windows News - Page 14 of 21 - CNX Software

March 3, 2015March 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Intel Provides Details for Atom x3, x5 and x7 Processors

Intel had already announced their plan to change Intel Atom branding to use x3/x5/x7 nomenclature in order to make it easier for consumers to navigate their product offerings, but the company has now provided much more details during their press conference at Mobile World Congress 2015. Intel Atom x3 (previously known as SoFIA) will be entry and ultra-low cost processor up with 3G or LTE connectivity found in products up to around $150, while Atom x5 and x7 (previously known as Cherry Trail) will be found in tablets between about $200 to $400, with the top performing devices going with Intel Core M processors. Intel Atom x3 are very interesting because they mix Intel 64-bit cores with ARM GPUs (to keep the cost down), and parts with RK suffix are made by Rockchip. Three x3 processors are currently available: Intel Atom x3-C3130 – Dual-core processor up to 1.0 GHz with […]

February 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Vidonn X6 Activity Tracker Promises Up to 15 days Battery Life

I reviewed Vidonn X5 fitness tracker last yet, and I found many issues or letdowns: battery life is too short (2 days), the digits are much smaller than advertized, the screen cannot be read under direct sunlight, a button must be pressed to check the time, the smartband is not as waterproof as advertized, and the Android app is a disaster. Despite all these issues, I still wear it everyday, as it helps me walk or run a bit more if I have not reached my daily target. The company has now release a new model Vidoon X6 that I discovered today on DealExtreme for $33.90. Vidonn X6 specifications: MCU/Memory – Unknown Display – 0.88″ OLED display (vs 0.49″ for X5) Connectivity – Bluetooth 4.0 LE and micro USB Battery – 45 mAh Li-battery (vs 40 mAh) good for 15 days in standby mode. IP Rating – IP65 (Dust-proof and […]

February 2, 2015November 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 115 Comments

Raspberry Pi 2 / ODROID C1+ Development Boards Comparison

Raspberry Pi 2 Model B board has just been released, and although it’s not a direct answer to ODROID-C1, as Broadcom started the design for BCM2836 SoC for RPI2 a long time ago, both low cost development boards have similar specifications, with a quad core processor, 1GB RAM, Ethernet, and four USB ports, as well as the exact same price: $35. So I’ve decided to compare both in details to find out the actual differences, and which one may be more suitable to a particular application. Let’s get straight to the comparison table. [Updated on November 24 to use ODROID C1+ instead of ODROID C1] Hardkernel ODROID C1+ Raspberry Pi 2 Model B Comment Processor Amlogic S805 quad core Cortex A5 @ 1.5 GHz (Overclockable to 1.7 GHz or more) Broadcom BCM2836 quad core Cortex A7 @ 900 MHz (Overclockable to 1.1GHz or more) Despite the architecture advantage for Cortex […]

January 26, 2015March 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

X29 Intel Celeron J1800 / J1900 mini PC Sells for $125 and Up

Today, somebody asked me to test 4K output on Intel Atom Z3735F, but I can’t do that since the platform only supports 1080p. As I just posted my unboxing of MeLE PCG03 mini PC, I noticed several ICs where added for extra functionalities, and people also started to complain about lack of Gigabit Ethernet, Fast Ethernet via a USB bridge, no USB 3.0, and no SATA. That’s what happens when you use a Tablet SoC in a mini PC, but if you’re ready to pay a little more, you could still get a mini PC with a proper desktop processor (Bay Trail-D) including SATA, USB 3.0, and Gigabit Ethernet (maybe) for about $125 (shipped) with X29-J1800 computer powered by Intel Celeron J1800 (10W TDP). That’s the price for the barebone system without RAM or storage, and if you want a complete system with 32GB eMMC and 4GB RAM the price […]

