usb News - Page 11 of 33 - CNX Software

November 29, 2023January 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Raspberry Pi 5 gets 5G Modem HAT based on Quectel RM502Q-AE M.2 module

Sixfab has just launched a 5G Modem Kit for Raspberry Pi 5 with a Raspberry Pi HAT that takes Quectel RM502Q-AE 5G Sub-6GHz M.2 module working globally (except China), a “patent-pending” internal antenna for Sub-6 frequency bands designed by SixFab, and a USB 3.0 bridge connector. SixFab 5G modem Kit for Raspberry Pi 5 highlights: Sixfab 5G Modem HAT for Raspberry Pi 5 M.2 socket for 5G module Nano SIM card holder + embedded SIM USB 3.0 port and 40-pin GPIO header for connection to the Raspberry Pi 5 SBC Misc User button Status, power, and user (GPIO21) LEDs EEPROM for Raspberry Pi HAT compliance 2-pin fan connector Power Supply – 5V via USB Type-C port (on HAT itself) Dimensions – 88.1 x 57.7 x 21.7 mm Approvals – FCC, IC, CE, UKCA are in progress Quectel RM502Q-AE M.2 module 5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHz LTE […]

November 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

WP-DLC01 USB RGB LED controller supports dynamic lighting (in Windows 11 for now)

WisdPi WP-DLC01 dynamic lighting controller is a small USB board that can drive RGB LED strips and supports the Dynamic Lighting feature just introduced in the latest Windows 11 23H2 release. The board comes with a WisdPi RGB213-5 chip, a button, a USB-C port for control, and a 3-pin header designed to connect an ARGB LED strip which the user can place inside a PC or along a desk or table to personalize the user experience beyond the screen. Right now this works in Windows 11 23H2, but as we’ll see further below it should (eventually) work with other operating systems. The first step is to connect the controller either externally via a USB-C to USB-A/C cable or internally using the 15cm USB 2.0 internal motherboard header to USB Type-C cable provided with the WP-DLC01 board by default. WisdPi also offers a full kit that adds a 1-meter USB 2.0 […]

November 13, 2023November 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Dockcase 7-in-1 USB-C dock features a color information display (Crowdfunding)

Dockcase USB hub with built-in information display

USB-C docks have become somewhat boring, but Dockcase 7-in-1 USB-C dock is a little different with a transparent top cover made of tempered glass and an integrated color display that looks neat and may end up being useful by providing relevant information. The USB-C dock also comes with three 5Gbps USB 3.2 Gen 1 ports, a 4Kp60 capable HDMI 2.0 video output, SD card & microSD card slots, support for 100W USB PD, and a 10 Gbps USB Type-C port for connection to the host. Dockcase 7-in-1 USB-C dock specifications: Display – 1.33-inch color LCD display with 240 x 240 resolution Storage – SD and microSD (UHS-I) card slots HDMI output up to 4Kp60 (3840×2160) USB Input – 10Gbps USB-C port with cable Output – 3x USB 3.2 Gen 1 (5 Gbps) ports Misc – Control button Power Input – 100W (20V/5A) USB PD Dimensions – 122 x 40 x […]

November 2, 2023November 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

ADATA SE920 USB4 external SSD offers up to 2TB capacity, supports up to 3,800 MB/s data transfers

ADATA SE920 is a small USB4 external SSD with 1TB or 2TB storage capacity that leverages the 40 Gbps connection enabled by USB4 and delivers up to 3,800 MB/s sequential read speed. The storage device supports Thunderbolt 3 & 4 and is backward compatible with USB 3.2 and USB 2.0 standards. The USB-C port makes it suitable for mini PCs, laptops, SBCs, and even smartphones, but one potential downside of the small form factor is that it integrates a fan to cool the SSD although the user can enable/disable it by extending/retracting the telescopic case. ADATA SE920 specifications: Capacity – 1TB / 2TB Host interface – USB4 up to 40Gbps, backward compatible with USB 3.2/2.0 Performance Sequential Read – Up to 3,800 MB/s, or in other a 10GB file can be transferred in about 3 seconds Sequential Write – Up to 3,700 MB/s (USB4) or up to 3,200 MB/s (Thunderbolt […]

