windows News - Page 12 of 20 - CNX Software

August 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Fitlet H mini PC is Powered by AMD A10 Micro-6700T SoC

At the beginning of the year, Compulab announced several Fitlet mini PCs powered by AMD Mullins processors. Missing from the original offering was the top of the line A10 Micro-6700T quad core processor, but the company’s latest Fitlet H integrates the more powerful, yet still low power, processor. Fitlet H specifications: SoC – AMD A10 Micro-6700T 64 bit quad-core processor @ up to 2.2 GHz with AMD Radeon R6 Graphics (4.5W TDP). System Memory – 2x SODIMM slots for up to 16 GB DDR3L-1333 Storage – Internal 2.5” HDD/SSD (SATA 3.0) + mSATA 3.0 + micro-SD Video Output – 2x HDMI 1.4a up to 1920 x 1200 @ 60Hz Audio – Realtek ALC888-VC2 HD audio codec; S/PDIF 7.1 input/output + stereo line-out / MIC in Connectivity 2x Gigabit Ethernet (Intel i211 Ethernet controllers) WLAN 802.11ac (2.4/5GHz dual band Intel 7260HMW) + Bluetooth 4.0 with two external antennas Cellular – mini-PCIe for […]

August 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

VIA Introduces AMOS-3005 Fanless Rugged Computer with Eden X4 x86 Processor, and VX11 Media Processor

VIA Embedded Store has just sent a newsletter to announce the launch of the company’s latest rugged embedded computer, AMOS-3005, powered by VIA Eden X4 processor and VX11 media processor and chipset, supporting temperature ranges from -10°C to 60°C, and featuring a flexible 9V-36V DC input. AMOS-3005 specifications: Processor – VIA Eden X4 quad core 64-bit x86 processor @ 1.2 GHz (NanoBGA2 package) with 2MB L2 cache, 1066 MHz front side bus Chipset – VIA VX11 Media System Processor with an integrated VIA Chrome 640/645 graphics processor supporting DirectX 11, and OpenCL, as well as a VIA ChromotionHD 5.0 video engine supporting dual 1080p HD decoding of H.264, MPEG-2, WMV9, and VC-1 codecs. System Memory – 1x DDR3 1333 SDRAM SODIMM socket (Up to 8GB memory size) Storage – 1x mSATA slot, 32Mbit Flash memory for AMI BIOS. Video Output- 1x HDMI, 1x VGA up to 2048×1536, with dual independent […]

August 12, 2015August 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Intel Skylake-U Processors Run as Low as 7.5W TDP. A Closer Look at Configurable TDP

I try to mostly cover low power systems on this blog, so when it comes to x86 processors I have a cut off TDP of 10 Watts. The next generation of Intel Skylake processors have a TDP of 15 Watts, but when I read Skylake-U lineup post on FanlessTech, I discovered Intel processors also have a configurable TDP option, and in the case of Skylake-U processor their configurable TDP (cTDP) can be as low as 7.5W or 10W depending on models. U-Processor family has Pentium and Celeron processors, but also Core i3, Core i5 and even Core i7 processors such as i7-6600U and i7-6500U clocked up to 3.4 GHz and all with a 15W TDP, but you’ll also notice a column called “cTDP Down” showing 7.5W and 10W values, which shows the great progress made by Intel with regards to low power design. So I decided to look into configurable […]

August 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MeegoPad T03 TV Sticks Runs Windows 8.1 and Android 4.4, Features an Improved Thermal Design

If you were expecting a new processor for MeegoPad T03, you’ll be disappointed that hardware-wise the third MeegoPad hardware specifications are basically the same as MeegoPad T01 and T02, but the new version of the stick should not get as hot as the first two versions, and runs a dual boot image with Windows 8.1 and Android 4.4, that can be upgraded to Windows 10, contrary to some other dual boot Bay Trail devices. MeegoPad T03 specifications are indeed mostly the same of the previous models: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz – 1.83 GHz with Intel HD graphics Gen 7 System Memory – 2 GB DDR3L Storage – 32 GB eMMC + micro SD slot up to 64GB Video & Audio Output – HDMI 1.4 Connectivity – 802.11 b/g/n Wi-Fi and Bluetooth 4.0 USB – 1x USB 2.0 host port, 2x micro […]

