yocto News - Page 7 of 45 - CNX Software

November 15, 2023June 11, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Renesas RZ/G2UL Arm Cortex-A55/Cortex-M33 industrial system-on-module sells for as low as $17 in volume

MYiR Tech MYC-YG2UL is a tiny (39x37mm) system-on-module based on the Renesas RZ/G2UL SoC with a 1GHz Arm Cortex-A55 application core and 200MHz real-time Cortex-M33 cores designed for industrial HMIs and gateways, and the company has also launched the MYD-YG2UL development board with the module and interfaces such dual gigabit Ethernet, RS485, RS232, CAN Bus, and more. MYC-YG2UL Renesas RZ/G2UL CPU module Specifications: SoC – Renesas RZ/G2UL (Type-I) CPU – Arm Cortex-A55 processor at up to 1 GHz MCU – Arm Cortex-M33 clocked at up to 200 MHz GPU – 2D graphics (Image Scaling Unit) System Memory – 512MB DDR3L Storage – 4GB eMMC flash, 4KB EEPROM 1.0mm pitch 140-pin castellated holes and 50-pin LGA Display – RGB LCD interface Camera – MIPI CSI interface Networking – 2x RGMII (gigabit Ethernet) USB – 2x USB 2.0 Analog – 2x ADC Other I/Os – 5x SCIF, 2x SCI, 2x CAN FD, 4x […]

November 15, 2023November 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Giveaway Week 2023 winners announced!

CNX Software’s Giveaway Week 2023 is now over and we’re ready to announce the winners. We offered some of the review samples we tested (or not) in the last year, and like the last two years, we were also joined by RAKwireless who offered two IoT development kits. All items given away are shown in the photo below, minus some accessories, and if you count more than seven you’d be right, as some are kits with multiple items like the GL.iNet GL-S200 Thread Border router which comes with three development boards, and more importantly, we also organized Giveaway Week on CNX Software Thailand for the second year running. We had seven winners on CNX Software: VOIPAC iMX8M industrial development kit – Kraingsak, Thailand TBS7901 mini PCIe DVB-S2X/S2 module – Frank, Singapore RAKWireless WisBlock IoT Starter Kit – Andy, Russia GL.iNet GL-S200 Thread Border router kit – Augustin, Argentina WCH CH583M-R0-1v1 […]

November 12, 2023November 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 247 Comments

Giveaway Week 2023 – i-Pi SMARC 1200 devkit with Mediatek Genio 1200 Cortex-A78/A55 SoC

i-Pi SMARC 1200 Yocto Linux glmark2 benchmark

We’ll end this year’s Giveaway Week with a pretty powerful development kit – ADLINK i-Pi SMARC 1200 – powered by a MediaTek Genio 1200 octa-core processor with four Cortex-A78 cores @ up to 2.2 GHz, four Cortex-A55 cores, an Arm Mali Mali-G57 MC5 GPU, 4K hardware video decoding and decoding support, and a 4.8 TOPS NPU. The mainboard is comprised of a SMARC 2.1-compliant system-on-module with 4GB LPDDR4 memory and 64GB UFS storage and fitted with a heatsink for cooling as well as a carrier board with a 4Kp60 capable HDMI 2.0 port, two Gigabit Ethernet ports, two USB 3.0 ports, two USB 2.0 ports, a 3.5mm audio jack, two 40-pin headers for I/Os including one compatible with the 40-pin Raspberry Pi GPIO header, plus LVDS connectors, MIPI CSI camera connectors, and M.2 expansion slots for storage and/or wireless expansion. I tested the MediaTek Genio 1200 devkit with a Yocto […]

November 6, 2023November 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 135 Comments

Giveaway Week 2023 – VOIPAC iMX8M industrial development kit

VOIPAC IMX8M Industrial Development Kit Review

The 10th edition of CNX Software giveaway week is on! We’ll have seven items to give away this time around: six items that I will send myself from my review samples and one from a company that will offer one of its own IoT development kits… We’ll start this year’s giveaway week with the VOIPAC iMX8M industrial development kit equipped with an “iMX8M Industrial Pro” system-on-module powered by an NXP i.MX 8M quad-core Cortex-A53 processor, fitted with 2GB RAM, 16GB eMMC flash, and a WiFi and Bluetooth module. The VOIPAC iMX8M industrial development kit is quite a feature-rich development board whose main purpose is to evaluate the company’s system-on-module for integration into final products. I tested it last summer showing how to get started with the Yocto BSP by building the image from scratch, booting from the eMMC flash or a microSD card, and testing several features such as networking, […]

