wifi

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on $30 CoreWind Tech WiFiG25 SoM Features Atmel SAM9G25 ARM9 Processor and a Wi-Fi Module

$30 CoreWind Tech WiFiG25 SoM Features Atmel SAM9G25 ARM9 Processor and a Wi-Fi Module

After their Aria G25 clone, called CORE9G25, CoreWind Tech has now launched a new SoM, WiFiG25, also powered by Atmel SAM9G25 ARM9 processor, but this time with a WiFi Module based on Realtek RTL8188, and up to 256 MB RAM, 256 MB Flash. Here are the specs of this system-on-module: CPU – Atmel AT91SAM9G25 ARM9 @ 400Mhz System Memory – 128 or 256 MB DDR2 Storage – 256MB NAND Flash, micro SD card slot Connectivity – WiFi Module with internal antenna 2x20Pin 2.54mm expand interface (through holes) with access to 2x USB host ports, 3x UART, 1x I2C, 1x SPI, 6x PWM, 27x GPIOs, and 4x 10-bit ADC Line level – TTL 3.3V Misc – User LED Power supply – 5V Dimensions – Size: 50.80 x 30 mm Weight – 5g Temperature range –  Commercial: 0 to 70 °C, or industrial: -20 to 85 °C The company provide Linux 3.6.9 for the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 42 Comments on Amlogic GPL Source Code Release – Kernel 3.10, U-Boot, and Drivers (Wi-Fi, NAND, TVIN, Mali GPU)

Amlogic GPL Source Code Release – Kernel 3.10, U-Boot, and Drivers (Wi-Fi, NAND, TVIN, Mali GPU)

Last month, I noticed Amlogic provided links to the Android SDK for S802 / M802 on their open source website, but the only way to get the source was to share your SSH public with Amlogic, so that they give you access. It did not happen, but the company has released the source for Linux 3.10.10, U-boot 2011.03, Realtek and Broadcom Wi-Fi drivers, NAND drivers, “TVIN”drivers, and kernel space GPU drivers for Mali-400 / 450 GPU. There are also some customer board files for Meson 6 only (AML8726-MX / M6) but they do not seem to match the kernel… If you want to build the kernel, including the drivers, you’ll need to download a bunch of files: wget http://openlinux.amlogic.com:8000/download/ARM/kernel/arm-src-kernel-2014-03-06-d5d0557b2b.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/rtk8192du-2014-03-06-7f70d95d29.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/rtk8192eu-2014-03-06-9766866350.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/rtk8192cu-2014-03-06-54bde7d73d.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/rtk8188eu-2014-03-06-2462231f02.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/brcmap6xxx-2014-03-06-302aca1a31.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/wifi/wifi-fw-2014-03-06-d3b2263640.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/modules/aml_tvin-2014-03-06-fb3ba6b1c8.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/modules/aml_nand-2014-03-06-39095c4296.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/customer/aml_customer-2014-03-06-76ce689191.tar.gz wget http://openlinux.amlogic.com:8000/download/ARM/gpu/gpu-2014-03-06-0425a1f681.tar.gz You’ll need to extract these tarballs in specific directories:

You […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Atmel Introduces ARM Cortex M0+ based SmartConnect Wi-Fi Modules and SmartConnect Zigbee SoCs

Atmel Introduces ARM Cortex M0+ based SmartConnect Wi-Fi Modules and SmartConnect Zigbee SoCs

In order for the Internet of Things to take off, wireless connectivity solutions with ultra low power, lost cost, and small footprint are needed. Atmel seems to have made a step in the right direction by launching SmartConnect Wi-Fi modules and Zigbee SoCs featuring an ARM Cortex M0+ core. SmartConnect Wi-Fi does not appear to be a single chip solution, but instead Atmel has created a family of Wi-Fi modules integrating the company’s ultra-low power Wi-Fi SoChip with an ARM Cortex M0+ based MCU. These modules will enabled battery-powered Wi-Fi connectivity for IoT endpoints such as thermostats, and temperature sensors in a cost effective way. The company will provide a software solution with application and security protocols such as TLS, TCP/IP stack and an RTOS, all of which can be downloaded via Atmel Studio 6 Integrated Development Platform (IDP). SmartConnect ZigBee SAM R21 combines an ARM Cortex M0+ core with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on 802.11ah Wi-Fi (900 MHz) to Provide Low Power, Long Range Connectivity for the Internet of Things

802.11ah Wi-Fi (900 MHz) to Provide Low Power, Long Range Connectivity for the Internet of Things

Most devices now feature Wi-Fi modules capable of handling 802.11 b/g/n at 2.4 Ghz (and 5 GHz for dual band Wi-Fi), and newer devices and routers boast 802.11ac connectivity @ 5GHz with increased bandwidth (up to 1.2 Gbit/s in theory, maybe around 400 Mbit/s in practive), and in some case increased range with  beam-forming. But thanks to an article on EETimes, I’ve learned there’s another upcoming Wi-Fi standard called 802.11ah operating in the 900MHz range, with data rates from 150 Kbit/s with a 1 MHz band to as much as 40 Mbit/s over an 8 MHz band, lower power consumption, and a least double of the range of a typical 802.11n device,capable of covering an area of about 1 km2. The target applications are sensors networks, backhaul networks for sensor and meter, and extended range Wi-Fi, as the standard allows long range and more clients at low bitrates. This new […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on U-BRAIN MicroSmart is a Tiny “15-Axis” Sensor Module with Bluetooth or Zigbee Connectivity

