zidoo News - Page 5 of 9 - CNX Software

October 14, 2016October 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Zidoo X9S Android Media Center Review – Part 2: Android Firmware & OpenWrt (NAS Functions)

Zidoo X9S is more than a simple Android TV box, as it supports NAS function via OpenWrt running simultaneously with Android 6.0 and its USB 3.0 and SATA ports, as well as HDMI input function capable of recording and broadcasting videos, and supporting Picture-in-picture, so I find “Android Media Center” better fit the description for this device. I’ve already taken pictures of the Zidoo X9S and its board in the first part of the review, so I’ll test both Android 6.0 & OpenWrt firmware, and the most of the features in the second part of the review. Initial Setup and First Boot I connected the usual accessories and cables to the box including a USB 3.0 hard drive, HDMI and Ethernet cables, USB RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, and a USB keyboard to take screenshots. I also added a 1TB SATA […]

October 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Zidoo X9S Android TV Box HDMI Input Testing – Video Recording, PiP, and UDP Broadcasting

One of Zidoo X9S media center‘s key features is its HDMI Input port with support for PVR, picture-in-picture, and video broadcasting over UDP. The company has come a long way since the implementation of HDMI input on Zidoo X9 TV box, which would only support PVR function, and exclusively work in the foreground. For this review, I connected K1 Plus T2 S2 Android TV box to the HDMI input of Zidoo X9S, and started HDMI In app.The first good news is that HDMI input does work, as we can see K1 Plus user interface preview inside Zidoo X9S’ HDMI IN app. Before testing all features, let’s go through the options for Video, Audio, and Output. You can select various video resolution up to 1080p, but I left it to Auto, which for this test meant 1080p. Framerate cannot be changed and is set to Auto, while bitrate ranges from 1M […]

September 21, 2016October 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

4K Video Playback and HDMI Audio Passthrough in Realtek RTD1295 based Zidoo X9S TV Box

Zidoo X9S is a high-end 4K TV box and HDMI recorder based on Realtek RTD1295 processor. I’ve already checked its hardware, and run some benchmarks, so after a successful OTA firmware update, I decided to test 4K videos and HDMI audio pass-through capabilities of the device with ZDMC, Zidoo’s fork of Kodi 16.1, and “Media Center” internal player. Before starting playing 4K videos and testing HDMI audio pass-through, you’ll want to make sure to configure video output to a 4K UHD resolution and framerate such as 3840×2160 @ 60 Hz, as well as change HDMI output audio in Sound & notification settings. The options are a little different from the other boxes as beside RAW and 2-channel LPCM, Zidoo X9S also supports multi-channel LPCM. In order to test HDMI audio pass-through, it must be set to RAW. You may also want to check Playback options to switch to 24 Hz […]

September 9, 2016September 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Zidoo X9S Realtek RTD1295 Android & OpenWrt TV Box System Info & Benchmarks

Zidoo X9S is the first Android TV box based on Realtek RTD1295 quad core Cortex A53 processor that I’ve received for review. So in this post, I’ll show some system information with CPU-Z, and Android & OpenWrt Settings, and run typical Android benchmarks such as Antutu 6.x, Vellamo, and 3Dmark. Zidoo X9S / Realtek RTD1295 Android System Info CPU-Z detects Realtek RTD1295 is a quad core ARM Cortex A53 processor clocked between 600 MHz and 1.4 GHz with an ARM Mali-T820 GPU, and uses an unknown governor… But in adb shell, tje command “cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor” reports an ondemand governor is used. The system runs Android 6.0.1 on top of Linux 4.1.17 (I think it’s the first time I see a Linux 4.x kernel used in a TV box…), and with 1920×1080 resolution. Total RAM is shown to be 1672 MB, most probably because some RAM is reserved for the GPU […]

September 7, 2016October 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Zidoo X9S (Realtek RTD1295) Android TV Box Review – Part 1: Unboxing and Teardown

Zidoo X9S is one of the first Realtek RTD1295 based TV boxes coming to market, and it has some pretty special features like running both Android 6.0 and OpenWrt simultaneously, HDMI input support for video recording and PiP, an external SATA interface, 4K media capabilities including HDMI 2.0a output, 4K 60 fps H.265 and VP9 & 4K 24 Hz H.264 video decoding, as well as HDR and 3D support. You can find the full Zidoo X9S specification in my previous post. The company has now sent me an early review sample, and in the first part of the review you’ll post photos of the devices and accessories, and perform a teardown to find out more about the electronics and thermal design. Later on I’ll publish articles with benchmarks, video performance, and the complete review. Zidoo X9S Unboxing The box comes in a light green retail package showing some of the […]

August 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zidoo X9S Android TV Box, OpenWrt NAS, and HDMI Recorder is Now Up for Pre-order for $149

Zidoo X9 was one the first Android TV boxes with HDMI input that supported video recording and PiP, and back in April, the company unveiled a new and more powerful model called Zidoo X9S with many of the same features, but based on Realtek RTD1295 64-bit processor, and with NAS features. GeekBuying has just informed me that they had started to take pre-orders for Zidoo X9S for $149 with shipping scheduled to start on August 31st. Zidoo X9S specifications have slightly changed since the announcement, and the case has been redesigned: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC + SATA 3.0 external interface + micro SD card slot up to 32GB Video I/O HDMI 2.0a output up to 4K@60Hz; supports 23.976 and 29.94 Hz outputs HDMI 2.0 input for recording, UDP streaming, and picture-in-picture […]

April 25, 2016December 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

What’s the Best Android TV Box?

[Update December 26, 2017: I’ve posted a new version of this post entitled “What’s the Best Android TV Box (2017/2018 Edition)?“. I’ll leave the post below to have an historical perspective] I often get asked which TV box to buy, or what the best Android TV box is, and the answer is the TV box that fits your needs for the lowest price point possible. Considering there are around 2 millions apps for Android, they are multitudes of use cases, and you can’t provide a single answer for everybody. So I’ll provide a list of things to look for beside the processor, and three TV boxes that I think are worth considering, before providing alternatives for people who want cheaper devices. Things to Look for There are still a few things you may want to specifically look for before purchasing an Android TV box: History of regular firmware updates – […]

April 11, 2016April 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Zidoo X1 II 4K Android TV Box (Rockchip RK3229) Review

After skipping MXQ-4K TV box review due to severe issues with video playback, Zidoo X1 II is actually the first device powered by Rockchip RK3229 processor that I’ve fully tested. I’ve already taken pictures of the box, and opened it up to check the board in Zidoo X1 II unboxing and teardown post, and confirmed 4K videos could play pretty well from my USB hard drive using Zidoo Media Center after disabling Media Scanner process. So today, I’ll review other parts of the firmware, as well as video playback with ZDMC 16.0, Zidoo’s fork of Kodi 16.0. First Boot, Settings and First Impressions The device only has two USB ports, and I used one for a USB hard drive, and the other for RF dongles for MINIX NEO A2 Lite air mouse, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad via a USB hub. I also […]