November 2, 2023November 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Rockchip roadmap reveals RK3576 and RK3506 IoT processors, Linux 6.1 SDK

The Rockchip RK3588 processor may remain the most powerful processor from the company for a while as an updated Rockchip IoT processor roadmap reveals the new RK3576 octa-core SoC and RK3506 tri-core Cortex-A7 chip, as well as a Linux 6.1 SDK to be released in Q4 2023. With the limited information we have, the Rockchip RK3576 looks to be a cost-down version of the RK3588 processor with eight cores, a 6 TOPS NPU, a 4K video codec, as well as PCIe and USB-C interfaces. Strangely the Rockchip RK3582 that should serve a similar purpose is not showing up in the roadmap. [Update: The RK3576 is indeed a lower-cost SoC but features four Cortex-A72 and four Cortex-A53 cores instead as per the comparison table reproduced below: That also means we now have the RK3576 specifications (some obtained from another document too): CPU Octa-core Arm processor with 4x Cortex-A72 cores at 2.2 […]

October 26, 2023October 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Portenta Hat Carrier board adds Raspberry Pi HAT support to the Portenta X8 SBC

The Arduino Portenta Hat Carrier board aims to interface the Linux-capable Portenta X8 board with the vast ecosystem of Raspberry Pi HAT (Hardware on Top) expansion boards. Introduced last year, the Arduino Portenta X8 is the first Arduino Pro hardware that can run Linux thanks to its NXP i.MX 8M Mini Arm Cortex-A53 quad-core processor. But it comes in a tiny 66.04 x 25.4 mm form factor which may be great for integration into products, but for prototyping or design of products such as IoT gateways, the company has now launched the Portenta Hat Carrier that enables the board to easily connect with the Raspberry Pi HATs available today. Portenta Hat Carrier specifications: Compatible with the Portenta X8 board and future Portenta with the same high-density connectors Storage – MicroSD card slot Camera I/F – MIPI CSI camera connector (CNXSoft: Arduino does not explicitly say whether it’s compatible with the […]

October 19, 2023October 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Generative AI on NVIDIA Jetson Orin, Jetpack 6 SDK to support multiple OSes

NVIDIA has had several announcements at ROSCon 2023 related to robotics & embedded with highlights including generative AI on the NVIDIA Jetson Orin module and the Jetpack 6 SDK will be released next month (November 2023) with supports for Ubuntu as usual, but also other operating systems and platforms such as Debian, Yocto, Wind River, Redhawk RTOS, and Balena. Generative AI on NVIDIA Jetson Orin There’s been a lot of hype in the last year about generative AI thanks to services such as ChatGPT, Google Bard, or Microsoft Bing Chat. But those rely on closed-source software that runs on powerful servers in the cloud. As we noted in our article about the “AI in a box” offline LLM solution there are some open-source projects such as Whisper speech-to-text model and Llama2 language models that could be run on embedded hardware at the edge, but as noted by some readers platforms […]

October 10, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

SECO Modular Vision HMI displays support Arm and x86 SMARC 2.1 modules

SECO has unveiled a new HMI family of smart displays called the “Modular Vision” with NXP i.MX 93 (Arm), NXP i.MX 8M (Arm), or Intel Elkhart Lake (x86) powered SMARC 2.1-compliant system-on-modules and a display size ranging from 7-inch up to 15.6-inch. The goal is to offer a flexible platform to customers who can select various display sizes (7-inch, 10.1-inch, or 15.6-inch currently) and a SMARC module that closely matches the product’s requirements for example for a standalone panel PC. SECO Modular Vision key features and specifications: SoC 7-inch model – NXP i.MX93 single or dual-core Arm Cortex-A55 @ 1.7 GHz, Arm Cortex-M33 @ 250MHz, Arm Ethos U-65 microNPU 10.1-inch model – NXP i.MX 8M Plus dual or quad-core Arm Cortex-A53 @ 1.8 GHz, Arm Cortex-M7 @ 800MHz, optional GPU/VPU/2.3 TOPS NPU 15.6-inch model – Intel Atom x6000E, Pentium, and Celeron N and J Series “Elkhart Lake” CPUs with Intel […]