vp9 News - Page 15 of 23 - CNX Software

September 18, 2016November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Qintaix Q912 Android Box Review – Part 2: Android 6.0, Kodi 17, Benchmarks, etc…

Qintaix Q912 is one of the many octa-core Android boxes based on Amlogic S912 processor. I’ve already shown photos of the device and its internal design in the first part of Qintaix Q912 review, so today I’ll report the results of my testing with Android firmware, video & audio capabilities in Kodi 17 Alpha 3 (pre-installed), features supports, benchmarks, and other comment. I will also be interesting to find out how it compares to M12N TV box, also based on Amlogic S912 processor. First Boot, Settings, and First Impressions I’ve connected all necessary cables including HDMI and Ethernet, added some USB devices including two 2.4 GHZ USB dongles for my air moues and wireless gamepad, a USB keyboard to take screenshots, and a USB 3.0 hard drive to the USB 2.0 ports of the device. Once you apply power, the LED is turn red, and you need to press the […]

September 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Kodi 17 Setup and Audio/Video Support in Amlogic S912 TV Boxes (as of September 2016)

Most people installing Kodi are going to select Kodi 16.1 as of today, since it is the latest stable release. But I’m currently reviewing Qintaix Q912 TV box based on Amlogic S912 octa-core processor, whose Android 6.0 firmware includes Kodi 17 Alpha 3, so since that’s the first time I run Kodi 17 “Krypton”. I’ve decided to report my experience about the interface, and the current status about audio and video support by testing some 4K videos, and audio files. I used the latest available firmware for the test. Kodi 17 can be found on the main launcher, and for the first launch, we’ll see the default skin has been replaced from Confluence to the new Estuary skin. It’s a little confusing a first. We can access the setup menu by going to the icon on the bottom left, just on the right on the power button, and then select […]

September 12, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Hisilicon Hi3798M V200 SoC to Allow for Cheaper 4K TV Boxes with Gigabit Ethernet, SATA, and/or USB 3.0

One year after Hisilicon Hi3798C V200 processor was unveiled at IBC 2015, Hisilicon has now introduced a cost down version named Hisilicon Hi3798M V200 at IBC 2016 with a lower-end Mali-450 GPU, only 2 TS input interfaces, one less USB 3.0 interface, and only 1x GMAC (Gigabit Ethernet MAC) or 1x Fast Ethernet PHY, instead of two GMAC interfaces. The processor also adds 1080p30 H.265 video encoding. Hisilicon Hi3798M V200 key features: CPU – Quad core Cortex A53 processor (15K DMIPS) GPU – ARM Mali-450 + Hisilicon dual-core GPU Memory I/F – 32-bit DDR3/3L/4 Storage I/F – eMMC/NAND/SPI, 1x SATA 3.0, 2x SDIO Video Engine (VPU) HiVXE 2.0 video engine supporting 4Kp60 10-bit H.265 and VP9 decoding, 4Kp30 H.264, MPEG-2, MPEG-4, VC1, VP6/VP8, Real Media 8/9/10 Encoder – H.264/H.265 @ 1080p30 or dual 720p30 Imprex 2.0 processing engine with support for HDR10 & HLG high dynamic range, BT.709/BT.2020, etc.. Peripherals: […]

September 9, 2016October 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Beelink GT1 4K TV Box Review – Part 1: Unboxing and Teardown

Beelink GT1 is among the cheapest Amlogic S912 TV boxes available today, selling for around $56, but despite the inexpensive price tag, its specifications are not too bad with Gigabit Ethernet, 802.11ac WiFi, 2GB RAM, 16GB flash, and 4K H.265 & VP9 video capabilities. The company sent me a sample for review, and as usual, I’ll start by posting photos, and having a look at the hardware design, before reviewing the firmware in more details in a the second part of the review. Beelink GT1 Unboxing My package appears to have had a rough trip, but apart from the edges of the black retail package nothing was damaged. The main specifications are shown on the bottom of the package together with CE and FCC certifications, and the type of power adapter inside the package. GT1 ships with a simple IR remote control, a shortish HDMI cable (~1 meter), a small […]