U-BRAIN MicroSmart is a Tiny “15-Axis” Sensor Module with Bluetooth or Zigbee Connectivity

Usuda Research Institute & Systems Corporation has just announced U-BRAIN MicroSmart, a tiny and lightweight 3D modules module with a “15-axis” sensor, 5 GPIOS, as well as optional Zigbee and Bluetooth connectivity allowing up to 100 meter range. The module targets wearable devices used for fitness and health applications. U-BRAIN MicroSmart (UBN-MS8) Specifications: Processor –  MCU + DSP Sensors – 6-axis position sensors, 3-axis posture sensor, 3-axis direction sensor, 1 temperature sensor, 1 audio sensor, and 1 light sensor. Connectivity – Optional? Bluetooth 2.1 + EDR or ZigBee with up to 100 meter range. GPIO – 5 GPIOS, TTL. Power Consumption – 10 mA max during use, 100 uA max in sleep mode Power – Via microUSB port Dimensions – 20 x 19 x 3.8 mm Weight – 2g to 5g depending on presence and selection of communication module The module will support Windows XP/Vista/7/9.0/8.1, Android 2.3 and greater, iOS, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on eConais WiSmart EC19D is an 8x8mm Wi-Fi Module for the Internet of Things

eConais WiSmart EC19D is an 8x8mm Wi-Fi Module for the Internet of Things

eConais, a company specializing in ultra low power embedded Wi-Fi modules, has recently announced WiSmart EC19D Wi-Fi module which it claims to be “the world’s smallest, most easily integrated, and lowest standby power single chip 802.11b/g/n Wi-Fi System In Package (SiP) modules for the Internet of Things”. This Wi-Fi module comes with the following features: Wi-Fi – 802.11 b/g/n,Wi-Fi Direct, WPS, Wi-Fi Client Mode, Wi-Fi SoftAP Mode Security – WPA/WPA2 support ProbMe Configuration – Proprietary configuration method which enables any Wi-Fi device to configure the EC19D module without the need of any application Protocol – TCP/UDP sockets, HTTPS/SSL, DHCP Client/Server MCU I/F – Serial Cloud Service Support (Xively) Concurrent DLNA Renderer & Server (Q1 2014) OTA FW Upgrade (Q1 2014) Dimensions – 8x8mm Certifications – FCC, IC, and EC There’s no data about standby power consumption, so it’s difficult to verify the company claim, however at 8x8mm, it could well […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Xiaomi MiWiFi 802.11ac NAS Powered by Broadcom BCM4709 SoC

Xiaomi MiWiFi 802.11ac NAS Powered by Broadcom BCM4709 SoC

Last month, Xiaomi teased the public with pictures of a new device, but gave very few details. The company have now provided further details, and the box shown below turns out to be an 802.11 NAS (Network Access Storage) powered by Broadcom BCM4709 dual core Cortex A9 Wi-Fi 802.11ac SoC. Xiaomi provided the following technical specifications for MiWiFi NAS: SoC – Broadcom BCM4709 dual-core Cortex A9 processor @ 1 GHz System Memory – 256MB DDR3 Storage – SATA interface with 1TB Hard drive Connectivity 2x Gigabit Ethernet RJ45 ports Dual band WiFi 802.11ac (2.4/5GHz) NFC (at the top of the device) USB – 1x USB 2.0 host port Misc – Fan for cooling The company will launch a sale for Beta units on the 19th of December, for the Chinese market only, and the NAS will come disassembled in a wooden case with a TB harddrive, a power supply, cables, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Microchip Unveils chipKIT Wi-Fi Development Board and Motor Control Shield

Microchip Unveils chipKIT Wi-Fi Development Board and Motor Control Shield

Microchip Technology has just announced two new boards by Diligent, part of its Arduino compatible chipKIT ecosystem: chipKIT WF32 board featuring a PIC32 MCU and a Wi-Fi module, and chipKIT Motor Control Shield for servos, steppers, and DC motors. chipKIT WF32 Development Board Board specifications: MCU – Microchip PIC32MX695F512L micro-controller (80 Mhz 32-bit MIPS, 512K Flash, 128K SRAM) External Storage – Micro SD card connector Wi-Fi – IEEE 802.11 b/g via Microchip MRF24WG0MA WiFi module USB – USB 2.0 OTG controller with A and micro-AB connectors for debugging and programing. 43 available I/O pins with 12 analog inputs Misc – 4x user LEDs PC connection uses a USB A > mini B cable (not included) Power – 7V to 15V input voltage (recommended), 3.3V operating voltage, 30V input voltage (maximum), 0V to 3.3V analog input voltage range Microchip has also released an embedded cloud software framework to create Internet of Things […]

Exit mobile version
UP 7000 x86 SBC