TV box News - Page 61 of 108 - CNX Software

November 6, 2015November 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 245 Comments

Giveaway Week – Eny M8S Android TV Box

Today, I’m going to give away Eny M8S, an Android media player based on Amlogic S812 processor with 2GB RAM and 8GB NAND flash that runs Android 4.4, and supports H.265 video playback up to 3840×2160 at 30 fps. How does the device perform? Well, I don’t really know because I postponed the review due to many problems including HDMI going on and off, lack of Google Play Store, some power issues, and eventually the box refused to boot. When I finally got a new firmware, I did upgrade it, but so many months had passed, that I postponed the review indefinitely… Having said that, I tested its 4K capabilities later on, and again before this giveaway to reset the box to factory settings, and it booted fine… The box is not abandoned, as the company released a new firmware at the beginning of this month, so the lucky winner […]

November 4, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 203 Comments

Giveaway Week – M-195 Android TV Box

The third TV box of this giveaway week is a one year old device based on Realtek RTD1195 dual core Cortex A7 processor with a Mali-400MP2. However, beside relatively weak CPU and GPU, M-195 Android TV box features some fast interfaces like USB 3.0, and Gigabit Ethernet, as well as 4K video decoding and output, HDMI audio pass-through up to 7.1 channels, an HDMI input port, and H.265 video codec support. While I found out the device was quite slow at times during the review, video playback quite good using XBMC with an external player, and USB 3.0 and Gigabit Ethernet interface provides a boost, albeit limited, compared to other devices with only USB 2.0 and Fast Ethernet. At the time of review, 7.1 audio pass-through did not work, nor SAMBA in XBMC (now Kodi), and HDMI input was not very useful, but M-195 has got several firmware updates, including […]

November 3, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 232 Comments

Giveaway Week – ARNU Box Mach Q Pure Linux Media Player

The second device for this giveaway week is ARNU Box Mach Q TV box that runs Kodi 15.2 on an Amlogic S805 quad core processor with 1GB RAM and 8GB flash, the little brother of ARNU Box Mach 10 powered by the more powerful Amlogic S812 processor. Due to lack of time I did not review ARNU Box Mach Q, but I did review ARNU Box Mach 10, which is loaded with a similar firmware based on Linux based EmBER OS. Video playback was very good with Kodi 15.2 with automatic frame rate switching support, working audio pass-through via S/PDIF, but HDMI audio pass-through did not work with my AV receiver. Since it’s the same firmware base, I fully expect the same good video experience on ARNU Box Mach Q minus support for 4K videos. You can find more pictures on ARNU Box Mach Q unboxing and teardown post. To […]

November 2, 2015November 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 262 Comments

Giveaway Week – Zidoo X6 Pro Android TV Box

Time for another giveaway week that will take place on November 2 – 8, with one device or board given away per day. The first device is Zidoo X6 Pro TV box powered by Rockchip RK3368 octa core SoC with 2GB RAM and 16GB Flash. Zidoo X6 Pro review showed a capable device, and pretty good, although not perfect yet, Kodi 15.1 implementation, however the device tends to overheat pretty quickly leading to very poor performance at times. So the company will have to work on improving thermal management in their firmware, beside fixing a few other bugs. I received two Zidoo X6 Pro samples due to miscommunication: one from Zidoo directly which I used for the review, one from GeekBuying which I’m giving away today, and is basically new, although I’ve quickly tried it to make sure it boots. You can find more pictures on Zidoo X6 Pro unboxing […]

October 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

$47 Beelink MINI MX Android 5.1 TV Box Features Amlogic S905 Processor

It really feels like Christmas is around the corner, as deals on new and existing products keep on coming. About two weeks ago, I noted one of the first TV boxes based on Amlogic S905 processor, MXQ Pro, was starting (pre-)selling for as low as $48. Not bad for a device that is supporting HDMI 2.0 and 10-bit HEVC up to 4K @ 60 fps. Since then the price has gone up a little to $52 shipped, but Beelink MINI MX has started to up show up on a few sites, and the device is pre-sold for $46.89 on GearBest with GBMINIX coupon. The case is very similar to Allwinner H3 based Beelink X2, and the specifications similar to the ones for MXQ Pro: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – […]

October 27, 2015October 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Inphic SPOT i5 Android Media Player Costs only $25 (Promo)

If the trend continues, they’ll soon just giveaway TV boxes. After writing about Beelink X2 TV box selling for $31.99 shipped yesterday, I learned that Inphic is organizing a promotion for the launch of their cute Inphic SPOT i5 media player based on Amlogic S805 processor. While the regular price is $26 plus shipping, they’ll offer the first 100 samples for just $13 plus shipping starting at midnight on October 27 (GMT-8), which amounts to $24.22 to my location, and about $25.15 to the US. Inphic i5 specifications: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB NAND flash + micro SD slot up to 32GB Video & Audio Output – HDMI 1.b up to 1080p60 with CEC support Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek) USB – 1x micro USB OTG port Misc […]

October 26, 2015December 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Beelink X2 4K TV Box Powered by Allwinner H3 is Now Selling for $32

Allwinner launched Allwinner H3 in December 2014 for Android TV boxes supporting 4K resolution selling for $35 to $50, but the first devices that started showing up in January sold for about $80. As the year passed, prices became more reasonable such as the $59 Zidoo X1 TV Box or $35 Tronsmart Draco H3 TV stick , and when Orange Pi PC development board launched for $15 + shipping, it was clear Allwinner H3 was a dirt cheap processor. The good thing is that you can now buy a 4K Android media player for just $31.99 shipped with Beelink X2 sold on GearBest. Beelink X2 specifications: SoC – Allwinner H3 quad core ARM Cortex A7 @ 1.2GHz with quad core Mali-400MP2 System Memory – 1 GB RAM Storage – 8 GB NAND flash + micro SD slot up to 32GB Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi Video Output – […]

October 25, 2015October 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Kingnovel R8 Android TV Box Review (VLC Edition)

Kingnovel R8 is one of the many Rockchip RK3368 based TV boxes on the market, and since I’ve already provided the specs, as well as pictures of the device and board, I’ll carry on with the review today. While I’m usually testing video playback in Kodi, I’ve only spent a short time with Kodi 15.2 on this box, and instead switched to VLC (aka VideoLAN), an another open source media player, and my favorite program to watch videos in my Ubuntu computer. Of course, I’ve also tested most hardware features and performance of the device. First Boot, and First Impressions Since I like to test worst case scenarios, I also make sure I use all the ports of the devices, and connected a USB hard drive, USB RF dongles, USB webcam, and relevant cables to the device before powering it up. Once you connect the power, I recommend you have […]