September 7, 2016October 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Zidoo X9S (Realtek RTD1295) Android TV Box Review – Part 1: Unboxing and Teardown

Zidoo X9S is one of the first Realtek RTD1295 based TV boxes coming to market, and it has some pretty special features like running both Android 6.0 and OpenWrt simultaneously, HDMI input support for video recording and PiP, an external SATA interface, 4K media capabilities including HDMI 2.0a output, 4K 60 fps H.265 and VP9 & 4K 24 Hz H.264 video decoding, as well as HDR and 3D support. You can find the full Zidoo X9S specification in my previous post. The company has now sent me an early review sample, and in the first part of the review you’ll post photos of the devices and accessories, and perform a teardown to find out more about the electronics and thermal design. Later on I’ll publish articles with benchmarks, video performance, and the complete review. Zidoo X9S Unboxing The box comes in a light green retail package showing some of the […]

September 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

T95Z Plus is an Hexagonal Amlogic S912 TV Box with a Front LCD Display

T95Z Plus is an Amlogic S912 TV box with the typical 2GB RAM and 16GB storage combination, but it differentiates itself with an hexagonal case, a front panel LCD display, and what looks like an RGB LED band around the case. T95Z Plus specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV, and optical S/PDIF Video codecs – VP9 profile 2 up to 4K @ 60 fps, H.265/HEVC MP-10@L5.1 up to 4K 60fps, H.264 AVC up to 4K @ 30 fps, H.264 MVC up to 1080p60, MPEG-4, WMV/VC-1 SP/MP/AP, AVS-P16(AVS+)/AVS-P2 JiZhun Profile, MPEG-2 MP/HL, MPEG-1 MP/HL, and RealVIDEO 8/9/10 all up to 1080p60 Audio codecs – MP3, WMA, AAC, RM, FLAC, Ogg, TrueHD, DTS, […]

September 1, 2016September 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

MK809IV PRO / Eachlink IX809 PRO Amlogic S905X Android TV Stick Sells for $32

Amlogic S905X Android TV boxes are now pretty common, but if you’re looking for a device in TV stick form factor that’s more difficult to find, and exactly what Eachlink IX809 PRO devices offers with Amlogic S905X processor combined with 1GB RAM and 8GB eMMC flash. Eachlink IX809 PRO specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with penta-core Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video & Audio Output – HDMI 2.0 port Video Codec – 4K@60 Hz video decoding for 10-bit HEVC/H.265 and VP9; H.264 up to 4K@30 Hz Connectivity – 802.11 b/g/n Wi-Fi; It’s unclear whether Bluetooth is implemented. USB – 1x USB 2.0 host ports, 1x micro USB OTG port, 1x micro USB port for power only Power Supply – 5V/2A via micro USB port Dimensions & Weight – N/A […]

August 30, 2016December 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

$79 HiSilicon Poplar is the First 96Boards TV Platform Compliant Board

At the end of last month I wrote about 96Boards TV Platform specifications, and noticed Hisilicon had one such boards, but details were sparse. Linaro has now officially unveiled HiSilicon Poplar board, the first 96Boards TV Platform board, sold for $79 + shipping on Aliexpress. Poplar board specifications: SoC – HiSilicon Hi3798C V200 quad-core 64-bit ARM Cortex-A53 CPU up to 2.0 GHz per core with ARM Mali-T720 GPU supporting OpenGL ES 3.1/3.0/2.0/1.1/1.0, OpenVG 1.1, OpenCL 1.2/1.1 Full Profile, RenderScript, and Microsoft DirectX 11 FL9_3 Memory – 1 or 2 GB DDR3 (Specs are conflicting depending where you look) Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI 2.0a with HDCP 2.2 up to 4K @ 60Hz Video Decoding – H.265/HEVC Main/Main10 and VP9 up to 4K @ 60 fps Audio Output – HDMI, optical S/PDIF, 3.5mm audio jack Connectivity – Gigabit Ethernet, 802.11 b/g/n/ac WiFi […]