Posted on by Jean-Luc Aufranc (CNXSoft) - 24 Comments on Sub $100 Remix OS Laptops Powered by Allwinner A64 Processor Are Coming Our Way

Sub $100 Remix OS Laptops Powered by Allwinner A64 Processor Are Coming Our Way

Remix OS is a fork of Android making the popular operating system more suitable for desktop use with a start-up menu, better handling of multi-tasking, multi-window support, etc… It’s found in several tablets and TV boxes including Jide’s own Remix mini. But Charbax has showcased a few Remix OS laptop prototypes based on Allwinner A64 processor, with the video apparently shot from Allwinner office. The first model is a white 11.6″ laptop (1366×768) with Allwinner A64 quad core Cortex A53 processor, looking quite similar to Olimex DIY laptop prototype also based on A64, with 1 to 2GB RAM, 8GB to 32GB flash, and a “nice keyboard and touchpad”. The second model is based on the hardware, except the screen is larger (14.1″). It features HDMI output, two USB 2.0 ports, a micro SD slot, and a 3.5mm audio jack. Those two models are expected to sell between $80 and $100 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Mini Review of Doogee Smart Cube P1 Android Projector

Mini Review of Doogee Smart Cube P1 Android Projector

Doogee Smart Cube P1, or just Doogee P1, is an Android projector powered by a quad core Amlogic processor. I’ve already taken some pictures of the device, and gave it a quick try, so today, I’ll write a little more about my experience using it in standalone mode with an air mouse, as well as with an Android phone using both Miracast and DLNA. The device also supports Airplay, but I don’t think I have any compatible device, so I have not tried this mode. Doogee P1 in Standalone Mode with an Air mouse (or other wireless/USB input device) After connecting MINIX NEO A2 lite air mouse’s RF dongle to the only USB port on the device, I pressed the power button for 5 seconds to start it up, and boot is pretty fast in around 30 seconds. You’ll need to adjust the focus with the wheel button on the […]

ArmSoM CM5 - Raspberry Pi CM4 alternative with Rockchip RK3576 SoC
Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Boardcon’s Rockchip RK3288 Single Board Computer Runs Android 4.4/5.1, Supports 3G, GPS, 5 Display Interfaces and More

Boardcon’s Rockchip RK3288 Single Board Computer Runs Android 4.4/5.1, Supports 3G, GPS, 5 Display Interfaces and More

Rockchip RK3288 is back in the news this month, and after the announced of MiQi low cost board a few days ago, an high-end Rockchip RK3288 SBC has come to market with Boardcon EM3288 comprise of MINI3288 CPU module, and a features-packed baseboard with multiple ports and connectivity options, including SATA and a 3G modem. EM3288 board specifications: SoC – Rockchip RK3288 quad core ARM Cortex A17 processor up to 1.8 GHz with Mali-T764 GPU System Memory – 2G DDR3 Storage – 8 GB eMMC flash, SATA, and micro SD slot Video I/O HDMI 2.0 up to 3840×2160@60p (provided your TV/monitor support YUV444) VGA 1x 26-pin MIPI connector, 1x 40-pin LVDS (multiplexed with VGA), 1x 40-pin TTL LCD connector Audio Output / Input – HDMI, Line IN and OUT 3.5mm jacks, and built-in MIC Connectivity Gigabit Ethernet Optional 8021.11b/g/n and Bluetooth4.0 via Ampak AP6212 module Optional 3G via ZTE MF210 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on $20 MediaTek LinkIt 7687 Arduino Compatible WiFi IoT Board Runs FreeRTOS

$20 MediaTek LinkIt 7687 Arduino Compatible WiFi IoT Board Runs FreeRTOS

MediaTek Labs has already launched several WiFi boards for IoT applications starting with LinkIt ONE, and later LinkIt Smart 7688 running OpenWrt, and the company is now about to launch LinkIt 7687 HDK (Hardware Development Kit) powered by Mediatek MT7687F Cortex-M4 SoC,  running FreeRTOS, and developed & produced by Silicon Application Corp (SAC). LinkIt 7687 (WS3489) board specifications: SoC – MediaTek MT7687F ARM Cortex-M4F MCU @ 192MHz with 352 KB SRAM, 64KB ROM, and 2 MB serial flash in package, integrated security engine, and built-in 802.11n WiFi. 8×8 mm 68-pin QFN package Connectivity – 1×1 802.11 b/g/n WiFi with on-module PCB antenna and U.FL connector. USB – 1x micro USB for power, debugging (Coresight Debug Access Port + Virtual COM) Expansion Arduino Uno Rev. 3 headers + an extra 8-pin extension connector. Mass Storage Device (MSD) flash programming interface. Reserved headers for power consumption (current) measurement. Misc – LEDs for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 28 Comments on NEXBOX A5 Android 6.0 TV Box Powered by Amlogic S905X Processor Supports HDR & 4K VP9 Videos

