wetek News - CNX Software - Embedded Systems News

May 5, 2024May 6, 2024 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

LibreELEC 12 released with Kodi 21, 64-bit Arm support for Raspberry Pi 4/5, and platforms

As one should have expected after the Kodi 21 “Omega” release last month, the LibreELEC 12 lightweight Linux media center distribution is now out with many devices updated to 64-bit, including the Rasberry Pi 4 and 5 SBCs. LibreELEC 11 was released last year based on Kodi 20 “Nexus” and bringing back support for Amlogic devices. LibreELEC 12 builds on that and benefits from the new features added to Kodi 21 such as FFmpeg 6 and works on Arm platforms based on Allwinner, Amlogic, Broadcom (Raspberry Pi), and Rockchip processors, as well as generic x86 computers. It’s an easy option to create a dedicated HTPC based on a range of hardware with all the features brought by Kodi 21 media center. Since so many platforms are supported there are always some limitations for each and known problems: Raspberry Pi – 50/60fps H.264 HW decoding may need force_turbo=1 or core_freq_min=500 in […]

October 12, 2020October 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Linux 5.9 Release – Main Changes, Arm, MIPS & RISC-V Architectures

Linus Torvalds has just announced the release of Linux 5.9 on lkml: Ok, so I’ll be honest – I had hoped for quite a bit fewer changes this last week, but at the same time there doesn’t really seem to be anything particularly scary in here. It’s just more commits and more lines changed than I would have wished for. The bulk of this is the networking fixes that I already mentioned as being pending in the rc8 release notes last weekend. In fact, about half the patch (and probably more of the number of commits) is from the networking stuff (both drivers and elsewhere). Outside of that, the most visible thing is a reinstatement of the fbdev amba-clcd driver – that’s a noticeable patch, but it’s basically just mainly a revert. The rest is really really tiny (mostly some other minor driver updates, but some filesystem and architecture fixes […]

January 28, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

WeTek Air Hybrid 4K HDR Set-top Box Now Available for 119 Euros and Up

We previously covered WeTek Air, an upcoming Android TV set-top box taking DVB-T2/C, DVB-S2 or ATSC tuner cards and certified by Google. The company has now officially launched the device, and you can buy WeTek Air for 119.00 Euros without tuner or for 129.90 Euros with either a DVB-S2 or DVB-T2/C tuners. Just two caveats, only 400 pieces are available now, and they will only ship to Europe, although a worldwide launch is planned for the next batch. Here’s a reminder of the specifications: SoC – Amlogic S905D quad core Arm processor System Memory – 2 GB DDR4 Storage – 16 GB eMMC flash + micro SD card slot Video & Audio Output – HDMI 2.0a up to 4K @ 60Hz with HDR-10 support Video codecs – H.265 & H.264 AVC up to 4K60Hz, H.264 MVC, MPEG-4 ASP, VC-1, AVS, MPEG-2, MPEG-1 up to 1080p60 Audio codecs – MP3, AAC, […]

December 4, 2018December 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

WeTek Air Android TV 4K HDR Set-Top Box Comes with DVB-T2/C, DVB-S2 or ATSC Tuners

WeTek was one of the first manufacturers to launch Android set-top boxes with built-in tuners starting with WeTek Play, later followed by WeTek Play 2 model a few years later. In recent years, the company also introduced other Android media devices for the business sector with WeTek Hyperion 4G LTE Android TV TV box, and WeTek Nix with all DRM required for the IPTV market. But it appears WeTek is coming back to the consumer market with their Google certified WeTek Air TV box running Android TV, and equipped with DVB-T2/T/C (Europe), ATSC (US), or DVB-S2 (Worldwide) tuner. WeTek Air hardware specifications are pretty similar to their WeTek Play 2 model, but with various improved features thanks to a new processor: SoC – Quad core Arm processor (Likely S905D, TBC) System Memory – 2 GB DDR4 Storage – 16 GB eMMC flash + micro SD card slot Video & Audio […]

