AMD Ryzen Embedded SBC Review with Ubuntu 20.04

AMD Ryzen Embedded Ubuntu 20.04

Last June, we reviewed DFI GHF51 Ryzen Embedded R1606G SBC with Windows 10 Enterprise LTSC. We had to send back the board to Taiwan, as the company wanted to double-check some of the issues we reported, and we got the board to review it with Ubuntu 20.04. So I downloaded Ubuntu 20.04.1 ISO flashed it to a USB flash drive, and could install it on the eMMC flash drive without issue. I selected to keep Windows 10, so I have a dual-boot system on a 32GB eMMC flash. Yes, I do like a challenge! 🙂 DFI GHF51 Ubuntu 20.04 System Info We can check some of the information from the system in the terminal:

So I have a 7.9GB partition to play with Ubuntu 20.04.1, but I could do all tests without issues, although I had to remove Phoronix benchmark program and data after completing the benchmark. Features Testing […]

Beelink GT-R Review – An AMD Ryzen 5 Mini PC Tested with Windows 10 and Ubuntu 20.04

Beelink GT-R Review

Whilst Windows mini PCs have traditionally used Intel processors similar small form factor (SFF) devices using AMD based processors have recently been announced and Beelink is amongst the first manufacturers to deliver one with their newly released GT-R mini PC. Available as a barebones device and in various configurations Beelink sent a fully configured model for review. Hardware overview The Beelink GT-R is a slightly larger mini PC physically consisting of a 168 mm x 120 mm x 39 mm (6.61 x 4.72 x 1.54 inches) rectangular metal case with a plastic top. It is an actively cooled mini PC that uses a (previous generation) Zen+ microarchitecture 12 nm Ryzen 5 3550H mobile processor which is a quad-core 8-thread 2.1 GHz processor boosting to 3.7 GHz with Radeon Vega 8 Graphics. The front panel has a power button, two 3.0 USB ports, a headphone jack, and a Type-C USB port […]

Checking Out Raspberry Pi OS 64-Bit on Raspberry Pi 4 8GB RAM

Raspberry Pi OS 64-bit on Raspberry Pi 4 8GB

The Raspberry Pi 4 with 8GB RAM launched a couple of weeks ago together with the beta version of Raspberry Pi OS 64-bit. Note that you should currently use the 32-bit version of Raspberry Pi OS (previously known as Raspbian) as the 64-bit still has bugs and missing features, but I want to find out the current progress, so I installed raspios_arm64-2020-05-28/2020-05-27-raspios-buster-arm64.zip and had no problem to boot the board. Raspberry Pi OS 64-bit System Information After going through the setup wizard in the desktop environment to configure the language, time, networking, etc…, and make sure the OS is updated, I checkout some information:

I do have a Raspberry Pi 4 Model B Rev 1.4 with 8GB Memory (revision: d03114), the image comes with a 64-bit Linux kernel:

and we do get a 64-bit rootfs.

All good. Known issues Before starting the review, let’s make ourselves aware […]

DFI Ryzen Embedded R1606G SBC Review – Part 2: Windows 10 Enterprise LTSC

DFI Ryzen Embedded Review

DFI GHF51 is an AMD Ryzen Embedded R1606G SBC for industrial application that’s about the size of the Raspberry Pi Model B board, and after checking out the hardware in the first of part of the review “DFI GHF51 AMD Ryzen Embedded SBC Review – Part 1: Unboxing and Assembly“, I’ve now had time to play with the board running the pre-installed Windows 10 Enterprise LTSC operating system. DFI GHF51 Hardware Connections Since there aren’t any full-sized USB ports, you’ll need a USB-C hub to get started as you’ll probably want to connect a USB keyboard and mouse for development and testing, as well as a Micro HDMI cable to connect to a TV or display. I tried both MINIX NEO C Plus and Dodocool DC30S USB Type-C hubs, and the former did not work at all, while the latter mostly worked. I also connected an HDMI cable to the […]

Beelink Gemini T45 Pentium N4200 Mini PC Review

Beelink T45-Pentium N4200 Mini PC Review

No sooner had I written ‘Beelink T45 Review with Windows and Linux, and Tweaking BIOS Power Limits’ than Beelink announce they wouldn’t in fact sell that configuration but an ‘updated’ version. And it is significantly different because this new version is now actively cooled and uses an Apollo Lake N4200 processor. It also still has the same name: the Beelink Gemini T45. I’ve now reviewed this new version and you may experience déjà vu on reading the following as in keeping with Beelink’s philosophy I’ve basically reused the same text as before and just updated where appropriate. Beelink have further extended their ‘Gemini’ range of mini PCs by adding the T45. This is an actively cooled mini PC that uses the slightly older Apollo Lake Intel Pentium N4200 CPU which is a quad-core 4-thread 1.10 GHz processor boosting to 2.50 GHz with Intel’s HD Graphics 505. The T45 is a […]

Beelink T45 Review with Windows and Linux, and Tweaking BIOS Power Limits

beelink t45 temperature

[Update December 23, 2019: We’ve been informed by Beelink that the T45 has been updated to the 6W Celeron N4200 processor instead, and the system is now cooled with a fan. The model reviewed in this post is the fanless version with a 10W Intel J4250 processor, which was never sold] [Update January 30, 2020: We’ve now posted a review of the new model at Beelink Gemini T45 Pentium N4200 Mini PC Review] Beelink have further extended their ‘Gemini’ range of mini PCs by adding the T45. This is a passively cooled mini PC that is effectively a companion to the J45 as it again uses the slightly older Apollo Lake Intel Pentium J4205 CPU which is a quad-core 4-thread 1.50 GHz processor boosting to 2.60 GHz with Intel’s HD Graphics 505. Although the T45 is a ‘NUC’ style mini PC physically consisting of a 119 x 119 x 17.7 […]

MINIX NEO G41V-4 Mini PC Review – Part 2: Windows 10 Pro

MINIX NEO G41V-4 HDMI + VGA

MINIX NEO G41V-4 is the latest mini PC from the Hong Kong-based company, and this time they’ve gone fanless with a new design that should allow proper cooling with a large heatsink, plenty of ventilation holes on the top, as well as a dust-resistant meshing to present dust from entering inside the enclosure. I’ve now had time to review the fanless mini PC, and I’ll report my experience with Windows 10 Pro, while Ian did his part with Ubuntu 18.04. Switching to Windows 10 Boot from SSD I had installed the optional 240GB SSD in the first part of the review. It offers an easy way to get more storage and performance, and you don’t need to reinstall Windows 10 Pro since it’s already installed in the SSD. You just need to change some settings in the BIOS as explained in the user manual. To be on the safe side, […]

Rikomagic R6 Mini Projector Review – Part 2: Android 7.1

Rikomagic R6 Android Projector Review

We’ve already quickly checked out Rikomagic R6 mini projector in the first part of the review with an unboxing and first boot,  but now I’ve had more time to play with the device, so I’ll report about my experience. Android Launcher and Default Apps Here’s the launcher pre-installed in the projector. Media Center The Media Center app allows you to display images, play audio files as well as videos. It will show thumbnails of images present in the current folder… and as soon as you select one image in the folder it will start a slideshow with classic music playing the background. You’ll be able to see what it looks like in the video at the end of this review. Happy Cast It’s an app in Chinese, that apparently allows you to cast from other Chinese apps, but I have not used it. WiFi Display WiFi Display will be one […]

Exit mobile version
UP 7000 x86 SBC