Earlier this year we wrote about Wallys Communications DR6018-V2 WiFi 6 embedded router board based on Qualcomm IPQ6010 processor with M.2 sockets for optional 5G and WiFi 6E cards. The company has now launched a more compact, and cheaper board with DR6018-S SBC based on the same processor with 802.11ax WiFi 6 and 802.11 b/g/n/ac WiFi 5 support, plus an M.2 socket for people wanting to add WiFi 6E cards. DR6018-S board specifications: SoC – Qualcomm Atheros IPQ6010 quad-core Arm Cortex-A53 processor @ 1.8 GHz System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, optional SD card slot Networking Wired – 2x Gigabit Ethernet port including one with PoE support Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, max 20dBm per chain 4x u.FL connectors […]
ASRock NUC 1100 BOX Series mini PC Offers 2.5GbE, WiFI 6, and quad 4K output
The new Tiger Lake UP3 embedded processors have enabled industrial mini PCs and motherboards to get higher-end features including 2.5 GbE, WiFI 6, USB 4.0, and support for up to four independent 4K displays. ASRock industrial already unveiled ASRock iBOX 1100 rugged mini PC last month, but the company is now back with an even more compact Tiger Lake UP3 mini PC that offers quad 4K video output, 2.5GbE, and WiFi 6 connectivity. Meet ASRock NUC 1100 BOX Series industrial computer designed for entertainment, gaming, office collaboration, content creation, retail, and business applications. ASRock NUC 1100 specifications: SoC NUC BOX-1165G7 – Intel Core i7-1165G7 quad-core/octa-thread Tiger Lake UP3 processor @ up to 1.2 GHz / 4.7 GHz (Turbo) with 96EU Iris Xe Graphics; 15W TDP (Configurable between 12 and 28W) NUC BOX-1135G7 – Intel Core i5-1135G7 quad-core/octa-thread Tiger Lake UP3 processor @ up to 0.9 GHz / 4.2 GHz (Turbo) […]
NXP IW620 2×2 Wi-Fi 6 & Bluetooth 5.1 Chip Targets Gaming, Audio, Industrial and IoT Markets
NXP has announced the IW62X WiFi 6 & Bluetooth 5.1 family of chips designed for high-end gaming, audio, industrial and IoT markets. The family currently consists of IW620 and IW620S parts with respectively PCIe and SDIO host interfaces. Both chips integrate dual-band Power Amplifiers (PAs), Low Noise Amplifiers (LNAs), and switches in order to reduce the board-level BOM (Bill of Materials). IW62X key features and specifications: Wi-Fi 6 (802.11ax) 2×2 Wi-Fi 6 DB (802.11ax) 1024 QAM, 80MHz Peak Throughput: 1.2 Gbps Improved wideband noise & MU-MIMO performance Advanced active channel scanning 802.11s, EasyMesh 802.11mc Bluetooth & Bluetooth Low Energy 5.1 BLE 2Mbps + Long Range BLE direction finding with Angle of Arrival (AoA) and Angle of Departure (AoD) BLE Mesh Antenna support 2×2 5G 1×1 2.4G + BT Multimode energy-efficient support (TWT, Micro AP, TX Power Control, Wi-Fi Direct, BT5.1) Host Interfaces IW620 – PCIe 1.0 IW620S – SDIO 3.0 […]
MediaTek T750 5G Chipset to Power Fixed Wireless Access Routers and 5G Mobile Hotspots
Most of the 5G modem we covered are designed for mobile devices, but 5G technology also brings opportunities for fixed wireless access routers (FWA routers) potentially replacing fixed broadband modem routers, as well as for 5G mobile hotspots to add coverage in areas without reliable cellular signal. Those are the two markets targetted by the just-announced 7nm MediaTek T750 quad-core Arm processor with support for sub-6GHz frequencies aiming to affordable broadband connectivity to areas with limited DSL, cable, or fiber services, or on the contrary adding wireless services in suburban, rural, and less developed areas. Mediatek T750 5G SoC highlights: Processor – Quad-core Arm Cortex-A55 CPU GPU / Display – Embedded GPU and display driver to support up to 720p displays Cellular Networking 5G NR FR1 modem with sub-6GHz frequencies support and two-component carrier aggregation (2CC CA) for extended coverage Standalone and non-standalone (SA/NSA) modes supported 5CC LTE carrier aggregation […]