vp9 News - Page 19 of 23 - CNX Software

May 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Popcorn Hour A500 4K Linux Media Player Specifications, Unboxing, and Teardown

CloudMedia introduced Popcorn Hour A500 Pro last summer on Kickstarter, and as the company is about the ship rewards to backers, they has now recently introduced a lower cost version, called Popcorn Hour A500, based on the same processor but overall lower specs to bring the price down to $269. The company has sent me a review sample, so I’ll start by listing the hardware specifications, and post pictures of the device and its internals, before testing media playback capabilities later on. Popcorn Hour A500 Specifications The “non-PRO” version has less RAM, dropped the XLR connectors, and uses a cheaper audio DAC: SoC – Sigma Designs SMP8758 dual core ARM Cortex A9 processor @ 1.2 GHz with ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB DDR3 Storage – 512 MB SLC NAND Flash for firmware, 1x SD card reader, internal SATA bay for 2.5″ and 3.5″ […]

May 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

HiPo S905X Amlogic S905X Android TV Box is Available for Pre-order for $40 and Up

Amlogic S905X processor adds a few features over Amlogic S905 such as 4K VP9 hardware video decoding and HDR support, but thanks to better integration including built-in 10/100M PHY and audio codec, as well as support for 2-layer PCB, products with the new processor could potentially also be slightly cheaper, all other hardware specs being equal. We can now get a first idea of the price as one company has listed HiPo S905X TV box for pre-order on Aliexpress for $39.99 with 1GB RAM/8GB flash (Type 1), and $49.99 with 2GB RAM/16GB flash (Type 2). HiPo S905X (preliminary) specifications – Type 1 & Type 2 models: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB (Type 1) or 2 GB (Type 2) DDR3 Storage – 8GB (Type 1) or 16 GB (Type 2) eMMC flash + […]

May 20, 2016May 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Amlogic S905X Boards Showing Up for Eny Technology and Inphic TV Boxes

While NEXBOX A5 was the first Amlogic S905X TV box to be announced, it’s still not available, and others has started to show off their products such as Xiaomi Mi Box (US), and I got specs and pictures of boards for Inphic Spot i7 Pro and Eny TV box. Eny TV Box Board and Specifications That’s actually two boards before separation, and fitted with Amlogic S905X-H processors. If you look closely are the “silkscreen” however, you’ll find that it has been edited in a photo editor to add ENY_X_V0.93. I’m not quite sure why they felt they had to do this… Eny TV box specifications: SoC – Amlogic S905 or S905X-H quad core ARM Cortex-A53 @ up to 1.5GHz or 2.0 GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1 or 2GB DDR3 Storage – 8 or 16GB flash + micro SD card slot Video Output – […]

May 19, 2016May 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Xiaomi Mi Box Comes to the US with Android TV 6.0 Running on Amlogic S905X Processor

Xiaomi Mi Boxes have been available in China for a couple of years, and the only way to ship them to the rest of the world was to purchase via Chinese e-retailers. Xiaomi and Google have now worked together to bring Mi Box with Android TV 6.0, instead of the usual Chinese MIUI TV interface, to the US, and possibly to other countries. Xiaomi Mi Box (US) specifications: SoC – Amlogic S905X-H quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC flash Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDCP 2.2 and CEC support Audio Output – HDMI, optical S/PDIF and 3.5mm audio jack Video Codecs – VP9 Profile-2 & H.265 MP-10 up to 4K @ 60 fps, H.264 AVC up to 4K @ 30 fps, H.264 MVC up to […]

April 11, 2016April 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Zidoo X1 II 4K Android TV Box (Rockchip RK3229) Review

After skipping MXQ-4K TV box review due to severe issues with video playback, Zidoo X1 II is actually the first device powered by Rockchip RK3229 processor that I’ve fully tested. I’ve already taken pictures of the box, and opened it up to check the board in Zidoo X1 II unboxing and teardown post, and confirmed 4K videos could play pretty well from my USB hard drive using Zidoo Media Center after disabling Media Scanner process. So today, I’ll review other parts of the firmware, as well as video playback with ZDMC 16.0, Zidoo’s fork of Kodi 16.0. First Boot, Settings and First Impressions The device only has two USB ports, and I used one for a USB hard drive, and the other for RF dongles for MINIX NEO A2 Lite air mouse, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad via a USB hub. I also […]

April 10, 2016April 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Zidoo X9s Android 6.0 TV Box Features Realtek RTD1295 Processor with SATA 3.0, HDMI 2.0a Output and Input

Zidoo has been busy this year, after releasing Zidoo X5 and Zidoo X1 II in Q1 2016, the company is about to launch Zidoo X9s Android media recorder and player, successor of Zidoo X9, powered by Realtek RTD1295 quad core Cortex A53 processor, and be one of the first TV box to run Android 6.0. Zidoo X9s preliminary specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC + micro SD slot + SATA 3.0 interface (external?) Video I/O – HDMI 2.0a output, AV output, and HDMI input (recording and streaming up to 1080p @ 60 Hz) Audio I/O – HDMI in and out, 1x S/PDIF output Video Playback – HDR, 10-bit HEVC/H.265 up to 4K @ 60fps, H.264 up to 4K @ 24 fps, VP9 up to 4K @ 60 fps, BDISO/MKV, etc… automatic frame […]

April 6, 2016April 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S912 Processor Specifications

Amlogic plans to launch at least three new processors for OTT boxes and set-top boxes this year: Amlogic S905X, Amlogic S912, and Amlogic S905D. We already knew Amlogic S905 specifications, but I’ve recently received a document with some more details about Amlogic S912 revealing Mali-T820 GPU, a lack of USB 3.0 support, but still some interesting features such as HDMI 2.0a, 4K VP9, 10-bit H.265, Gigabit Ethernet Mac, and so on. Amlogic S912 specifications with highlights in bold showing differences with Amlogic S905X: CPU Sub-system – Octa core ARM Cortex-A53 CPU up to 2 GHz (DVFS) with two CPU clusters one optimized for high performance (big) and the other for low power (LITTLE) 3D Graphics Processing Unit –ARM Mali-T820MP3 GPU up to 750MHz (DVFS) with 3 shader engines supporting OpenGL ES 1.1/2.03.1, DirectX 11 FL9_3, OpenCL 1.1/1.2 full profile and RenderScript. 2.5D Graphics Processor – Fast bitblt engine with dual […]

March 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Unboxing and Teardown of Zidoo X1 II Android TV Box

MXQ-4K, the first Android TV box based on Rockchip RK3229 I received, was a massive disappointment to me as it was unusable to play 4K videos possibly due to CPU throttling and/or poorly optimized USB storage support. So I was eager to try another device based on the latest Rockchip media processor with support for 4K 10-bit H.265 and H.264 video playback, and Zidoo sent their Zidoo X1 II TV box for review on CNX Software. Today, I’ll start by checking the device and the hardware, before testing the firmware later on. Zidoo X1 II Unboxing I got the device by DHL in the usual Zidoo’s white and green package with some icons representing the key features: 4K, 3D, ZIUI user interface, WiFI, 10-bit HEVC… ZDMC is the custom version of Kodi developed by the company, and that makes Zidoo one of the rare companies to respect Kodi’s trademark. The […]