z-wave News - Page 2 of 4 - CNX Software

August 22, 2022August 22, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Wireless M-Bus & LTE Cat 1 sensor board also supports Zigbee 3.0, Z-Wave, Bluetooth LE 5.0, LoRa…

Geniatech SCB32IM is a sensor board based on Silicon Labs EFR32FG14 Arm Cortex-M4 microcontroller with a sub-GHz radio enabling wireless M-Bus (Wireless Meter Bus) designed for remote reading of smart meters, and also equipped with a Quectel EC200S “IoT/M2M-optimized” LTE Cat 1 module. The sensor module does not actually come with any sensor on board, but provides a terminal block to connect any sensor you may need for your product. It’s also possible to extend wireless connectivity options with Zigbee 3.0, Z-Wave, Bluetooth LE 5.0, LoRa, and more through the GT-IoT interface with UART, SPI, and one GPIO. Geniatech SBC32IM specifications: Microcontroller – Silicon Labs EFR32FG14 Aem Cortex-M4 MCU @ 40MHz with up to 256 KB flash, 32 KB RAM, and proprietary 2.4GHz and sub-GHz radios Wireless connectivity Wireless M-Bus S Mode: 868 MHz band T Mode: 868 MHz band C Mode: 868 MHz band N Mode: 169 MHz band […]

September 20, 2021November 24, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arm PSA Certified Level 3 Sub-GHz wireless SoCs support Amazon Sidewalk, mioty, Wireless M-Bus, Z-Wave…

Silicon Labs has announced two new sub-GHz wireless SoCs with EFR32FG23 (FG23) and EFR32ZG23 (ZG23) devices adding to the company’s Gecko Series 2 Cortex-M33 platform. Both FG23 and ZG23 support up to one mile (~1.6 km) wireless range, 10+ year battery life on a coin-cell battery, are certified with Arm PSA Level 3 security, and support “advanced wireless technologies” such as Amazon Sidewalk, mioty, Wireless M-Bus (WM-Bus), Z-Wave, and proprietary IoT networks. Silicon Labs explains the chips’ ultra-low transmit and receive radio power (13.2 mA TX at 10 dBm, 4.2 mA RX at 920 MHz) and RF implementation (+20 dBm output power and -125.3 dBm RX at 868 MHz, 2.4 kbps GFSK), makes the long-range and long battery life possible. The ZG23 is designed for Z-Wave applications with Long Range and Mesh connectivity and can be integrated into either end devices or gateways. The company is also working on ZG23-based […]

July 27, 2021July 27, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Industrial Android/Linux mini PC ships with optional HDMI input, DTV tuner, 4G LTE modem

Industrial Android mini PC with HDMI input, ATSC, 4G modem

We’re seeing several companies known for their Android TV boxes switch to higher-margin industrial Android/Linux mini PCs with, for instance, Zidoo M6 mini PC powered by Rockchip RK3566 processor and designed for IoT applications, digital signage, and more. Geniatech APC820 is another industrial mini PC running either Android or Linux, on the older, yet more powerful Rockchip RK3399 SoC, and offering a different set of options including 4K or Full HD HDMI input, digital TV tuner, and/or a 4G LTE modem. Geniatech APC820 specifications: SoC – Rockchip RK3399 hexa-core processor with 2x Cortex-A72 cores up to 1.8GHz, 4x Cortex-A53 up to 1.4GHz, Mali-T860 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenCL, and DirectX 11.1 System Memory – 2GB or 4GB RAM Storage – 16GB eMMC flash by default (Option for 8GB to 128GB), MicroSD card slot Video Output HDMI 2.0 up to 4Kp60 Internal LVDS connector with backlight Internal eDP connector […]

May 6, 2021May 11, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Z-Pi 7 Z-Wave gateway devkit works with Raspberry Pi and Orange Pi Zero boards

WiFi & Bluetooth are the most popular wireless protocols for home automation, alternatives like Zigbee and Z-wave have also been widely adopted, at least in some countries. And if you are interested in the latter, Aeotec has just introduced the Z-Pi 7 gateway development kit that lets you add Z-Wave connectivity to Raspberry Pi boards or Orange Pi Zero SBC with an expansion board connected over UART through the GPIO header. Aeotec Z-Pi 7 Z-Wave expansion board (ZWA025) specifications: Z-Wave connectivity Silicon Labs EFR32ZG14 Arm Cortex-M4 SoC @ 39 MHz with Series 700 and Gen7 technology Frequencies ZWA025-A: US Frequency 908.42 Mhz ZWA025-B: AU Frequency 921.42 Mhz ZWA025-C: EU frequency 868.42 Mhz TX Power – US: +9.3 dBm; EU: +4.8 dBm RX sensitivity – -97.5 dBm Range Indoor – US: 70+ meters; EU: up to 60 meters Outdoor – Up to 200 meters SmartStart native integration and S2 security. Z-Wave Plus Certified […]

