ubuntu

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on SAPPHIRE EDGE IPC-FP6 mini-ITX motherboard supports 10GbE networking

SAPPHIRE EDGE IPC-FP6 mini-ITX motherboard supports 10GbE networking

SAPPHIRE IPC-FP6 mini ITX motherboard 10GbE

SAPPHIRE EDGE IPC-FP6 is a mini-ITX motherboard powered by an AMD Ryzen Embedded V2000 SoC with support for 10GbE networking and designed for gaming machines, medical imaging equipment, digital signage, thin clients, or POS terminals. The motherboard also comes with four 4K-capable DisplayPort video outputs, M.2 sockets for storage and wireless, two SATA ports for mass storage, up to eight USB interfaces, a PCIe x8 slot for expansion,  and a combo audio jack. SAPPHIRE EDGE IPC-FP6 specifications: SoC – AMD Ryzen Embedded V2000 AMD Ryzen Embedded V2516 hexa-core/12-thread processor @ 2.1 GHz / 3.95 GHz (Turbo) with 3MB L2 cache, 6 CUs Radeon RX Vega 6 GPU @ 1.5 GHz; TDP: 10-25W TDP (15W default) AMD Ryzen Embedded V2546 hexa-core/12-thread processor @ 3.0 GHz / 3.95 GHz (turbo) with 3 MB L2 cache, 6 CUs Radeon RX Vega 6 GPU @ 1.5 GHz; TDP: 35-54W TDP (45W default) AMD Ryzen […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on GEEKOM Mini Air12 mini PC review – Part 3: Ubuntu 22.04 Linux

GEEKOM Mini Air12 mini PC review – Part 3: Ubuntu 22.04 Linux

GEEKOM Mini Air12 mini PC Review Ubuntu 22.04 Linux

After going through an unboxing and teardown for the GEEKOM Mini Air12, we tested the Intel Processor N100 mini PC with Windows 11 Pro, and we’ve now had time to check Ubuntu 22.04 on the device and will report our experience with Linux in the third part of the review. We tested the hardware features, networking and storage performance, YouTube video streaming, and ran some benchmarks in Ubuntu 22.04, before checking out the cooling performance, fan noise, and power consumption of the GEEKOM Mini Air12 in Linux. We installed Ubuntu 22.04 alongside Windows 11, after having shrunk the Windows 11 partition by about half before inserting a USB drive with Ubuntu 22.04.3 ISO, and the installation went smoothly with no drivers missing. Ubuntu 22.04 system information The About window in the settings confirms we have a mini PC with a quad-core Intel Processor N100 SoC, 16GB of RAM, and a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on AAEON UP Xtreme 7100 robotics SBC and mini PC is offered with Core i3-N305 or Processor N97 CPU

AAEON UP Xtreme 7100 robotics SBC and mini PC is offered with Core i3-N305 or Processor N97 CPU

UP Xtreme 7100 robotics SBC

AAEON UP Xtreme 7100 SBC and Mini PC powered by an Intel Core i3-N305 or Processor N97 Alder Lake-N CPU and designed as an “all-in-one robotics solution” providing the sensor data processing, graphics, and other resources required for path planning and control algorithms used in AGVs (automated guided vehicles) and AMRs (autonomous mobile robots). The UP Xtreme 7100 single board computer and UP Xtreme 7100 Edge mini PC are both offered in compact form factors suitable for robots and feature terminal blocks for serial communication (RS-232/422/485 port and CAN bus) and a 30-pin Phoenix connector with 24V digital I/O and GPIOs. Other features useful for industrial use include 9V to 36V DC input, vibration/shock resistance, and lockable I/O ports. UP Xtreme 7100 specifications: Alder Lake N-series SoC (one or the other) Intel Processor N97 quad-core processor up to 3.6 GHz with 6MB cache, 24EU Intel UHD Graphics Gen 12 @ […]

Posted on by Vladislav Losev - 6 Comments on Chatreey AM08 Pro review – Part 3: Ubuntu 22.04 and ESXi 7.0 on an AMD Ryzen 9 7940HS mini PC

Chatreey AM08 Pro review – Part 3: Ubuntu 22.04 and ESXi 7.0 on an AMD Ryzen 9 7940HS mini PC

Chatreey AM08 Pro Review Ubuntu VMWare ESXi

In the first article, I checked out the hardware of the Chatreey AM08 Pro mini PC powered by an AMD Ryzen 9 7940HS CPU and tested it with Windows 11 Pro in the second part of the review. Now it’s time for the third part where I’ll test Ubuntu 22.04.03 Desktop OS and ESXi 7.0 update 3C hypervisor on the AM8 Pro mini PC. The installation process was simple enough and both WiFi and Ethernet were detected correctly. Contents Ubuntu 22.04 System information with AM08 Pro Performance of AM08 Pro 7940HS sbc-bench.sh Geekbench  iozone3  FIO  Network performance (2.5GbE and WiFi 6) of AM08 Pro 7940HS 2.5 GbE WiFi 6E  Stress test and CPU temperature of AM08 Pro 7940HS Power consumption of AM08 Pro 7940HS Jellyfin on Ubuntu 22.04.03 (server) ESXi 7.0 Installation The stability Conclusion 1. Ubuntu 22.04 1.1. Ubuntu System information with AM08 Pro The system information in Ubuntu […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on NanoPC-T6 LTS SBC adds USB ports, 32MB SPI flash, drops 4G LTE support

