waveshare News - Page 10 of 11 - CNX Software

April 26, 2021April 26, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Quad GPIO Expander for Raspberry Pi Pico adds battery, display module, sensors, etc…

Raspberry Pi Pico with OLED display, 18650 battery

People are normally using MCU boards for their low cost, low-power consumption, low price and/or real-time ability. The Raspberry Pi Pico is no exception, but if you don’t care about using a large board, Waveshare created a 177 x 62 mm “expander” board for the Raspberry Pi Pico that can take four modules. The company’s Quad GPIO Expander board includes a set of female headers for RPi Pico, and four sets of 2×20 male headers for extra modules that bring support for 14500 batteries, OLED displays, RTC, relays, and other compatible modules. The expansion board also has a Micro USB port for power, and to leave the Micro USB OTG port on the Raspberry Pi Pico for other purposes. Each header pin is clearly labeled, which could be useful if using some of the pins with jumper wires instead of modules. Waveshare has hundreds of different modules and somehow decided […]

December 11, 2020December 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Raspberry Pi CM3 “Industrial IoT” baseboard features PoE, 4G LTE modem, and isolated I/Os

The Raspberry Pi Computer Module 4 (CM4) may have been introduced in October, but that does not mean people have stopped all development on Raspberry Pi CM3/CM3+ hardware, and Waveshare has just launched a carrier board for the module with PoE support and a 4G LTE modem namely Simcom SIM7600G-H module with 3G and 2G fallback. The board also offers Ethernet and WiFi connectivity, HDMI and MIPI CSI/DSI video interfaces, multiple USB ports, as well as isolated CAN bus, RS485, RS232, and other I/Os for industrial applications. Compute Module PoE 4G board specifications: Storage – MicroSD card slot for Raspberry Pi CM3 Lite / CM3+ Lite modules Video Output – HDMI 2.0 port, MIPI DSI connector compatible with the official Raspberry Pi display Audio – 3.5mm stereo audio jack, 4-pin speaker connector for 8Ω/5W speaker Camera I/F – 2x independent MIPI CSI ports Connectivity 10/100M Ethernet RJ45 port with PoE […]

November 24, 2020November 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Raspberry Pi 400 kit ships with 7-inch or 13.3-inch touchscreen display

The Raspberry Pi Foundation has recently launched the Raspberry Pi 4 keyboard computer with impressive performance thanks to a well-designed cooling solution, and I think it’s a great tool for kids (and adults) who may want to carry a Raspberry Pi around. However, you’d still need a display in each location, so until the foundation releases the Raspberry Pi 4000 laptop next year (full disclose: I made that up!), it might be cool to have a portable display coming with the keyboard PC. That’s what Waveshare is offering with two kits combining a Raspberry Pi 400 together with a 7-inch or 13.3-inch HDMI touchscreen display and other accessories. Not quite as portable as a laptop but it gets close. Here’s the full list of accessories in the kits: Raspberry Pi 400 Kit with keyboard PC with UK keyboard (sadly the only layout option for now), power supply, HDMI cable, preloaded […]

October 16, 2020October 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Raspberry Pi Gets 5G Cellular Connectivity with Snapdragon X55 Powered HAT

The Raspberry Pi board has long been able to connect to cellular networks either via USB dongles or 3G or 4G LTE HATs that often include GPS as a bonus. But you can now connect your Raspberry Pi 4 or other RPI SBC with a 40-pin header to 5G networks thanks to Waveshare SIM8200EA-M2 5G HAT for Raspberry Pi powered by Qualcomm Snapdragon X55 multi-mode multi-band modem offering 5G/4G/3G cellular connectivity. As we can see from the photo, the 5G add-on comes as part of a cool-looking kit with bottom and top acrylic plates, spacers, a cooling fan plus five antennas for cellular and GNSS connectivity. But the HAT itself integrates a SimCOM SIM8200EA-M2 M.2 module and offers the following specifications: Compatibility – Works with Raspberry Pi boards with a 40-pin GPIO extension header Cellular Connectivity SIM8200EA-M2 core module based on Qualcomm Snapdragon X55 platform with multi-mode multi-band support 5G/4G/3G […]

