ubuntu News - Page 56 of 180 - CNX Software

March 31, 2022April 1, 2022 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

How to Install dnsmasq caching DNS server in Ubuntu

As you may have noticed in recent days, my domain registrar (HostFast) suspended cnx-software.com domain for what I believe are dubious reasons, meaning the site was inaccessible to the outside world and myself. I cannot do much about the latter and I’m held hostage to what the domain registrar’s will, but I was able to access my own website with my domain name after installing a DNS server through dnsmasq on my Ubuntu 20.04 laptop. Edit: most of the steps below are actually not needed in Ubuntu 20.04, since you could just edit /etc/hosts (step 4). I’ll just leave the instructions below in case somebody needs to install dnsmasq. Here are the steps I followed. Install dnsmasq

sudo apt install dnsmasq

1	sudo apt install dnsmasq

This did not work at first since systemd-resolved is already installed, so I disabled it by following instructions on askubuntu:

sudo systemctl stop systemd-resolved
sudo systemctl disable systemd-resolved
sudo systemctl mask systemd-resolved

sudo systemctl stop systemd-resolved

sudo systemctl disable systemd-resolved

sudo systemctl mask systemd-resolved

I then added name servers to /etc/dnsmasq.conf:

server=8.8.8.8
server=4.4.4.4

1 2	server=8.8.8.8 server=4.4.4.4

and cnx-software.com IP […]

March 29, 2022March 31, 2022 by Jean-Luc Aufranc (CNXSoft) - 61 Comments

Hardkernel launches ODROID-M1 Rockchip RK3568B2 SBC

It’s been a while since we have seen new hardware from Hardkernel, but the Korean company has just launched the ODROID-M1 SBC powered by Rockchip RK3568 with up to 8GB RAM. The single board computer is cooled with a large heatsink placed underneath, supports SATA and NVMe storage, offers HDMI and MIPI DSI video output, Gigabit Ethernet networking, as well as two USB 3.0, two USB 2.0 ports, an RTC backup battery, and a 40-pin GPIO header. ODROID-M1 specifications: SoC – Rockchip RK3568B2 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 MP2 GPU, 0.8 TOPS AI accelerator System Memory – 4GB or 8GB LPDDR4 RAM Storage 16MB SPI flash preinstalled with Petitboot MicroSD card socket eMMC module socket Native SATA 3.0 port + SATA power (5V only) tested up to around 500 MB/s M.2 NVMe M-Key socket (2-lane PCIe 3.0) for M.2 SSDs tested up to around […]

March 23, 2022January 7, 2023 by Ian W MORRISON (Linuxium) - 12 Comments

Higole F7G Plus Review – An affordable rugged tablet tested with Ubuntu 20.04 & Windows 11

Ruggedized industrial-use PCs are typically expensive so it is refreshing to see Higole F7G Plus, an Intel Gemini Lake Refresh tablet, being offered at an affordable price. Higole kindly sent one for review and I’ve looked at functionality and performance running on Ubuntu and also its Windows performance. Hardware Overview The Higole F7G Plus is a 10.1 inch IPS touch screen rugged industrial fanless tablet that uses Intel’s 14 nm Gemini Lake Refresh N4120 processor which is a quad-core 4-thread 1.10 GHz Celeron processor boosting to 2.60 GHz with Intel’s UHD Graphics. Designwise, meeting the MIL-STD-810G standard which is the de facto ‘ruggedized’ standard for consumer products and covers whether the device can work in a broad range of environmental conditions including surviving dropping, is evidenced by the thick protective shell around the tablet. To ensure its IP67 Certification for waterproofing each of the ports are covered by detachable rubber […]

March 22, 2022March 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

NVIDIA launches Jetson AGX Orin Developer Kit, Orin NX modules, and Isaac Nova Orin AMR platform

NVIDIA Jetson AGX Orin module was first introduced in November 2021, but the company has now officially launched the Jetson AGX Orin Developer Kit, andunveiled the lower cost Orin NX modules still with 70 TOPS or more, and the Isaac Nova Orin AMR (autonomous mobile robot) reference platform. NVIDIA Jetson AGX Orin Developer Kit Jetson Orin AGX developer kit specifications: Jetson AGX Orin module with CPU – 12-core Arm Cortex-A78AE v8.2 64-bit processor with 3MB L2 + 6MB L3 cache GPU / AI accelerators NVIDIA Ampere architecture with 2048 NVIDIA CUDA cores and 64 Tensor Cores @ 1.3 GHz DL Accelerator – 2x NVDLA v2.0 Vision Accelerator – PVA v2.0 (Programmable Vision Accelerator) AI Performance – Up to 275 TOPS (INT8) @ 60W Video Encode – 2x 4K60 | 4x 4K30 | 8x 1080p60 | 16x 1080p30 (H.265) Video Decode – 1x 8K30 | 3x 4K60 | 7x 4K30 | […]

