wifi News - Page 108 of 113 - CNX Software

June 12, 2014June 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Meet Samsung Smart Bike fitted with an Arduino, a Rear Camera, Lasers and More

Samsung Maestros Academy has introduced a Smart Bike prototype integrating various “smart” components within its aluminum frame, such as an Arduino board connected to a Wi-Fi + Bluetooth module, a battery, four laser projectors, and a digital camera controlled by a Samsung smartphone. The camera is fitted at the back just under the seat, and allows the riders to have a real-time rear view image on the phone. The four lasers are used to create a virtual bike lane in case a real one is missing, and remind other drivers to keep a safe distance to your bicycle. The bike can also detect ambient conditions using the smartphone sensors, and modify its behavior. For example, it can switch on or off the laser beams depending on the brightness sensor data from the smartphone. Each bike also tracks daily routes of the riders using GPS, and can let local authorities know where bicycle traffic is most intense, and […]

May 30, 2014May 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

WifiDuino Arduino Compatible Wi-Fi Board Features an Optional OLED Display (Crowdfunding)

Getting Wi-Fi with Arduino can be relatively expensive, and may take a little too much space. Spark Core board greatly addressed both price ($39) and form factor issue last, but there’s another option coming to market thanks to WifiDuino a $34 board with Wi-Fi, that’s tiny and Arduino compatible. An OLED display is also available as an option, at a lower price point than MicroView board, and including Wi-Fi or not, depending on the perk. WifiDuino hardware specifications: MCU – Atmel Atmega32U4 (same as Arduino Leonardo) Display – Optional 128×64 OLED display Connectivity – Optional Wi-Fi 802.11 b/g with STA, AP and ADHOC network modes Digital I/Os – 20 Analog I/Os – 12 Other I/Os – 7x PWM, UART, I2C, SPI Power – 5V Dimensions – Duino board only without Wi-Fi nor OLED: 25.6mm x 38.8mm x 11.0mm WifiDuino support the Arduino IDE, so you can write you sketch as […]

May 30, 2014May 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

AsiaRF AWM002 Wi-Fi Module and a Tiny IoT Server Kit Get Crowdfunded for $15 and Up

VoCore Wi-Fi module selling for $15 to $20, and it’s corresponding VoCore Dock with Ethernet has been quite popular, and at the time of writing, the project has already received $40,000 in funding with 50 more days to go. But if you’d rather get something for the same price, a few months early, and an already FCC/CE certified and proven module and tiny IoT server, AsiaRF has also launched a crowdfunding campaign for their AWM002 Wi-Fi module running OpenWRT on the same Ralink RT5350 found on the VoCore. as well as AWM002 Tiny Kit which adds Ethernet and USB, and a larger board with easier access to all ports and I/Os. As a reminder, let’s go through AWM002 specifications again: SoC – Mediatek/Ralink RT5350 MIPS 74KEc core @ 360 MHz dual band 802.11n Wi-Fi with data Rate up to 150Mbps, hardware NAT, QoS, TCP/UDP/IP checksum offloading. System Memory – 32 MB Storage […]

May 22, 2014May 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

$15 Open Source Hardware VoCore Wi-Fi Module Runs OpenWRT (Crowdfunding)

There are already low cost Wi-Fi modules that can be used for the Internet of Things such as AsiaRF AWM002 and Hi-Link HLK-RM04. However, AsiaRF mainly caters to companies, and the Hi-Link module has a limited memory (16MB), which may or may not be an issue depending on your application. VoCore Wi-Fi module could prove to be an interesting option as it is the same $15 to $20 price range, runs OpenWRT with 32 MB RAM, will be open source hardware, and provides up to 20 GPIOs in a tiny (25x25mm) form factor. VoCore Wi-Fi module specifications: SoC – Ralink/Mediatek RT5350 MIPS processor @ 360MHz with dual band 802.11n Wi-Fi with data Rate up to 150Mbps System Memory – 32 MB RAM Storage – 8MB SPI Flash (for firmware) / 16 MB on limited edition Available Signals (Via through holes): 10/100M Ethernet USB UART, I2C, SPI I2S, PCM JTAG Over 20 […]

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

GainSpan Introduces Full HD Video Application Development Kit for Wi-Fi IP Video Streaming Applications

