xbmc News - Page 7 of 18 - CNX Software

August 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

XBMC is Dead, Long Live Kodi Entertainment Center!

Don’t worry, the XBMC project that many people use and love is not really dead, but it won’t be called XBMC anymore. Developers have chosen to go with “Kodi Entertainment Center”, starting with version 14, which will be called Kodi 14, and not XBMC 14. Nothing else changes from the user’s perspective, and the code will still be licenses under GPL 2.0, but the name Kodi is now trademarked, and it may affect how websites and hardware vendors use Kodi name and logo. There are several reasons behind the name change, the fourth for the project. Initially it was called Xbox Media Player, then changed to Xbox Media Center as it could do more than just a media player, and finally the name was shortened to XBMC because it could run on various hardware, and not only Xbox. Forward to 2014, XBMC is barely supported on Xbox, and does not […]

July 30, 2014July 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

$50 CMX Dual Core Android TV Box Runs Android 4.2, Supports XBMC Linux

XBMC Android now runs fairly well on ARM based hardware, but some people still prefer to run XBMC Linux because they want a pure XBMC experience, and Android is just an unnecessary overhead, and some features are still better supported in XBMC Linux such as frame rate switching, which is not supported in Android (You need to manually select the refresh rate in the settings). One way to go if you want to get XBMC Linux is to buy one of the boxes pre-loaded with the firmware such as Jynxbox M1V2 Pure Linux or Little Black Box. But these devices are generally significantly more expensive than their Android equivalents. So instead, some people get an Android TV box, and install XBMC Linux firmware compatible with the hardware such as MX Linux which runs on media players with a “g18ref” and “mx2ref” boards. Gbox Midgnight MX2 is one of these g18ref […]

July 19, 2014July 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

XBMC Linux (Beta) for SZ Tomato / Eny M8 Available for Download

SZ Tomato / Eny (E)M8 is an Android TV box powered by Amlogic S802 quad core processor, with 2GB RAM and 16 GB flash, but Stane1983 has been working on an XBMC Linux port for the device, and has released a beta version on Freaktab a few days ago. The firmware file (MX_LINUX-K200-update.zip) is available, and just need to be copied to an SD card to perform the update. The version is Gotham 13.1. This will completely replace you Android installation, and only works on M8 TV box, as the bootloader is not compatible with other S802 hardware, and the firmware only support AP6330 Wi-Fi module. If you decide not to keep using XBMC Linux, you can revert to Android, but reflashing the firmware via the SD card. This is a beta version, so expects some bugs. The list of known bugs is as follows: Bootlogo and splashscreens (booting up/shutting […]

July 18, 2014September 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Amlogic S802 TV Boxes Are Getting Cheaper: Meet $72 MX3 (M82) TV Box

When Android media players based on Amlogic S802 first launched a little over 3 months ago, they all sold for over $100. Since then various products have come to market, with prices slowly edging lower. But none comes as cheap as MX3 (aka M82), whose name is probably inspired from Gbox Midnight MX2, as it sells for $72.22 on GearBest including shipping. [Update: It can be found for $70 on DealExtreme] Let’s go through the specifications: SoC – AMLogic S802 quad core ARM Cortex A9r4 at 2.0GHz with ARM Mali-450MP6 GPU System Memory – 1GB DDR3 Storage – 4 GB NAND Flash + micro SD card slot Video and Audio Output – HDMI and AV Connectivity – 10/100M Ethernet, Wi-Fi 802.11 b/g/n, USB – 2x USB 2.0 host ports + micro USB OTG Misc – IR Sensor, Power LED, power button, and recovery/update switch via AV jack Power Supply – […]

July 14, 2014August 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Eweat EW802 Android TV Box (Amlogic S802) Supports External SATA Drives, Features Dual Wi-Fi Antennas

Amlogic S802 does not support SATA natively, so few Android media players based on this quad core SoC comes with SATA hard drive or SSD support. Zoomtak T8 is one of them, but there’s now another options with Eweat EW802, except than having an internal bay for 2.5″ hard drives, it just features an external SATA connector capable of handling both 2.5″ and 3.5″ drives, and comes with better specs including dual Wi-Fi antennas, 2GB RAM, and 16GB flash. Eweat EW802 specifications: SoC – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU (N.B: It could also be S802-H due to Dolby abd DTS hardware decoding claim). System Memory – 2GB DDR3 Storage – 16GB NAND flash + micro SD slot + SATA connector Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi with two external antennas, and Bluetooth 4.0 Video Output – HDMI 1.4a and AV […]

July 2, 2014July 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

SolidRun HummingBoard Raspberry Pi-Like Board is Now Available for $45 and Up

HummingBoard is a board made by SolidRun that’s mechanically compatible with the Raspberry Pi, and offering the same expansions connectors, and a few extras. The board is comprised of a baseboard and a microSoM powered by Freescale i.MX6 Solo, Dual Lite or Dual. At first it looked like an internal project, but the board went viral together with the Banana Pi, and the company has now announced availability for the HummingBoard with pricing starting at $45 for the single core version up to $100 for the dual core version with extra options. There are currently three models: HummingBoard-i1 ($44.90) – Freescale i.MX6 Solo with GC880 GPU, 512 MB RAM, 10/100M Ethernet HummingBoard-i2 ($74.99) – Freescale i.MX6 Dual Lite with GC880 GPU, 1GB RAM, 10/100M Ethernet HummingBoard-i2ex ($99.99) – Freescale i.MX6 Dual with GC2000 GPU, 1GB RAM, Gigabit Ethernet, LVDS output, mSATA II interface, PCI Express Gen 2 slot, RTC with […]

June 26, 2014June 26, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Zoomtak T8 Android TV Box Powered by Amlogic S802 Features a 2.5″ SATA Bay, an Aluminum Enclosure

There are now several Android TV boxes powered by Amlogic S802 such as Tronsmart Vega S89, SZTomato/Eny M8, and Minix Neo X8, and Zoomtak T8 hardware specifications are quite similar to these three devices, except it happens to feature an internal 2.5″ SATA bay placed under the board, and the body is made of aluminum. Zoomtak T8 specifications: SoC – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash + SD/MMC/MS card reader + 2.5″ SATA bay Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with external antenna. Video Output – HDMI 1.4a, composite output, and component output Audio Output – HDMI, stereo RCA, and optical S/PDIF Video Container Formats – DAT, MPEG, MPE, MPG, TS/TP, VOB, ISO, AVI, MP4, MOV, 3GP, FLV, MKV, M2TS, MTS, M4V, WMV, ASF, RM/RMVB, etc… Audio Formats – MP2, MP3, WMA, WAV, […]

June 19, 2014June 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 95 Comments

Giveaway Week – Gbox Midnight MX2 Android Media Player

The fourth prize for this week is Matricom Gbox Midnight MX2, an Android TV box powered by Amlogic AML8726-MX dual core processor with 1GB RAM, 4GB flash, HDMI and AV output, optical S/PDIF, Wi-Fi and Ethernet, and 4 USB ports. The company had specifically worked on the XBMC port at the time, and I found it did a pretty good job. I tested the device in May of last, and I found the firmware to be very stable and responsive, and XBMC works as expected, supporting most video files without issues, except some MPEG-2 had aspect ratio issues,, RMVB files would make XBMC exit, and WebM 1080p could not be played smoothly due to software decode for this particular codec. It could decode all high-end audio codecs such as DTS and Dolby just fine. I did have problems with composite and component outputs but it must have been fixed now. […]