xbmc News - Page 3 of 18 - CNX Software

December 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mini Review of Jesurun T034 Android TV Stick Featuring a Gigabit Ethernet Port

The vast majority of Android TV sticks only provide Wi-Fi to connect to the Internet, but Jesurun T034 is one of the rare TV stick that also features an Ethernet interface, and a Gigabit one at that. I’ve already listed specifications and uploaded pictures of the device, so today it’s time for a review. I’ve reviewed so many Rockchip RK3288 devices in the past, so I won’t write my usual full review, but I will focus on network connectivity, internal storage performance, stability / temperature measurements, as I’ve found high temperature to be problematic in another RK3288 TV stick, and I’ll quickly show the launcher, test the remote with the extension cable, and run Antutu 5.3 benchmark. Jesurun T034 User Interface and Remote Control I’ve connected the IR extension cable, an Ethernet cable, the RF dongle for Mele F10 Deluxe to the USB port, and the RF dongle for Tronsmart […]

December 2, 2014December 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Review of Open Hour Chameleon Android Media Player

Open Hour Chameleon is yet another Rockchip RK3288 based Android TV box, but it comes with aluminum enclosure, and boots from SD card instead of internal storage like all other devices I’ve seen on the market so far. Cloud Media (previously Syabas) also have a long history of making Linux based media players based on Sigma Designs processor, and when I worked on IPTV products, we used their PopCorn Hour has comparison platforms. So we should probably expect some interesting customization and features from the company. I’ve already posted pictures of Chameleon box and its board, so today, I’ll focus on reporting my experience with Android 4.4, and later I may also try their Lubuntu image. First Boot, Settings and First Impressions Normally I quickly try the remote control, and get it out of the way. But this time, I’ve spent a little bit more time with the remote since […]

November 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Imp Computer is an Ubuntu 14.04 mini PC Based on ODROID-U3 Development Board (Crowdfunding)

Hardkernel ODROID-U3 is a development board powered by Samsung Exynos 4412 quad core Cortex A9 processor that’s both small and cost effective at $59, not including required storage and shipping. An Israeli start-up named Imp Computer has now launched a mini PC of the same name, based on ODROID-U3 board, and running Lintux Ubuntu 14.04 with Cinnamon based Imp Desktop environment, and various pre-installed software packages like Chrome and Firefox web browsers, Kodi/XBMC, etc.., and somehow Microsoft Office with Word, Excel, PowerPoint, and Outlook are also listed, which does not seem right on an ARM Linux machine, but they are apparently using Microsoft Office Online to achieve this feast. Imp computer specifications: SoC – Samsung Exynos 4412 Prime @ 1.7 Ghz with ARM Mali-400MP4 GPU @ 440MHz System Memory – 2GB @ 880MHz Storage – 8 or 16 GB internal storage (micro SD card) USB – 3x USB 2.0 Host […]

November 18, 2014December 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

MK808B Plus Android HDMI TV Stick Based on Amlogic S805 Sells for $36

You can get a cheap an decent H.265 capable Android TV box for less than $50 with MXQ S85, but MK808B Plus may be the cheapest H.265 capable player on the market, as the Amlogic S805 based Android TV stick sells for just $35.99 on Aliexpress including shipping (promotion valid for 6 days). [Update: Apparently the seller “changed his mind”, and nobody could actually buy for $35.99, so the best option is with GeekBuying for $39.99, also a promotion for the first 1,000 pieces or 10 days whichever comes first] [Update Dec 9, 2014: Promotion for $29.99 on Gearbest with MK808BCN coupon valid until January 9, 2015]. MK808B Plus specifications: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with quad core Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB NAND flash + micro SD slot up to 32GB Connectivity – 802.11 b/g/n Wi-Fi, […]

November 18, 2014December 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MINIX NEO X6 Media Hub Review

Last week-end, I took a few pictures of MINIX NEO X6 media hub, and had a look at the company’s firmware and forum support which indeed seems to be good. Today, I’ve completed the full review of MINIX NEO X6, and I will compare it to two of its lower priced competitors: MXQ S85 and EM6Q-MXQ. First Boot, Settings and First Impressions The IR remote control works fine, including continuous up ad down pressing, but I switched to using Mele F10 Deluxe air mouse for convenience. I’ve connected an Ethernet cable, an HDMI cable, a micro SD card, a USB hard drive, and a USB hub with two RF dongles for my air mouse and gamepad, a USB flash drive, and a UVC webcam. I’ve connected the power, pressed the power button on the side of the box, but nothing happened at first… You have to press the button one […]

November 9, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

Tronsmart Draco AW80 Octa core Android TV Box Review

Tronsmart Draco AW80 (click for full specs) is the first octa core Android TV box / mini PC thanks to Allwinner A80 processor. Draco AW80 Meta model comes with 2GB RAM / 16GB eMMC, and the upcoming Draco AW80 Telos will feature 4GB RAM and a 32GB eMMC. Geekbuying sent me the Meta version for review, and since I’ve already posted pictures of the device and board, today I’ll post my findings after testing the unit. First Boot, Settings and First Impressions I’ve inserted two AAA batteries in the provided remote control, and it works as expect, but as usual, I’ve used Mele F10 Deluxe air mouse to control the device during my testing, since it’s impossible to use most apps with an IR remote control, XBMC/Kodi being one exception. I’ve connected an HDMI cable, a USB 3.0 hard drive to the USB 3.0 OTG port of the TV box, […]

November 5, 2014March 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Review of Rippl-TV Android XBMC TV Box

Rippl-TV is an Android TV box based on an update revision of Eny Techology/Shenzhen Tomato M8 (square) TV Box with an Amlogic S802 quad core processor, but featuring a different firmware with an alledgedly customized Android 4.4 OS called utilOS, and a launcher based on XBMC also called Rippl-TV. I’ve already written an unboxing post, including pictures of the board, so today I’l focus on the full review, and compare the performance to the original M8, as well as a closer look at the new user interface. First Boot, Settings and First Impressions Rippl-TV comes with an IR remote, and as long as your stay in XBMC and play videos, it’s fine, but as this type of remote is usable with most Android apps, I used Mele F10 Deluxe air mouse instead to control the device. I’ve connected an Ethernet cable, an HDMI cable, a USB hard drive, and a […]

November 1, 2014November 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Unboxing of Rippl-TV XBMC Android Media Player

Half year ago, I reviewed Shenzhen Tomato M8 / TM8 Android TV Box. It was the first hardware I received based on Amlogic S802, and although I found overall performance and video playback in XBMC was very good, the firmware was not always stable, and Wi-Fi performance was poor. Shenzhen Tomato has now sent me another model based on Amlogic S802 called Rippl-TV (click for full specs), with an hardware very similar to M8 as we’ll see below, but a completely different firmware that relies on XBMC as the Android launcher. Rippl-TV Unboxing I received the TV Box by Fedex in the following package that reads “Rippl-TV a drop of perfection brings out the best in media…” The package lists the key features of the TV with 4K UHD video playback, XBMC Rippl-TV Edition, Android 4.4 OS (called UtilOS), dual band Wi-Fi, a quad core Cortex A9 CPU coupled with […]