GainSpan, a company providing low-power Wi-Fi solutions for the Internet of Things, and GEO Semiconductor, a semiconductor and software company specializing in camera and video solutions, have recently announced a Full HD resolution Video Application Development Kit (ADK) targeted at Wi-Fi video streaming applications in the surveillance, security and automotive markets such as battery or line powered IP cloud cameras, door bell cameras, baby monitors, toy cameras and automotive backup/drive recorder cameras The development kit features GainSpan GS2011MIZ low power IEEE 802.11b/g/n module, and GEO Semi MAX64380 1080p30 H.264 Camera CODEC, as well as MAXIM MAX9860 mono audio codec, and MAX98300 Class D amplifier. GainSpan Full HD Video ADK (GS-ADK-VideoGeo1080p) key features include: GS2011MIZ module with low power IEEE 802.11b/g/n compliant module with PHY rates up to 72 Mpbs. Supports Limited AP, Wi-Fi Direct with concurrent mode, WPS2.0. Wi-Fi Security – 802.11i, WPA/2, Personal and Enterprise, legacy WEP, TLS Full […]

May 7, 2014May 7, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

DLink Introduces DSP-W215 Wi-Fi Smart Plug for iOS and Android

D-Link is entering the automation market with a Wi-Fi smart plug (Model DSP-W215) that configurable via WPS, allows you to control and monitor your electrical appliance via Android 4.0+ and iOS6+ mobile devices, and it even has an overheating protection mechanism that can apparently detect if the plug or the device itself overheats. Let’s go through the technical specifications: Wi-Fi – IEEE 802.11n (According to pictures found via FCC filings, the chipset is Atheros AR1311_AL1A) Misc – Power / Status LEDs, On/Off button Dimensions – 9 x 6.10 x 3.56 cm (3.54″ x 2.40″ x 1.40″) Weight – 125 g (4.41 ounces) Power Input – 100 to 125 V AC / 5W maximum power consumption Temperature Range – Operating: 0 to 40 °C, Storage: -20 to 65 °F Humidity – Operating: 10% to 90% non-condensing, Storage: 5% to 95% non-condensing Based on these specs, since it can only work between 100 […]

April 28, 2014May 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

$15 AsiaRF AWM002 & AWM003 Wi-Fi Modules Run OpenWRT, Expose GPIOs

This week-end I explained how to build a web server that could be used for automation and other Internet of things applications for less than $15 by combining an Arduino Leonardo with ECN18J60 Ethernet module. The hardware itself is cheap, but it may not always be convenient, or cost effective, to wire your house or office with Ethernet cables. One solution is to use Wi-Fi modules such as TI CC3000 evaluation module, an Electric Imp module, or Ariettea G25 + Wi-Fi board, but these usually cost between $30 to $50 in single quantity. AsiaRF AWM002 and AWM003 are low cost 802.11n Wi-Fi modules with access to GPIOs that could be an interesting alternative as they cost $15 + shipping, and even below $10 in quantities. The only difference between the two is that AWM003 supports more RAM (64MB vs 32MB). Here are the specifications for these modules: SoC – Mediatek/Ralink […]

April 21, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mediatek MT8639 Wi-Fi Display SoC to Support 802.11ac, NFC

Wi-Fi display technologies such as Miracast and Airplay allow you to conveniently mirror your mobile device on your TV without the needs to connect any cables, and for over about a year we’ve seen Miracast, Airplay, DLNA, and EZcast dongles on the market. In theory, this is all great, but in practice, this is all too often disappointing because of lag, sometimes the video quality is very poor, and sometimes it won’t connect. Mediatek is now working on MT8639 supporting 802.11ac which will hopefully offer a more consistent and enjoyable user experience, if your mobile device also supports 802.11ac. Here are the main features of the chip: ARM Cortex A7 @ 1 GHz Wi-Fi Dual band 2.4Ghz and 5 GHz 802.11 b/g/n/ and 802.11ac Wifi-Direct, Wi-Fi SoftAP, and Wi-Fi Bridge support Optional NFC support Wi-Fi Display – DLNA, Airplay, Miracast, “Windows” mirror Video Output – HDMI 1.4 / MHL 2.0 […]