vp9 News - Page 16 of 23 - CNX Software

August 24, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

M12N Amlogic S912 Octa-core TV Box Review – Part 2: Android 6.0 Firmware

Shenzhen Shiningworth MXQ Plus M12N is one of the first TV box powered by Amlogic S912 octa-core processor also bringing a faster GPU, VP9 and HDR support compared to the earlier Amlogic S905 processor. I’ve already shown the device, its accesories, and its internal degisn in the first part of MXQ Plus M12N review, so today I’ll spend time reporting my finding testing features and performance with Android 6.0 firmware. Setup Wizard and First Impressions Since there are only two USB ports, I connected my USB hard drive to one, and used a USB hub to connect input devices including two RF dongles for an air mouse, and a gamepad, as well as a USB keyboard to take screenshots. I also added Ethernet and HDMI cable, and finally connected the power supply to boot it up. But as you can see from the picture the very first boot was not […]

August 22, 2016September 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

YOKATV KB2 Amlogic S912 TV Box Comes with 32GB Internal Storage

Most Android TV boxes now come with either 8 or 16GB, and in my experience it’s usually enough for most users. However, as we’ve seen recently, while not being as powerful as Nvidia Shield Android TV box, Amlogic S912 TV boxes are suitable for gaming, and games may use a lot of space, and for example a PSP street fighting game took 500 MB space when I tested it. So if you need more storage space, you may consider devices such as YOKATV KB2 that comes with 32GB eMMC flash. YOKATV KB2 specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-T820MP3 GPU @ up to 750MHz System Memory – 2GB DDR3 Storage – 32GB eMMC flash, micro SD slot up to 32GB Video Output – HDMI 2.0a with HDR, CEC and (maybe) HDCP 2.2 support + 3.5mm AV jack Audio Output – […]

August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Beelink GT1 Android TV Box Powered by Amlogic S912 Sells for $56 (Promo)

In a recent list of Amlogic S912 TV boxes we found out that factory prices ranged between $47 to $54 for typical devices with 2GB RAM and 16GB internal storage, but you can only get those price by buying in quantities, and they don’t include shipping. However, GearBest has just informed me they lowered Beelink GT1 prices to $55.99 shipped with GBGT1 coupon, which – provided the box works well – looks like a good bargain. Beelink GT1 specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash, micro SD slot up to 32GB Video Output – HDMI 2.0a Audio Output – HDMI and optical S/PDIF Connectivity – Gigabit Ethernet, WiFi 802.11 b/g/n/ac, and Bluetooth 4.0 USB – 2x USB 2.0 ports Misc – IR receiver Power Supply – […]

August 17, 2016August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Allwinner H5 is a Quad Core Cortex A53 Processor for 4K OTT TV Boxes

Last year, we found that Allwinner was preparing to launch Allwinner H64 and H5 quad and octa processors in their roadmap, but there have been some changes, and the compny seems to have dropped H64 name, and has now introduced Allwinner H5 quad core Cortex A53 processor designed for 4K TV boxes. Allwinner H5 main specifications: CPU – quad core Cortex A53 with NEON, FPU, 64KB I/D cache per core, and 512KB L2 cache 3G GPU – ARM Mali-450MP GPU with 4 pixel processor cores, and 2 geometry cores with support for OpenGL ES 2.0/1.1/1.1, OpenVG 1.1 and EGL 2D GPU (Graphics and Display Processor) – Dual display; Main display: 4 video layers, 12 graphics layers, 4 alpha blending channels; Auxiliary display: 4 video layers, 4 graphics layers, and 2 alpha blending channels Memory I/F – DDR3/3L SDRAM interface up to 32-bit data width Storage I/F – SPI NOR flash, […]

August 16, 2016August 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

SZTomato TVI Amlogic S905X Development Board to Support Android 6.0, OpenELEC 7.0, and Ubuntu 16.04

Shenzhen Tomato has been selling Android TV boxes for a few years now, but one of their next product will be a development board based on Amlogic S905X processor with 8GB flash, 2GB RAM, and the usual 40-pin Raspberry Pi header. SZTomato TVI development board specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (1GB or less as option) Storage – 8GB Samsung eMMC flash (other capacities as option) + micro SD slot Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz Connectivity – Fast Ethernet port, 802.11 b/g/n WiFi and Bluetooth 4.0 (Ampak AP6212) with IPEX connector USB – 2x USB 2.0 host ports with 500mA fuses, 1x USB type C port for power and USB devices (no video) Expansion header – 40-pin Raspberry Pi compatible header with USB, […]

August 15, 2016August 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

4K VP9, H.265 and H.264 Video Playback in Amlogic S912 M12N TV Box

I’ve received my first Amlogic S912 TV box with MXQ Plus M12N TV box this week-end, and I’ve decided to start testing by showing the media capabilities of the platform that is supposed to support 4K VP9 up to 60Hz, 4K 10-bit H.265 up to 60Hz and 4K H.264 up to 30 Hz. I connected the device to Onkyo TX-NR636 A/V recevier itself connected to LG 42UB820T 4K UHD TV, set video output to 2160p @ 60Hz, and played several 4K video samples from a USB hard drive using the pre-installed version of Kodi 16.1: 4K Hawaii Sunset _ GoPro Hero 4 Black [email protected] (Downloaded from YouTube) – OK Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video a bit choppy, large audio delay. Expected […]

August 5, 2016May 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 120 Comments

NEXBOX A95X (Amlogic S905X) TV Box Review – Part 2: Android 6.0 and Kodi 16.1

Last week I publish the first complete review of an Amlogic S905X device with MINI M8S II TV box review, and while the device work in a smooth and stable manner, some features did not work as expect such as HDMI audio pass-through. I’ve now had the change to compare it to another S905X with NEXBOX A95X, not to confuse with its “homonym”: NEXBOX A95X with Amlogic S905 processor. I’ve already taken pictures of the device and accessories, and checked out the hardware in the first part of the review, so today, I’ll report my finding playing with Android 6.0 firmware, Kodi video and audio capabilities, and check whether bugs and issues found on MINI M8S II are also present in the device. First Boot, Settings and First Impressions NEXBOX A95X is really a tiny device, so it’s no surprise that it only comes with two USB 2.0 ports, and […]

August 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 74 Comments

R-BOX Pro Octa-core Android TV Box Comes with 3GB RAM, Pre-sells for $83

The vast majority of TV boxes on the market only come with 1 or 2GB RAM, although some Rockchip RK3288 based devices ship with up to 4GB RAM, such as Nagrace HPH NT-V6, but so far the maximum I could see only 64-bit ARM platforms was 2GB RAM. R-BOX Pro changes that with an Amlogic S912 processor with 2 or 3GB RAM and 16GB flash. R-BOX Pro specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2 or 3 GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB Video Output – HDMI 2.0a with HDR and CEC support up to 4K @ 60 fps, and AV port for composite output Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Video codecs – VP9-10 profile 2 up to 4K @ […]