July 20, 2020July 20, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Waveshare Launches an Affordable 7-Color e-Paper Display

Most e-paper displays are black or white with sometimes red or yellow color being added to the mix. But E-Ink has recently launched several color e-Paper display at prices that will not make it affordable to most projects. Waveshare has launched its fair share of e-Paper displays in the past, and now the company is coming with a relatively affordable 5.65″ color e-Paper display with seven different colors for $74.99 plus shipping. Main features and specifications: Display 5.65″ display (114.9 × 85.8mm) Resolution – 600 × 448 pixels Viewing angle – >170° ACeP (Advanced Color ePaper) 7-color with black, white, green, blue, red, yellow, and orange Greyscale – 2 levels Full refresh time – 15s Dot pitch – 0.1915 × 0.1915mm Host Interface – 3-wire SPI or 4-wire SPI Operating voltage – 3.3V/5V Power Consumption 50mW (typ.) during refresh Standby current – <0.01uA (almost none) Dimensions – Board – 138.5 […]

May 6, 2020May 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

HART-IP Developer Kit Leverages Raspberry Pi 3B+, Off-the-Shelf Add-on Boards for Industrial Field Communication

Have you ever heard about the bi-directional HART communication protocol? I haven’t, but I should probably have as there’s an installed base of over 40 million HART-enabled instruments according to FieldComm Group who owns the protocol and the organization is comprised of 375 corporate members working on process automation instrumentation, systems, and services. HART stands for Highway Addressable Remote Transducer. The organization is also maintaining the more recent (2009) HART-IP IP-enabled version of the HART field communication protocol and just launched HART-IP Developer Kit whose hardware is comprised of a Raspberry Pi 3B+ SBC and off-the-shelf add-on boards mounted on a DIN Rail mount. List of all hardware components: Raspberry Pi 3B+ SBC DSLRKIT Power Over Ethernet PoE HAT (around $20 on Aliexpress) Waveshare Raspberry Pi High-Precision AD/DA (about $30) DINrPlate DIN Rail Mount. MicroSD card On the software side, the system runs Ubuntu MATE 18.04 64-bit preloaded on the MicroSD […]

May 4, 2020September 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Argon One Case Brings All Raspberry Pi 4 Connectors on One Side

Due to its small size, the Raspberry Pi 4 board has Ethernet and USB ports on one side, and micro HDMI ports, AV port, and USB-C port on another side. This may not be an issue for most people, but having all ports on one side may make cable management easier. Argon One case for Raspberry Pi 4 makes that feat possible thanks to an adapter board that brings HDMI and AV ports on the left side of the USB ports, and an extra power expansion board does the same for the USB-C port plus adds a power button. Argon One comes in a kit with the following components: Aluminum top cover, black bottom AR1 power board AR1 AV board with micro HDMI inputs and outputs, AV port input and output Fan Power button Thermal pads for the processor and memory chip for passive cooling via internal heatsinks built into […]

March 17, 2020March 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

4.2″ and 7.5″ NFC-powered e-Paper Displays Work without Battery

e-Paper displays have great readability under sunlight, and only consume power when updated. But their refresh rate is limited, and most displays are fairly expensive. One way to reduce the cost is to completely remove the battery from the display, and update it through NFC providing both data and power. I’ve just found out about that possibility through 4.2″ and 7.5″ displays offered by Waveshare. All you need is a compatible NFC smartphone, or the company’s ST25R3911B NFC Board to power the display and transfer your image of choice. This works best for signs you may need to infrequently update such as menus, daily schedules, conference badges, labels, etc… Waveshare NFC-powered e-Paper display key features and specifications: Screens 7.5″ display 800×480 resolution 2-level greyscale 170° viewing angle Refresh Time – 5s + data transfer time 4.2″ display 400×300 resolution 2-level greyscale 170° viewing angle Refresh Time – 4s + data […]