wearables News - Page 12 of 27 - CNX Software

November 19, 2019 by Ayo Ayibiowu - 8 Comments

Bangle.js is an Hackable, Open Source JavaScript and TensorFlow-driven Smartwatch (Crowdfunding)

Espruino brought JavasScript to the Microcontroller, now Bangle.js is bringing Javascript plus TensorFlow Lite to your smartwatch. There has been some movement by some developers that says that JavaScript should be used for everything, even though I find that idea ridiculous, I still find JavaScript a fascinating language. The NeaForm Research team and Gordon Williams (the brain behind Espruino) have all teamed up in launching Bangle.js Smartwatch. Bangle.js isn’t your ordinary smartwatch, at the heart of it is the open-source ecosystem. JavaScript plus TensorFlow Lite and of course, a cool looking Smartwatch is what Bangle.js is offering. Bangle.js was launched at the recently concluded NodeConf EU conference, and the goal is to bootstrap an Open Health Platform hopefully. NodeWatch is the specific implementation of Bangle.js for NodeConf EU 2019, co-developed by Espruino and NearForm Research. This project has the potential to bootstrap a community-driven open health platform where anyone can […]

October 22, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Imagination iEW220 Low Power Dual-band 802.11n WiFi IP Solution Targets IoT, Automation and Wearables

Imagination-low-power dual-band WiFi IP solution

Imagination Technologies is better known for their PowetVR GPUs and as the previous owner of MIPS technology, but they do have other products as well and the company just announced their second generation 802.11n WiFi IP designed for low power applications Ensigma iEW220 is an IEEE 802.11a/b/g/n 1X1 SISO Wi-Fi IP solution comprised of RF, baseband and MAC, and supporting both 2.4GHz and 5GHz spectrum. iEW220 specifications: RF Features Dual-band 2.4 and 5 GHz RF including PA Power efficient AGC Optimized PLL power consumption Customized PA to minimize Tx power consumption Power optimized DAC/ADC design Integrated transmit/receive switch for RF Single pin RF antenna interface IEEE 802.11 PHY Support (2.4/5 GHz) IEEE 802.11b DSSS/CCK (up to 11 Mbps) IEEE 802.11a/g OFDM (up to 54 Mbps) IEEE 802.11n OFDM MCS 0-7, (20/40 MHz channels, up to 72.2/150 Mbps) Station, soft AP and Wi-Fi direct with up to four associated devices Tx […]

September 25, 2019September 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

PineTime Smartwatch Specifications Released, Availability Scheduled for H1 2020

PineTime Charging Cradle & Heart Monitor

A couple of weeks ago, we covered PineTime smartwatch for PinePhone Linux smartphone that should be launched next year for around $25. At the time we had limited information from a Tweet as well as information provided by TL Lim, founder of Pine64 community, such as the watch would be based on Nordic Semi nRF52832 or nRF52840 multi-protocol WiSoC. But we now have much more details about specs and other details can be found in the Wiki. PineTime specifications: SoC (undecided, one or the other. See differences between nRF52832 and nRF52840 for details) Nordic Semiconductor nRF52832 Arm Cortex-M4F MCU @ 64 MHz with 512KB Flash, 64KB SRAM, Bluetooth 5 (no long range) Nordic Semiconductor nRF52840 Arm Cortex-M4F MCU with 1MB flash, 256KB flash, Bluetooth 5 (long range), 802.15.4 (e.g. for Zigbee), Arm Trustzone, etc… Storage – 8MB SPI NOR Flash (final product may use 16MB flash instead) Display – 1.3″ […]

September 24, 2019October 7, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Energous Launches WattUp Hearables Developer Kit with Near-Field Wireless Charging

We previously wrote about Energous WattUp near, mid, and far-field wireless charging while covering SKIIN smart underwears that could be recharged using WattUp near-field wireless technology, but the technology inside can also support future on the desk (mid-field) or in the room (far-field) charging. The company has now introduced the WattUp hearables developer kit that sadly still does not seem to support mid- and far-field charging yet but provides everything to manufacturers to get started with wireless charging for Bluetooth earbuds, smart headphones, and similar gadgets. The kit offers all hardware and software resource to get started with developing wirelessly charged audio devices: Transmitter reference design with power supply, based on Dialog Semi DA14680 Bluetooth LE chip, DA4100 wireless power transmitter, as well as EN3921 and EN3913M front end ICs. Receiver reference design with DA2223 RF to DC receiver and DA14585 Bluetooth LE SoC Mobile app Reference design user guide […]