August 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Gigabyte GB-BACE-3000 is a Fanless mini PC Powered by Intel Celeron N3000 Braswell Processor

Systems with the latest low power Intel Braswell processors are starting to hit the shelves, and after ASRock Beebox, some Braswell laptops, Intel Braswell NUCs, and some ASRock motherboards, here’s another Braswell mini PC with Gigabyte BRIX GB-BACE-3000 based on Intel Celeron N3000 dual core processor. GB-BACE-3000 specifications: SoC – Intel Celeron N3000 dual core processor up to 2.08GHz with Intel Gen8 HD Graphics (4W TDP) System Memory – 1x SO-DIMM DDR3L 1.35V slot @ 1066/1333/1600 MHz up to 8GB RAM Storage – 2.5” thickness 7.0/9.5mm Hard Drives (1 x 6Gbps SATA3), 1 x Micro SD card slot Video Output HDMI up to 3840×2160 @ 30 Hz VGA up to 1920×1200 @ 60 Hz Audio – Realtek ALC255 audio codec, 1x Audio-out / Mic-In, HDMI Connectivity – Gigabit LAN (Realtek RTL8111H), Wi-Fi 802.11ac + Bluetooth 4.0 (M.2 module) USB – 2 x USB 3.0 ports (front panel), 2 x USB […]

July 31, 2015August 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Freaks3D is a Low Cost Portable 3D Printer (Crowdfunding)

ElecFreaks is a design house based in Shenzhen that caters to makers and startups, and started selling Arduino shields and accessories, as well as Raspberry Pi add-on boards, before moving to robotics kits, 3D printers, and other tools in demand by electronics hobbyists. The company has now designed Freaks3D portable 3D printer, and launched an Indiegogo campaign to fund production. Freaks3D printer specifications: Technology – Fused Deposition Modeling Build Volume – 130 x 150 x 100 mm (LxWxH) Nozzle Size – Standard 400 microns Resolution – Layer: 100 microns; XY: 50 microns Filament diameter – 1.75mm Filament Material – PLA or TPU 3D Files Transfer – USB via PC, or SD card Misc – LCD Display, one button operation, printing bed does not require heating Power Supply – 12V / 8A power adapter, or 12V / 5A power bank (Not included) Dimensions – 290 x 320 x 325 mm Weight […]

July 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Kodi 15 Isengard Release

After several months of development, including H.265 hardware decoding in Android, Kodi 15 “Isengard” has recently been released by the developers. It’s available for Windows, Linux, Mac OS X, and Android, and for the first time a stable release can directly be downloaded from Google Play store with so far over 400,000 active installs from the app store. Key features and improvements of Kodi 15 include: Android specific changes – 4K, refresh rate switching and H.265 for hardware that support it including several Amlogic platforms, and Nvidia Shield Android TV. Android 5.0 and greater is required. New chapter selector window – Allows users to visually browse and select chapters from mkv videos and other containers that support chapters Adaptive seeking (aka Skip Steps) – The more times a user presses a button to seek in a period of time, the larger the jump forward or backward will be. Audio and […]

April 22, 2015April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Various Ways to Control a mini PC without IR Receiver for HTPC Use

Low cost Intel Bay Trail mini PCs such as Pipo X7, MeegoPad T01, MeLE PCG03, etc… almost all share one thing in common: they lack an IR receiver, and for people who’d like to use their box as a dedicated HTPC running Kodi for example, this could be a problem as connecting a keyboard might not the best of solutions. Since I’ve been asked about this recently, I’ve decided to dig into the issue to see what options could be available, and I also hope to trigger a discussion in comments to discover other interesting solutions. RF Air Mouse I’m using MeLE F10 Deluxe air mouse during my reviews, and such device can be used with HTPC. You just need to connect a tiny USB RF dongle to one of the USB ports of your mini PC, and you’d ready to go with having to configure anything. In Kodi, you […]