October 11, 2023October 11, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

COM-HPC 1.2 specification released with COM-HPC Mini 95x70mm form factor

PICMG has announced the release of the COM-HPC 1.2 specification adding the COM-HPC Mini form factor that’s about the size of a credit card (90x75mm) or half the size of the next-smallest COM-HPC form factor but still provides access to high-speed interfaces such as PCIe Gen5, USB4, and 10GbE. The COM-HPC “High-Performance Computing” form factor was introduced a few years ago for more powerful CPUs (higher TDP) with support for PCIe Gen4 (the COM Express form factor can’t handle PCIe Gen 4 clock speeds and throughputs well), and until now four sizes were available with COM-HPC Client Type modules measuring 95 x 120mm (Size A) to 160 x 120mm (Size C) and Server Type modules having either 160 x 160mm (Size D) or 200 x 160mm (Size E) dimensions. The COM-HPC Mini brings a smaller (95 x 60 mm) credit card-sized form factor to the COM-HPC standard for applications such […]

October 11, 2023October 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SMLIGHT SLZB-07 – A low-cost, compact Zigbee 3.0 USB adapter

SMLIGHT SLZB-07 is a low-cost, compact Zigbee 3.0 USB adapter based on Silicon Labs EFR32 microcontroller and CP2102 USB to serial chip designed to work with multi-vendor software systems such as Zigbee2MQTT and Home Assistant ZHA. The adapter lets you easily integrate any Zigbee devices into Smart Home automation systems such as Home Assistant, OpenHub, or HomeSeer and offers an alternative to products like the official SkyConnect USB stick and SONOFF ZBDongle-E. It’s also Thread and Matter ready. SMLIGHT SLZB-07 specifications: Wireless SoC – Silicon Labs EFR32MG21 Arm Cortex-M33 microcontroller @ 80 MHz with 352KB flash, 1024KB ROM for protocols and library functions, 96KB SRAM, integrated power amplifier, Bluetooth 5.2 Low Energy and 802.15.4 radios (Zigbee and Thread) Connectivity Zigbee 3.0 support, including Zigbee Green Power. Thread/Matter ready +3dB SMA antenna included USB – USB Type-A port for data and power Power Supply Input – 5V/60mA via USB-A Overvoltage protection […]

October 9, 2023October 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Waveshare RP2040-PiZero – A Raspberry Pi RP2040 board with Raspberry Pi Zero form factor

Waveshare RP2040-PiZero board is a Raspberry Pi Zero lookalike that features a Raspberry Pi RP2040 microcontroller instead of a Linux-capable application processor. But RP2040 board comes with the same layout as the Raspberry Pi Zero and similar ports including two USB Type-C ports, a mini HDMI/DVI connector, a microSD card slot, and a 40-pin GPIO header, but also adds support for LiPo batteries with a 2-pin connector and a charging circuit. RP2040-PiZero specifications: MCU – Raspberry Pi RP2040 dual-core Cortex M0+ microcontroller @ 133 MHz with 264 kB of embedded SRAM Storage – 16MB SPI flash, microSD card slot Video – Mini HDMI port that can output DVI signals USB – 1x USB Type-C port for data using PIO-USB host/device implementation Expansion – 40-pin color-coded header with 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x PWM, 8x Programmable I/O (PIO) state machines for custom peripheral support Misc – […]

October 2, 2023October 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Ollie v2 USB to UART/CAN/RS485/RS232 converter gets USB-C port, plastic enclosure, and more (Crowdfunding)

USB-C to UART, CAN Bus, RS485, and RS232 converter

Ollie v2 is an improved version of the Ollie USB to isolated UART, CAN Bus, RS232, and RS485 converter that gains a USB-C port, a plastic case, the ability to set the voltage from the target board, and various other minor improvements. Like the first version, the Ollie v2 is a portable tool designed for hackers and field engineers that allows them to work with a single device instead of a bunch of USB converters, each handling a single protocol, and isolation makes sure the host, such as a laptop, is protected from high voltages. Ollie V2 specifications: Serial chip – WCH CH344 quad-serial port chip (instead of XR21V1414 in the first design) Host interface – USB Type-C port Isolated interfaces (all with ESD protection) 2x UART ports up to 6 Mbps with 1.8/3.3/5 V or target voltage levels (set by slide switch) CAN 2.0A/B up to 1 Mbps bus […]