September 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Z-Wave Long Range (LR) Promises Up to 4 Times the Range, 10-year Battery Life

The new Z-Wave Alliance Technical and Certifications workgroup, part of the Z-Wave Alliance, has announced the new Z-Wave Long Range (Z-Wave LR) specifications offering up to four times the range, support for ten times larger network, and 10-year coin cell battery life while keeping backward compatibility and interoperability Z-Wave LR will support up to 2000 nodes on a single smart home network making it suitable for indoor and outdoor smart home applications in multi-dwelling units, hotels, and hospitals, and removing the need for repeaters. The Z-Wave LR specification will be managed and certified under the Z-Wave Plus V2 certification program that currently mandates the inclusion of the enhanced S2 security framework as well as SmartStart plug-and-play setup feature for the consumer smart home. More details may be found on the press release and some of the sessions that were presented at Works With by Silicon Labs Virtual Conference on September […]

August 7, 2020August 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

BaHa Box Smart Automation Hub Features Allwinner H2+ or NXP i.MX 6ULL Processor (Crowdfunding)

Most devices on the market are designed with a single brand of processor, but for their BaHa Box smart automation hub, xPoint Products decided to offer either Allwinner H2+ or NXP i.MX 6ULL versions. Why is that? Easy: Allwinner H2+ processor provides a cheaper solution for the residential market, while NXP i.MX 6ULL wide temperature range makes it more suitable for commercial applications. Both versions of BaHa Box smart hub run Linux on 256MB RAM, and offers Ethernet, WiFi, and Bluetooth connectivity, with options for Zigbee and Z-Wave. The hub supports over 2,000 devices and can work either connected to the cloud, or “offline” without internet. BaHa Box specifications: SoC Residential-grade version – Allwinner H2+ quad-core Cortex-A7 processor Commerical-grade version – NXP i.MX 6ULL Cortex-A7 processor System Memory – 256MB DDR3 Storage MicroSD card slot Residential-grade version – 256KB flash Industrial-grade version – 256MB flash Connectivity 10/100M Ethernet, WiFi, and […]

December 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Z-Wave Open Standard to Enable Third-Party Z-Wave Silicon and Stack Suppliers

Roughly one year ago, Silicon Labs released a publicly available Z-Wave SDK and a Raspberry Pi 3 Image to make it easier to work with the wireless protocol targetting home automation. But Z-Wave specifications were still closed, which meant Z-Wave chips could only be purchased from Silicon Labs, a bit like LoRa chip can only be purchased from Semtech. The advantage of being closed is that you’re the only supplier, but this will limit market adoption, and customers may be wary of relying on a single partner for their long term plans. That must be why The Z-Wave Alliance and Silicon Labs have now decided to open Z-Wave specifications to Silicon and Stack suppliers. That paves the way to third-party software platforms and Z-Wave radios from some of the 700+ companies which are members of the Z-Wave Alliance. The Z-Wave specification release is scheduled for H2 2020, and will include […]

June 25, 2019June 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Vosen V1 S905X2 Android TV Box Doubles as a Home Gateway with IR Blaster and Z-Wave Support

At first look, Vosen V1 appears to be like any other 4K HDR Android TV box powered by Amlogic S905X2 quad-core Cortex-A53 processor, but it offers a bit more thanks to a built-in IR blaster allowing you to control other appliances in the room such as air conditioner, television, or A/V receiver. The box can be further enhanced by plugging-in a Z-Wave USB adapter to control & monitor even more compatible devices around the house such as light bulbs or water-leak sensors. Vosen V1 specifications: SoC – Amlogic S905X2 quad core Arm Cortex-A53 with Mali-G31 MP2 GPU System Memory – 2GB LPDDR4 RAM Storage – 16GB eMMC flash, microSD card slot up to 32GB Video & Audio Output – HDMI 2.1 output up to 4K @ 75 Hz with HDR, 3.5mm AV port (composite + stereo audio) Video Codecs – VP9 Profile-2 up to 4K 60fps, 10-bit H.265/HEVC up to […]