January 12, 2018January 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

WeTek Unveils Hyperion 4G LTE Set-Top Box & Nix OTT TV Box Running Android TV OS

When Geniatech announced Android TV certification for their ATV598Max set-top box with digital TV tuners compliant with DVB-T2, DVB-C, ATSC, or ISDB standards earlier this week, we noticed how few official Android TV STB there was on the market. But more may be coming, as Wetek will showcase two Android TV products at CABSAT in Dubai on January 14-16 with Wetek Hyperion Amlogic S905D 4G LTE set-top box, as well as WeTek Nix OTT box powered by Amlogic S905X processor. WeTek Hyperion Specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 SoC up to 1.5 GHz, with penta-core ARM Mali-450 GPU System Memory – 2GB DDR3 RAM Storage – 16GB eMMC 5.0 flash Video & Audio Output – HDMI 2.0a (CEC, HDR, HDCP 1.4/2.2), mini jack analog AV output Connectivity Gigabit Ethernet Dual band 802.11 ac/b/g/n WiFi (optional 802.11ac MiMo) Bluetooth 4.0 4G LTE modem – LTE-FDD: B2/B4/B5/B12/B13/B17/B25/B26; LTE-TDD: B41; […]

June 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

WeTek and Ugoos Release Android 6.0 Marshmallow Firmware for their Amlogic S905 TV Boxes

While there are many models of TV boxes on the market, there are only a few companies that will provide firmware updates over time for their products. Two of those companies are WeTek and Ugoos, both of which recently released Android 6.0 Marshmallow firmware for their Amlogic S905 TV boxes. I actually reported about WeTek working on Android 6.0 for Hub TV box last year, but at the time it was still a beta version. The company has now released weOS 3.1 firmware with Android 6.0 for both WeTek Hub and WeTek Play 2 with the following changelog: System Kernel Fixes Streaming apps in 4K Improved Auto refresh rate system for Kodi Improved DRM playback Apps Added Kodi 17.3, update Updted Aptoide Store, Google Apps and File Manager WeTV (Play 2 only) Added XMLTV for Sat PG Fixes for ATSC Now allows ATSC-T and ATSC-C Most people can get the […]

April 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

OpenELEC 8.0 Released with WeTek Play 2 & Hub, and Raspberry Pi Zero W Support

In recent months, I’ve written more about LibreELEC, a fork of OpenELEC, but the latter project is still being worked on, and OpenELEC 8.0 has been released adding builds for WeTek Play 2 & WeTek Hub TV boxes, as well as Raspberry Pi Zero W board, and upgrading to Kodi 17.1. and newer packages such as Linux 4.9 and ffmpeg 3.2. The developers also removed some unused or dropped features such as HFS and HFS+ filesystem, iSCSI, NFS/NBD/iSCSI network boot, and LIRC. X11 AMDGPU, ATI (Radeon) and Intel GPU driver driver has been replaced by X11 Modesettings GPU driver. They also updated some drivers & firmware files for WLAN and DVB, as well as update Nvidia Legacy driver to xf86-video-nvidia-340 (VDPAU only supported now). You can download or update OpenELEC 8.0, not only for the new WeTek and Raspberry Pi platforms, but for also x86 64-bit images for Intel & […]

March 6, 2017 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Mainline Linux on 64-bit ARM Amlogic SoCs, and TV Boxes such as Wetek Hub / Player 2, NEXBOX A1 / A95X, etc…

We’ve already seen Neil Armstrong, part of BayLibre, worked on adding Amlogic SoC (S905/S905X/S912) to mainline Linux via our virtual schedule for the Embedded Linux Conference & OpenIoT Summit 2017. But at the time, although we could see some activity in Linux 4.10 including support for Nexbox A95X and Nexbox A1, they did provide that much details the work that had been done, but since then, ELC 2017 videos have been released, and BayLibre wrote a short post about 3D Graphics support in mainline Linux. We can see that I/Os, USB host, composite video output, Ethernet, eMMC/SDIO, and PSCI and SCPI features have already been added to Linux 4.10. but some important features have not yet including HDMI, Mali support, Audio, and high speed eMMC modes. HDMI is actually planned for Linux 4.12, which could be released in about 18 weeks if we keep the 10 weeks kernel release schedule […]