March 15, 2022March 17, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

OnLogic announces Factor 201 Raspberry Pi CM4 industrial PC, Factor 202 controller coming soon

OnLogic has announced the launch of the Factor 201, a compact fanless industrial PC based on Raspberry Pi CM4 (Compute Module 4) for Edge IoT applications, and is working on the Factor 202 industrial controller with onboard digital and analog I/Os (DIO & AIO), as well as a capacitive touchscreen. OnLogic Factor 201 Specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – Optional M.2 SATA SSD (See Expansion section) Video Output – HDMI port up to 4Kp60 Networking 2x Gigabit Ethernet LAN (Optional PoE PD Input) via Realtek RTL8153 controller Optional WiFi/Bluetooth module on Raspberry Pi CM4 module + 3x antenna holes Optional 4G LTE wireless module via M.2 socket USB – 1x USB 3.2 Gen 1 port, 2x USB 2.0 ports, 1x USB-C management port Serial – […]

March 14, 2022March 14, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

BIVROST Lite5 mini-STX motherboard takes up to 96GB RAM for machine vision applications

BIVROST, a manufacturer of solutions in the field of image analysis and live video streaming, has just introduced the Lite5 mini-STX motherboard powered by an Intel Core Coffee Lake processor, and targeting machine vision, digital signage, security, video streaming, and other edge computing applications. The board is fitted with Advantech SOM-5899 COM Express Basic Type 6 module that supports up to 96GB DDR4 ECC memory, while the carrier board offers two Gigabit Ethernet ports, twelve USB interfaces, dual HDMI 2.0 video output, plus five M.2 expansion sockets. BIVROST Lite5 specifications: SoC Intel i7-8850H 6-core/12-thread processor @ up to 2.6 GHz / 4.3 GHz (Turbo) with 9MB cache, 24 EU Intel UHD 630 graphics; 45W TDP Intel i5-8400H 4-core/8-thread processor @ 2.5 GHz / 4.2 GHz (Turbo) with 8MB cache, 24 EU Intel UHD 630 graphics; 45W TDP Some Xeon processors are also available upon request System Memory – Up to […]

March 12, 2022October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

$249 Rockchip RK3588 8K mini PC comes with up to 16GB RAM

Mekotronics R58X is an embedded mini PC powered by Rockchip RK3588 Cortex-A76/A55 processor with 16GB RAM, dual Gigabit Ethernet, 8K capable HDMI and DisplayPort video output ports, HDMI input, M.2 NVMe storage, and more. This is yet another announcement of Rockchip RK3588 hardware following ROCK5 Pico-ITX SBC, Firefly ITX-3588J mini-ITX motherboard, and Mixtile Blade 3 server board among others. Melotronix R58X may have different use cases, as it is suitable as an IoT gateway, an industrial PC, an edge computing platform, a video analytics server, digital signage, a vehicle control unit, and other embedded applications. Mekotronics R58X mini PC/SBC specifications: SoC – Rockchip RK3588 octa-core processor with four Cortex-A76 cores @ 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz, an Arm Mali-G610 MP4 GPU, a 6TOPS NPU, 8K 10-bit decoder, 8K encoder System Memory – Up to 16GB LPDDR4x Storage eMMC 5.1 flash 2x SATA 3.0 connectors + SATA power […]

March 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UP Xtreme i11 mini PC review with Ubuntu 20.04, Edge Insights for Vision

UP Xtreme i11 review Edge Insights for Vision

UP Xtreme i11 is both a single board computer and a mini PC powered by an Intel Tiger Lake processor and designed for industrial edge applications. I received the one sample of the mini PC called “UP Xtreme i11 Edge Compute Enabling Kit” last December based on an Intel Core i7-1185GRE processor, fitted with 16GB RAM, a 128GB SSD, and pre-loaded with Ubuntu 20.04 operating system. I’ve now had more time to play with the system, and I’ll report my experience with Ubuntu 20.04 and Edge Insights for Vision, a computer vision framework that’s part of the getting started guide. The latter was missing from my package possibly because customs opened the package, and forgot to put it back in. The most important part is “devkit” is used as username and password. Software for UP Xtreme i11 and Fan Control While Ubuntu 20.04 is pre-installed on the mini PC, it’s […]