NanoPC-T6 LTS SBC adds USB ports, 32MB SPI flash, drops 4G LTE support

NanoPC-T6 LTS

NanoPC-T6 LTS is an update to the Rockchip RK3588-powered NanoPC-T6 SBC introduced in May 2023, which removes the mini PCIe socket and SIM card slot for 4G LTE connectivity, but adds two USB 2.0 ports, a USB-C debug port, a 10-pin header with UART and USB 2.0, and comes with 32MB SPI flash by default. The single board computer is offered with up to 16GB RAM and 256GB eMMC flash and also features M.2 sockets for NVMe storage and a wireless module, two 2.5GbE RJ45 ports, two HDMI 2.1 output ports, one HDMI 2.0 input port, MIPI DSI and CSI interfaces, and a 40-pin GPIO header for expansion. NanoPC-T6 LTS specifications with changes in bold or strikethrough: SoC – Rockchip RK3588 CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ 1.8 GHz GPU – Arm Mali-G610 MP4 GPU with support for OpenGL […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on NanoPi R2S Plus dual GbE SBC and router gets 32GB flash, USB-C debug port, M.2 socket for WiFi

NanoPi R2S Plus dual GbE SBC and router gets 32GB flash, USB-C debug port, M.2 socket for WiFi

NanoPi R2 Plus

NanoPi R2S Plus dual GbE SBC and router is an update to the Rockchip RK3328-powered NanoPi R2S SBC that was introduced in 2020 with the new model adding a 32GB eMMC flash, a USB-C debug port for easier debugging without having to open the enclosure, and an M.2 socket for an optional SDIO WiFi module. The NanoPi R2 Plus still comes with 1GB DDR4 memory, a microSD card, two gigabit Ethernet ports implemented through the RK3328’s GMAC and a USB 3.0 controller, adds one extra USB 2.0 port, and ditches the micro USB port used for power with a USB-C port. NanoPi R2S Plus specifications: SoC – Rockchip RK3328 quad-core Cortex-A53 @ 1.5 GHz with Arm Mali-450MP2 System Memory – 1GB DDR4 RAM Storage – 32GB eMMC flash, MicroSD card slot, SPI flash footprint Connectivity 1x Gigabit Ethernet (WAN) up to 941 Mbps (measured) via Realtek RTL8211F gigabit Ethernet controller […]

Posted on by Tomisin Olujinmi - No Comments on The PCOM-B65A COM Express module is powered by Intel Core Ultra Processors

The PCOM-B65A COM Express module is powered by Intel Core Ultra Processors

PCOM B65A front

Taiwan-based embedded systems manufacturer, Portwell, has announced a new COM Express Type 6 Basic module based on the Intel Core Ultra processor platform. The Portwell PCOM-B65A module is a minimal COM Express module that comes with either one of the H-series or U-series processors in the Core Ultra series. The Intel Core Ultra series (formerly known as Meteor Lake) uses Intel’s 3D performance hybrid architecture (two core microarchitectures on a chip) to optimize performance and distribute workloads efficiently. It also features an integrated neural processing unit that offers low-power AI acceleration and hardware offloading.The I/O and artificial intelligence feature set on the PCOM-B65A COM Express module suits several embedded applications such as medical devices, automation, IoT, and industrial control. We have already covered other products based on the newly released 14th Gen Intel Core Ultra (Meteor Lake) series with the ADLINK’s cExpress-MTL Type 6 Compact module and the ASRock Industrial’s […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 25 Comments on Radxa X2L Intel Celeron J4125 SBC goes for as low as $39

Radxa X2L Intel Celeron J4125 SBC goes for as low as $39

Radxa X2L

Radxa X2L is an inexpensive Intel Celeron J4125 Gemini Lake Refresh single board computer (SBC) that ships with 2GB to 8GB RAM, an M.2 socket for SSD storage, another M.2 socket for a wireless module, and offers a range of ports such as dual HDMI, gigabit Ethernet, four USB port, and a 40-pin GPIO header. The price starts at $39, a price point that reminds me of the Atomic Pi SBC introduced a few years ago with an Atom X5 Cherry Trail processor, but the Radxa X2L is easier to use, offers better performance and modern features, as well as a low-profile form factor that’s about the size of a smartphone, just a bit thicker. Radxa X2L specifications: SoC – Intel Celeron J4125 quad-core Gemini Lake Refresh processor @ 2.0 / 2.7 GHz (Turbo) with Intel UHD Graphics 600 @ 250/750 MHz; 10W TDP MCU – Raspberry Pi RP2040 microcontroller […]

Exit mobile version
EmbeddedTS embedded systems design