vp9 News - Page 8 of 23 - CNX Software

July 12, 2017July 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Xnano X5 4K TV Box with Gigabit Ethernet, HDMI Input, USB 3.0, and SATA Goes for $68 and Up

Realtek RTD1295 processor allows for 4K TV boxes with DVR and PiP function through HDMI input, and USB 3.0 and SATA 3.0 storage interfaces. I previously reviewed Zidoo X9S and EWEAT R9 Plus based on the solution, and I especially liked support with NAS function through OpenWrt running side-by-side with Android 6.0. Those are high-end devices that cost well over $100, but we’ve recently seen cheaper models, likely with less refined firmware, no metal case, and possibly lacking OpenWrt that go as low as $78 shipped with LAKE I Home Cloud TV box. We can now get an even cheaper model, albeit with just 1GB RAM and 8GB flash, thanks to Xano X5 sold for $68.32 including shipping on Aliexpress. There’s also a 2GB/16GB version on the same page going for $82.76. Xnano X5 Smart Box specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 […]

July 6, 2017July 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Vorke Z3 Rockchip RK3399 TV Box Review – Part 2: Android 6.0 Firmware

Vorke Z3 is another mini PC / TV box powered by Rockchip RK3399 hexa core processor with two Cortex A72 cores, and two Cortex A53 cores making it theoretically one of the fastest TV boxes on the market, excluding NVIDIA Shield Android TV which is well ahead of the competition, albeit with poor worldwide availability. I’ve have already shown Vorke Z3 hardware inside out, so in the second part of the review, I’ll focus on testing the firmware including video playback, and the system performance, and see how it compares to the similar Yundoo Y8, which I reviewed last month. First Boot, Setup, and First Impressions One the selling point of Vorke Z3 is its SATA connector, so I connected a 1TB 3.5″ SATA drive first, as well as Seagate USB 3.0 drive (1TB) to the USB 3.0 port, I also added a USB hub to connect a USB keyboard, […]

June 26, 2017July 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

A95X R2 TV Box Review – Part 2: Android 7.1, Video & Audio Tests, and Benchmarks

In the first part of A95X R2 Rockchip RK3328 TV box review, I listed the specifications of the device, took a few photos, and reported about the chip used in the PCBA. I’ve now had time to play with the box, so I can report about my experience with Android 7.1, video & audio capabilities, and the performance of the device in the second part of the review. First Boot, Setup, and First Impressions I connected a USB 3.0 hard drive to the USB 3.0 port of the box, a USB keyboard to one of the USB port to take screenshots, and a USB hub with the RF dongles for my air mouse and gamepad in the remaining USB 2.0 port. I completed the hardware setup with Ethernet and HDMI cables, as well as the power supply. I then pressed the power button on the unit to start it up, […]

June 22, 2017 by Steven - 5 Comments

THL Box 1 Pro TV Box Review – Part 1: Unboxing and Teardown

Today we will be taking a look at the THL Box1 Pro box. We will take this is two parts, first being the unboxing and teardown then software and performance. Let’s start with the unit’s specs. THL Box 1 Pro TV Box specifications CPU – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.51GHz GPU – Penta-core Mali-450MP GPU @ 750 MHz Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD card slot (up to 32GB) Video Output – HDMI 2.0 up to 4K @ 60 fps, AV port Audio – HDMI, AV port (stereo audio) Video Codecs – VP9 4K @60fps, 10-bit H.265 4K @ 60 fps, H.264 4K @ 30 fps and more Connectivity – 10/100M Ethernet, 802.11 b/g/n/ac Dual Band Wi-Fi, and Bluetooth 4.0 Interfaces – HDMI port, RJ45 port (100Mbps Ethernet), 2x USB Host, micro SD Card Slot, AV Out, DC jack […]

June 16, 2017November 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Zidoo X7 RK3328 TV Box to Sell for $69 with Android 7.1

Rockchip RK3328 processor has been getting some attention recently with low cost RK3328 TV boxes, Pine64’s ROCK64 development board, and now Zidoo has announced they are working on their X7 TV box with slightly better specifications and a product that should get better support than the cheaper models. Zidoo X7 specifications: SoC – Rockchip RK3328 quad core Cortex A53processor @ 1.5 GHz with Mali-450MP2 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC flash + micro SD slot Video Output – HDMI 2.0a port up to 4K @ 60 Hz with HDR support + 3.5mm AV port (composite video) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Video Codecs – H.264/AVC Base/Main/High/High10 profile @ level 5.1; up to 4Kx2K @ 60fps H.265/HEVE Main/Main10 profile @ level 5.1 High-tier; up to 4Kx2K @60fps VP9, up to 4Kx2K @ 60fps Connectivity – 10/100M Ethernet, dual band 802.11ac WiFi and […]

June 7, 2017June 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Realtek RTD1296 STB/Media NAS SoC Coming Soon with Multiple Ethernet Ports, Dual SATA, HDMI 2.0 Input and Output

I have reviewed several Realtek RTD1295 TV boxes with NAS and HDMI input functions such as Zidoo X9S and EWEAT R9 Plus, and those were quite capable devices with a rich feature set, but Realtek has been working on a new higher-end RTD1296 SoC for quite some time. It comes with the same CPU and GPU, but has a larger package with more peripheral interfaces. I received the screenshot above last December, but the information does not seem to have changed since then. Realtek RTD1296 is equipped with a quad core Cortex A53 processor, an ARM Mali-T820MP3 GPU, and the same H.265/VP9 video engine as RTD1295. However, the new SoC adds one extra RGMII (Gigabit Ethernet) interface, one more USB 3.0 port, one extra SATA interface, and offers higher DDR bandwidth. The PCIe interface would also allow you to use more than just two SATA drives. Charbax got in touch […]

June 6, 2017July 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

U5PVR Deluxe Set-Top Box & NAS Review – Part 2: Android TV, Debian, and Live TV App

U5PVR Deluxe is an set-top box with digital TV tuners that runs Android TV 5.1, and support 2.5″ and 3.5″ hard drive. I’ve received a model with a dual DVB-T/T2 tuner, and already posted “U5 PVR Deluxe Android Set-Top Box Review – Part 1: Specs, Unboxing, Teardown, and SATA HDD Assembly” a few weeks ago, where I described the hardware, and I inserted a one terabytes 3.5″ hard drive. I’ve now had time to test the device, but it took much longer than expected due to a partial firmware update issue, which forced me to redo many of the tests. There are also some undocumented features, so if you want to make the most of the device, be prepared to spend time in the forums. U5PVR Connections, OTA Firmware Update, and Setup Wizard The box have one USB 3.0 ports, and three USB 2.0 ports, so most people won’t need […]

June 6, 2017July 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Review of Vorke Z3 Android Mini PC with SATA – Part 1: Unboxing & Teardown

After Yundoo Y8 review, I’ve received another Rockchip RK3399 mini PC for review: Vorke Z3, which was sent to me by GeekBuying. Both devices are quite similar for Vorke Z3 adds an external SATA interface, and two external high-gain antennas. I was also expecting Android 7.1 Nougat on Z3, but I’ve been told the current SDK has too many bugs, so the device still ships with Android 6.0.1. I’ll start the review by looking into the hardware inside out, before reporting on my experience with the firmware in the second part in a few weeks. Vorke Z3 Unboxing The retail package is quite bland, but most people will probably not care a bit about this little detail. The devices ships with a 12V/2A power supply, a simple IR remote control, a HDMI cable, a SATA cable, and Vorke Z3 “4K media player” user manual. The device feels of good quality […]