January 14, 2015January 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

AMD Mullins Powered Compulab Fitlet mini PCs Run Linux Mint or Windows

Finally an alternative to the recent wave of Intel Bay Trail-T mini PCs and sticks thanks to Compulab Fitlet mini PCs powered by AMD Mullins APUs, namely AMD A4 Micro-6400T and E1 Micro-6200T, with Radeon graphics, supporting up to 8GB RAM, mSATA, up to two HDMI port, up to four Gigabit Ethernet ports, and more. There are three Fitlet models: Fitlet-i, Fitlet-X with four Gigabit Ethernet port, and Fitlet-B, the entry-level option. In Q2 2015, a MintBox mini model running Linux Mint will also be released. Fitlet-i specifications: SoC – AMD A4 Micro-6400T 64 bit quad-core processor up to 1.6 GHz with Radeon R3 Graphics (4.5W TDP) System Memory – Up to 8 GB DDR3-1333 (1x SODIMM) Storage – mSATA up to 1 TB (SATA 3.0), power eSATA (5V), and micro-SD slot (SDXC support, rate 25 MB/s) Video Output – Dual HDMI 1.4a up to 1920×1200@60Hz Audio I/O – HDMI, S/PDIF […]

January 6, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Easily Create an Android Bootable SD Card for Allwinner A80 Devices with PhoenixCard Tool

We’ve already seen how it was possible to boot Linux or Android on Rockchip RK3288 devices from an SD card, which involved getting the stock firmware and running some scripts in Linux. Today, Freaktab member no_spam_for_me found out how to create a bootable SD card for Tronsmart Draco AW80 Meta, and other Allwinner A80 devices using PhoenixCard 3.09 tools for Windows (The latest version should be available @ http://dl.cubieboard.org/model/cc-a80/Tools/Flash-firmware-tools/). There may also be a way to use LiveSuit tools for Linux, but this have not been tested. Once you have installed the tools, start it, and load the firmware by clicking on “Img File” button (Here Draco AW80 Finless 1.1 firmware was used). Then press DiskCheck to scan for storage devices, and select your SD card in the drop-down menu “disk” (not sure why it’s blank in the screenshot above), select “Startup !” write mode, and click on the “Burn” […]

January 6, 2015January 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

ECS LIVA X Bay Trail Mini PCs Support Up to 4GB RAM, Windows and Linux OS

ECS LIVA was on of the first Bay Trail mini PC available on the market, and included both memory and storage. Elitegroup Computer System (ECS) has now officially announced an upgrade at CES 2015 with ECS LIVA X, another Bay Trail-M/I mini PC with up to 4GB, and 64GB storage. LIVA X specifications: SoC – Intel Bay Trail-M / I SoC up to 2.25 GHz. The M version is most probably featuring a dual core Celeron N2808 processor. System Memory – 2 or 4GB DDR3L Storage – 32 or 64GB eMMC + mSATA for SSD. 64Mb SPI Flash ROM with AMI BIOS. Video Output – 1x HDMI, 1x VGA. Dual independent displays supported. Audio – 1x audio combo jack (LIne In and Mic IN); Realtek ALC283 HD codec Connectivity 1x Gigabit Ethernet (Realtek RTL8111G) 802.11 b/g/n Wi-Fi and Bluetooth 4.0 USB – 1x USB 3.0, 2 x USB 2.0 […]

December 30, 2014August 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

LA1016, LA2016, and LA5016 Logic Analyzers Cost as Low as $75

I remember 10+ years ago, when my managers argued whether buying a logic analyzer, because some of its functions could be done by an oscilloscope, and logic analyzers were selling for a few thousands dollars at the time. Fast forward to 2014, it’s now possible to acquire lower end logic analyzers that connect to a PC for as low as $75 thanks to products such as LA1016, LA2016, and LA5016, all supports 16-channels and respectively 100, 200 and 500 Mbps sampling rate. Key features and specifications: Input channels – 16 Max Sampling Rate: LA1016: 100M; LA2016: 200M; LA5026: 500M Measurement Bandwidth – LA1016: 20M; LA2016: 40M; LA5016: 80M Min pulse width – LA1016: 20ns; LA2016: 12.5ns; LA5016: 6.25ns Hardware memory size – LA1016/LA2016: 1Gbits; LA5016: 512Mbits Hardware sampling depth – LA1016/LA2016: 50M/channel; LA5016: 32M/channel Max compressed depth – LA1016/LA2016: 10G/channel; LA5016: 5G/channel Input voltage range – -50V ~ +50V Input […]