi, LTE, and GNSS connectivity

Atreyo AG-702 industrial OpenWrt gateway

Atreyo AG-702 is an industrial OpenWrt gateway based on the MT7628 processor with dual Ethernet and WiFi connectivity as well as a built-in LTE and GNSS modem supporting two SIM cards. The gateway is equipped with isolated RS485 and RS232 interfaces, two digital isolated inputs, one relay output, and a USB host port that can be used to connect a flash drive or USB converters to various other interfaces. It is housed in an anodized aluminum enclosure and supports a wide 14-60V DC input range suitable for industrial settings. Atreyo AG-702 specifications: SoC – MediaTek MT7628 MIPS processor at 580MHz System Memory – 256MB Storage – 32MB eMMC flash + 512MB NAND flash with ExtRoot support (overlay) Networking 100Mbps Ethernet WAN port 100Mbps Ethernet LAN port LTE/GPRS with dual SIM, 1x external antenna 2.4 GHz WiFi with 1x external antenna GNSS with active antenna support USB – 1x USB 2.0 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on Kaki Pi is a Raspberry Pi-inspired Renesas RZ/V2H AI SBC with four camera connectors, a PCIe 3.0 interface

Kaki Pi is a Raspberry Pi-inspired Renesas RZ/V2H AI SBC with four camera connectors, a PCIe 3.0 interface

Kaki Pi Renesas RZ/V2H SBC Raspberry Pi flavor

Japanese company Yuridenki-Shokai Co. Ltd will soon launch the Kaki Pi single board computer [update Aug 2024: now called Kakip] based on the just-announced Renesas RZ/V2H Arm microprocessor with a powerful 80 TOPS AI accelerator, with Raspberry Pi-inspired form factor and features such as the 40-pin GPIO header, the same PCIe 3.0 connector as found in the Raspberry Pi 5, and four 22-pin MIPI CSI connectors that look to be compatible with the Raspberry Pi cameras. The board also comes with up to 8GB LPDDR4,  a microSD card for the OS, a 22-pin MIPI DSI connector for a display, a gigabit Ethernet port, two USB 3.0 ports, two CAN Bus connectors, and other interfaces that make it suitable for robotics applications such as Autonomous Mobile Robots (AMR) and HSR (Human Support Robots) as well as IoT projects. Kaki Pi specifications: SoC – Renesas RZ/V2H CPU/MCU cores Quad-core Arm Cortex-A55 processor […]

Posted on by Sponsored Post - 1 Comment on Compex WLE7002E25 is a dual-band dual-concurrent WiFi 7 module in standard mini PCIe size (Sponsored)

Compex WLE7002E25 is a dual-band dual-concurrent WiFi 7 module in standard mini PCIe size (Sponsored)

Compex WLE7002E25 vs Qualcomm WK03.2 WiFi 7 mini PCIe module

In today’s hyper-connected world, reliable and high-speed wireless connectivity is no longer a luxury, but a necessity. WiFi standards have evolved rapidly. WiFi 6, which has been around for only a few years, is now being replaced by WiFi 7 or IEEE 802.11be. Equipment manufacturers are now rushing to phase in WiFi 7 products. Compex has released its latest WiFi 7 module WLE7002E25 to help shorten time to market. The Compex WLE7002E25 is a dual-band concurrent 2×2 2.4GHz and 2×2 5GHz radio based on Qualcomm’s Waikiki high-performance WiFi 7 chipset which is capable of over 10Gbps raw data rate. It is in a standard mini PCIe form factor. WiFi 7 in a Standard Mini PCIe Form Factor The standard mini PCIe footprint means that WLE7002E25 is readily compatible with existing systems and designs, particularly customers whose devices have been using WiFi 4 or WiFi 5 standard mini PCIe modules. This […]

Posted on by Tomisin Olujinmi - 1 Comment on Renesas RZ/V2H Cortex-A55/R8/M33 MPU comes with 80 TOPS AI accelerator for robotics and autonomous applications

Renesas RZ/V2H Cortex-A55/R8/M33 MPU comes with 80 TOPS AI accelerator for robotics and autonomous applications

Renesas RZ/V2H block chart

The RZ/V2H is the latest addition to the Reneasas family of 32-bit and 64-bit microprocessors. Renesas RZ/V2H microprocessor features four Arm Cortex-A55 application processing cores, dual Arm Cortex-R8 real-time processing cores, and one Cortex-M33 core for system management, as well as an AI accelerator with up to 80 TOPS (sparse) of performance. The RZ/V2H MPU includes the third generation of Renesas’ dynamically reconfigurable processor for AI (DRP-AI3) accelerator, a staple of the RZ/V series. The DRP-AI accelerator can run complex image AI models at a power efficiency of 10 TOPS per watt (TOPS/W), as much as 10 times higher than conventional microprocessors. Additionally, the RZ/V2H has another DRP that can be used in image processing and robotics applications. The board also comes with PCIe Gen3, USB 3.2, and Gigabit Ethernet for high-speed applications such as autonomous robotics and factory automation machine vision. It offers a performance boost over previous products […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on 2×2 Quad Display Board uses Raspberry Pi Pico W or ESP32-S3-WROOM-1 module to drive four displays (Crowdfunding)

2×2 Quad Display Board uses Raspberry Pi Pico W or ESP32-S3-WROOM-1 module to drive four displays (Crowdfunding)

Raspberry Pi Pico ESP32-S3 quad display board

SB Components’ 2×2 Quad Display Board is an MCU development board fitted with either a Raspberry Pi Pico W board or an ESP32-S3-WROOM-1 module used to drive four small color displays in square or round shapes. The board specifically features either four 1.54-inch square TFT displays or four 1.28-inch round displays, a microSD card, an RTC with coin-cell battery holder, and a USB-C port for power and programming, plus a few buttons. It may feel like it’s coming out of the but-why-because-we-can department, but the company expects it to be used for signage, interactive displays, art projects, portable devices, data loggers, education, and more. 2×2 Quad Display Board specifications: Main control (one or the other) Raspberry Pi Pico W MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM Storage – 2MB QSPI flash Wireless – WiFi 4 and Bluetooth LE 5.2 USB – 1x Micro […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on ADLINK MXA-200 5G IIoT gateway ships with Debian or Yocto Linux

ADLINK MXA-200 5G IIoT gateway ships with Debian or Yocto Linux

ADLINK MXA-200 5G industrial gateway

ADLINK MXA-200 is an NXP i.MX8M Plus-based 5G IIoT gateway running Debian or a Yocto-based Linux distribution with two RS-232/422/485 isolated serial ports, two gigabit Ethernet ports, two USB 3.0 port, and an operating temperature range of -20 to 70°C. The fanless gateway also features two M.2 slots for integrating Wi-Fi and/or 4G LTE or 5G modules, and ADLINK expected the MXA-200 to find its way into renewable energy applications, EV chargers, smart city and smart factory applications that require big data collection, cloud-based applications, and video related monitoring solutions. ADLINK MXA-200 specifications: SoC – NXP i.MX8M Plus CPU – Quad-core Arm Cortex-A53 processor @ 1.6/1.8GHz MCU – Arm Cortex-M7 real-time core @ 400 MHz GPU – Vivante GC520L 2D GPU, Vivante GC7000UL 3D GPU VPU – 1080p60 hardware decoder (HEVC, H.264, VP9, and VP8) and encode (H.265/H.264) AI accelerator – 2.3 TOPS NPU System Memory – 2GB or 4GB […]

Boardcon Rockchip and Allwinner SoM and SBC products