September 15, 2019September 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PineTime is a $25 Smartwatch / Companion for PinePhone Linux Phone

We’ve recently seen Linux smartphones are coming in a few weeks or months, but the $150 PinePhone may not come alone, and soon be joined by a $25 companion, namely PineTime smartwatch. That’s what we learned through a tweet by Pine64 explaining the PineTime is a Linux smartphone companion that can run FreeRTOS or Arm Mbed operating systems. It will be a side-project however, and the focus is still on PinePhone and Pinebook Pro, meaning it will take a while depending on the level of community engagement. Available information is limited to the discussion in the tweet at this stage, but we do know the watch will be made of zinc alloy & plastic, come with a charging dock, a 20 mm wristband, an heart-rate monitor and last several days on a charge. We’ve also seen people interested in porting ZephyrOS to the watch, and others would like to make […]

August 28, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AndesCore N22 RISC-V Core Supports RV32IMAC or RV32EMAC Instruction Sets

We covered Gigadevice GD32V general-purpose microcontroller with a RISC-V “Bumblebee” core last week, and I was informed that Andes Technology had recently introduced AndesCore N22 RISC-V “Bumblebee” IP core capable of supporting either RV32IMAC or RV32EMAC instruction sets. A web search did not reveal any specific information about what “Bumblebee” RISC-V cores are exactly, or maybe it’s in reference that many can be coupled in parallel. But that’s just a small detail, let’s check out in some details what AndesCore N22 core has to offer. The RISC-V core is designed for entry-level MCUs found in IoT devices and wearables, and is capable of deeply embedded protocol processing for I/O control, storage, networking, AI and AR/VR. Highlights of AndesCore N22: AndeStar V5 (RV32IMAC) / V5e (RV32EMAC) Instruction Set Architecture (ISA), compliant to RISC-V technology plus Andes extensions architectured for performance and functionality enhancements 32-bit, 2-stage pipeline CPU architecture 16/32-bit mixable instruction […]

May 21, 2019May 21, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Google Glass Enterprise Edition v2 Features Snapdragon XR1 Processor

To be honest, I was pretty happy when it was clear that smart glasses for the consumer market would not take off, and I would be living in a better, smart glasses-free, world. But I also reckoned that those could have use in professional settings, and Google Glass Enterprise edition was first spotted in 2015 with an Atom processor. The company has now launched an upgraded model with Google Glass Enterprise Edition v2 powered by Qualcomm Snapdragon XR1 eXtended reality (XR) platform. Google Glass Enterprise Edition v2 specifications: SoC – Qualcomm Snapdragon XR1 quad-core Kryo processor @ 1.7GHz with Adreno GPU, Qualcomm AI Engine for on-device processing; 10nm manufacturing process System Memory – 3GB LPDDR4 Storage – 32GB eMMC flash storage Display – 640×360 Optical Display Module Audio out – Mono Speaker, USB audio, BT audio Microphones – 3 beam-forming microphones Camera – 8MP, 80 DFOV Connectivity – Wi-Fi 5 […]

December 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Omron HeartGuide Wearable Blood Pressure Monitor is Finally Available

Way back at CES 2016, Omron showcased Project Zero BP6000 wearable blood pressure monitor that was meant to be an FDA approved blood pressure monitor fitting into a watch form factor and starting to sell for $200 at the end of 2016. But the device was not particularly eye-pleasing and FDA approval is really hard, so they unveiled the thinner and prettier Project Zero 2.0 model the next year at CES 2017 with the goal of releasing the device sometimes in 2018 for $300. The good is that the product – now called HeartGuide – will up for pre-order, and slated to ship in January 2019. Sadly, the cost has gone way up since it now sells for $499, and will only ship to a US address. HeartGuide (BP8000-M) wearable blood pressure monitor technical specifications: Display – Transflective memory-in-pixel LCD Memory – Blood pressure measurement up to 100 times, activity […]