TV box News - Page 60 of 108 - CNX Software

November 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Videostrong K1 Plus Amlogic S905 Android TV Box Unboxing and Teardown

Many Amlogic S905 TV boxes have been announced, and thanks to Videostrong, I’ve received my first Amlogic S905 device for review with their K1 Plus media player (aka KI Plus). Today, I’ll start by listing the specifications, before taking a few pictures of the device and its board. with the full review following up in a few days. Videostrong K1 Plus Specifications K1 Plus is one of the entry level models with 1GB RAM and 8GB storage by default: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack Audio – HDMI, AV (stereo), optical S/PDIF Video Codecs – 10-bit H.265 up to 4K60, […]

November 13, 2015November 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 101 Comments

List of Amlogic S905 TV Boxes and Sticks

Rockchip RK3368 TV boxes looked promising at the end of the summer, but ended up being disappointing, not because of their expected lower performance compared to RK3288, but simply because they could not deliver on their main selling point: 4K H.265 / H.264 video playback, and the sheer number of issues with the first devices selling for nearly the same price as equivalent Rockchip RK3288 devices. Rockchip RK3368 will soon have a worthy competitor with Amlogic S905, which won’t deliver amazing benchmark scores, but looks promising for its 4K 10-bit HEVC video playback, HDMI 2.0 and HDCP 2.2, and historically Amlogic delivers better video playback than Rockchip. The first Amlogic S905 TV boxes should start shipping by the end of the month, and prices are starting very low, just over $40, thanks to competition between the many manufacturers launching devices based on the new Amlogic SoC. That’s why I’ve decided […]

November 11, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Giveaway Week Winners (November 2015)

The third giveaway week, and the second in 2015, on CNX Software is now complete. I’ve just sent the packages this morning, including 4 Android TV boxes, 2 Linux media players, and a development board to the winners from Europe, North America, and for the first time, Oceania. The winners were selected randomly from the list of people who comments, and without any further due, here are the results: let’s go through the winners and their country of residence, with links to the original individual winner announcements: Zidoo X6 Pro – Marko, Slovenia ARNU Box Mach Q Pure Linux – Xavier, Belgium M-195 TV box – Fran, Spain A80 OptimusBoard development board – Gil, Portugal M8S TV box – Roel, Belgium Tronfy Telos MXIV – Treb “winners are grinners”, Australia Popcorn Hour VTEN – ax, USA While last time, people living in Canadians were the luckiest, this giveaway was kind to people […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Ugoos AM1 TV Box and Some Amlogic S905 Benchmarks

A few TV boxes based on Amlogic S905 processor are currently up for pre-order such as MXQ Pro and Beelink MINI MX mini PCs with 1GB RAM, 8GB storage, and which are due to ship later this month. Ugoos is also working on their own AM1 TV box and AM2 TV stick based on Amlogic S905 processor, with some better specs, and today released a few more details about Ugoos AM1. Ugoos AM1 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (Samsung); 4GB version likely later on Storage – 16GB eMMC flash + SD card slot Video Output – HDMI 2.0 Audio – HDMI, optical S/PDIF Connectivity – 10/100/1000M Ethernet (Realtek RTL8211F), 802.11 b/g/n/ac Wi-Fi and Bluetooth 4.0 (AP6335 module) USB – 3x USB 2.0 host ports Misc – IR receiver Power Supply – […]

November 7, 2015November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 244 Comments

Giveaway Week – Tronfy MXIV Telos Android Lollipop TV Box with Amlogic S812 Processor

After Eny M8S yesterday, I’m now giving away another Amlogic S812 quad core TV Box with Tronfy MXIV Telos. Noticeable differences are that it runs Android 5.1 instead of Android 4.4, and features more storage (16GB), 802.11ac WiFi, and Gigabit Ethernet. So on paper Tronfy MX4 Telos appears to be a great improvement over products like M8S with better hardware, and a more recent Android firmware. While Tronfy MVIX Telos review did confirm the hardware was pretty good with good networking performance and a fast internal storage, the firmware was not quite ready for prime time, with disastrous Kodi support, and a settings app that would keep on crashing. There’s not much you can do about the latter without a newer firmware, but you might try out some other versions of Kodi to improve video playback. You can find more photos on the unboxing and teardown post. To enter the […]

November 6, 2015November 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 245 Comments

Giveaway Week – Eny M8S Android TV Box

Today, I’m going to give away Eny M8S, an Android media player based on Amlogic S812 processor with 2GB RAM and 8GB NAND flash that runs Android 4.4, and supports H.265 video playback up to 3840×2160 at 30 fps. How does the device perform? Well, I don’t really know because I postponed the review due to many problems including HDMI going on and off, lack of Google Play Store, some power issues, and eventually the box refused to boot. When I finally got a new firmware, I did upgrade it, but so many months had passed, that I postponed the review indefinitely… Having said that, I tested its 4K capabilities later on, and again before this giveaway to reset the box to factory settings, and it booted fine… The box is not abandoned, as the company released a new firmware at the beginning of this month, so the lucky winner […]

November 4, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 203 Comments

Giveaway Week – M-195 Android TV Box

The third TV box of this giveaway week is a one year old device based on Realtek RTD1195 dual core Cortex A7 processor with a Mali-400MP2. However, beside relatively weak CPU and GPU, M-195 Android TV box features some fast interfaces like USB 3.0, and Gigabit Ethernet, as well as 4K video decoding and output, HDMI audio pass-through up to 7.1 channels, an HDMI input port, and H.265 video codec support. While I found out the device was quite slow at times during the review, video playback quite good using XBMC with an external player, and USB 3.0 and Gigabit Ethernet interface provides a boost, albeit limited, compared to other devices with only USB 2.0 and Fast Ethernet. At the time of review, 7.1 audio pass-through did not work, nor SAMBA in XBMC (now Kodi), and HDMI input was not very useful, but M-195 has got several firmware updates, including […]