NEXBOX A5 Android 6.0 TV Box Powered by Amlogic S905X Processor Supports HDR & 4K VP9 Videos

Amlogic S905X is a low cost version of Amlogic S905 with a lower operating frequency, built-in stereo DAC, integrated Ethernet PHY, 4K VP9 and HDR10 & HLG support, and NEXBOX A5 TV box will be one of the first devices with the processor. NEXBOX A5 (preliminary) specifications: SoC –  Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (Option: 1GB) Storage – 16GB flash (8GB option) + micro SD card slot Video Output – HDMI 2.0a up to 4K @ 60 Hz, and AV port (composite) Audio Output – HDMI, optical S/PDIF, AV port (stereo audio) Video Codecs – 4K VP9 @ 60 fps, 4K 10-bit H.265 @ 60 fps Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – Power button and LED. Power Supply –  5V/2A Dimensions […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Ubuntu 16.04 LTS “Xenial Xerus” Release

Ubuntu 16.04 LTS “Xenial Xerus” Release

Ubuntu 16.04 Long Term Support (LTS) release of the popular Linux distribution is scheduled for later today. The release codenamed Xenial Xerus will feature ‘snap’ package format, LXD pure-container hypervisor, and be the very first release with support for converge with IoT, phone, desktop and server versions running on the same base. Some of the key changes listed by Canonical include: Introduces “snaps” for new robust, secure app format which can still be used along ‘deb’ packages Introduces LXD pure-container hypervisor with OpenStack Mitaka Supports IBM Z and LinuxONE systems with flat pricing Steps towards converged Ubuntu across IoT, Phone, Desktop and Server Introduces ZFS and CephFS for large-scale cloud storage Ubuntu 16.04 will also run updated version of packages with Linux 4.4, Python 3.5, OpenSSH 2.0, PHP 7.0, MySQL 5.7, etc.. More details about the changes can be found on Xenial Xerus release notes. I’ve also noticed the system […]

Rockchip RK3568/RK3588 and Intel x86 SBCs
Posted on by Karl Johnson - 5 Comments on Matricom G-Box Q2 Android TV Box Review

Matricom G-Box Q2 Android TV Box Review

Another guest review from Karl, this time, with Matricom G-Box Q2 Android 5.1 TV box based on Amlogic S812 processor. First Impressions Today I will be reviewing the G-Box Q2 by Matricom. This is a follow up device to the popular G-Box Q. The first day I plugged it in and did some basic first impressions I thought it was laggy…..but after using it and setting up the way I am accustomed to using it…I found it very fast and responsive. From the time power is applied to launcher is loaded is about 33 seconds. The software seems solid and I ran into only minor issues. It got very respectable scores between 38000 and 42000 on Antutu. The box does have a lot of software that I am not a fan of, but these can be easily uninstalled. The launcher that comes with it is ok but I prefer a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 63 Comments on Xiaomi Mi WiFi 3 Router Unboxing, Teardown, and Serial Console

Xiaomi Mi WiFi 3 Router Unboxing, Teardown, and Serial Console

Mi WiFi 3 is the new low cost 802.11ac WiFi router by Xiaomi that sells for about $40. GearBest send my one sample for evaluation, and today, I’ve taken some photo of the device and board, and connected the UART pin to see if the serial console was accessible for people who want to try to port OpenWrt for example. Xiaomi Mi WiFi 3 Unboxing There’s some information on the package, but everything is in Chinese, except the part about AC1200 meaning it supports up to 867 Mbps with 802.11ac and 300 Mbps using 802.11n. The router comes with a 12V/1A power supply, and a user’s manual in Chinese only. There’s also a QR code inside the box linking to the Android and iOS apps,  available both in English and Chinese, so actually that one of the few Xiaomi product that should be easy to use outside of China without […]

Boardcon Rockchip and Allwinner SoM and SBC products