videostrong News - Page 5 of 5 - CNX Software

February 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 119 Comments

How to Configure DVB-S2 and DVB-T2 Tuners in K1 Plus Android DTV Receiver

I have previously reviewed VideoStrong K1 Plus Android TV box, but the company also has another model with the exact same name “K1 Plus” that includes a combo DVB-S2 & DVB-T2 tuner. That’s rather confusing, but nevertheless, since I now have the tuner version of the device, I’ve installed the latest firmware, started to play with it, and today I’ll explain how to configure DTV app for both satellite and terrestrial digital TV reception. Hardware Setup and DTV App The first step is to connect both your satellite dish and indoor or outdoor TV antenna to the device, as well as all necesarry cables, and possibly a USB hard drive if you want to use PVR function. Now go to the list of apps start DTV app, or press the DTV button on the remote control. Each time the app starts you’ll be asked to select DVBT2 or DVBS2, and […]

January 8, 2016August 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 138 Comments

Specs, Unboxing and Teardown of KI Plus Android TV Box with DVB-T2/S2 Combo Tuner

If you’ve been following this blog, you must now that I reviewed K1 Plus Android TV box based on Amlogic S905 processor a little while ago. Videostrong has sent me yet another K1 Plus device, except this time it is an Android receiver with a tuner card supporting both satellite (DVB-S/S2) and terrestrial (DVB-T/T2) reception. Today, I’ll list the specs, take a few pictures of the device, before checking out the tuner board. K1 Plus Android DTV receiver specifications The specifications are exactly the same as the TV box, except for the added tuner: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack […]

December 6, 2015December 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 118 Comments

How to Run Headless Linux on Amlogic S905 Devices Such as MINI MX or K1 Plus

A few week ago, I had been informed that Amlogic S905 U-boot and Linux source code was released, and one person use the code and other resources to load a minimal Ubuntu 14.04 image to his K1 Plus TV box and released the installation instructions and the image (Thanks olin!). I also have K1 Plus here, but since I’ve just finished reviewing Beelink MINI MX, I decided to use the latter instead. The instructions below boot Linux from the (micro) SD card, and can still boot Android if you remove the SD card. Modifying U-boot environment The instructions include opening the box, and connecting or soldering a USB to TTL debug board to access U-boot and change some parameters. But later once an image with network is working, you could also build and load fw_setenv and fw_saveenv, and do the same steps with an Android shell and without the need […]

November 28, 2015November 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

K1 Plus Amlogic S905 TV Box Review

Videostrong KI Plus is one of the first Amlogic S905 TV boxes to be launched on the market, and it also happens to be one of cheapest model selling for around $45 on various sites, and it’s even available for $39.99 on GearBest for Black Friday / Cyber Monday. I’ve posted the specifications and pictures of the device previously, and after updating the firmware, I’ve finally completed the review. First Boot, Settings and First Impressions As usual, I’ve connected a whole bunch of cables and peripherals to the device to make the power supply can handle it, including a USB hard drive, a USB webcam, a USB keyboard, a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, as well as a HDMI, optical audio and Ethernet cables, and a speaker connected to the 3.5mm AV jack and powered by one of […]

November 27, 2015November 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

H.264 & H.265 4K Video Playback on Amlogic S905 Android TV Box

I’ve almost completed my review of Videostrong K1 Plus Android box powered by Amlogic S905, and while there are many shortcomings, 4K video playback is actually pretty good with Android’s Video Player (Kodi is not really usable @ 4K). I connected the device to LG 42UB820T 4K UHD TV, and set video output to 2160p @ 60Hz, and went through several video samples: Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video looks somewhat OK, but big audio delay or AV sync issue. BT.2020.20140602.ts (H.265 Rec.2020 compliant – AAC audio) – OK (First time I can play this video on any hardware). Fifa_WorldCup2014_Uruguay-Colombia_4K-x265.mp4 (H.265 @ 60 fps – AC3) – Video is very good, but no audio MHD_2013_2160p_ShowReel_R_9000f_24fps_RMN_QP23_10b.mkv (10-bit HEVC @ 24 fps – no […]

November 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Videostrong K1 Plus Amlogic S905 Android TV Box Unboxing and Teardown

Many Amlogic S905 TV boxes have been announced, and thanks to Videostrong, I’ve received my first Amlogic S905 device for review with their K1 Plus media player (aka KI Plus). Today, I’ll start by listing the specifications, before taking a few pictures of the device and its board. with the full review following up in a few days. Videostrong K1 Plus Specifications K1 Plus is one of the entry level models with 1GB RAM and 8GB storage by default: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack Audio – HDMI, AV (stereo), optical S/PDIF Video Codecs – 10-bit H.265 up to 4K60, […]

November 13, 2015November 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 101 Comments

List of Amlogic S905 TV Boxes and Sticks

Rockchip RK3368 TV boxes looked promising at the end of the summer, but ended up being disappointing, not because of their expected lower performance compared to RK3288, but simply because they could not deliver on their main selling point: 4K H.265 / H.264 video playback, and the sheer number of issues with the first devices selling for nearly the same price as equivalent Rockchip RK3288 devices. Rockchip RK3368 will soon have a worthy competitor with Amlogic S905, which won’t deliver amazing benchmark scores, but looks promising for its 4K 10-bit HEVC video playback, HDMI 2.0 and HDCP 2.2, and historically Amlogic delivers better video playback than Rockchip. The first Amlogic S905 TV boxes should start shipping by the end of the month, and prices are starting very low, just over $40, thanks to competition between the many manufacturers launching devices based on the new Amlogic SoC. That’s why I’ve decided […]

January 30, 2015January 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Videostrong K1 is a Quad Core Android TV Box with a DVB-T2 Tuner

There are several Android media player with a digital TV tuner on the market, such as WeTek Play, but most, if not all, are based on Amlogic AML8726-MX dual core Cortex A9 processor, and so far, I have not seen quad core Android TV boxes with a built-in tuner. This is about to change thanks to Videostrong K1 an Android 4.4 media player powered by Amlogic S805 quad core processor, and an optional DVB-T2 tuner. K1 OTT TV Box specifications: SoC – Amlogic S805 quad core Cortex A5 processor @ 1.5GHz with a quad core Mali-450MP2 GPU System Memory – 1GB DDR3 (512MB, 2GB as option) Storage – 4 or 8 GB NAND flash (Options: 16 or 32GB), micro SD card slot Video Output – HDMI 1.4, AV (Composite and YPbPr supported) Audio Output – HDMI, AV, and optical S/PDIF Tuners – DVB-T2 Tuner with RF In and Out Connectivity […]