TV box News - Page 48 of 108 - CNX Software

August 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Android TV Box Survey Results – Kodi, YouTube, Netflix, Brands, Support, and Prices

I’ve launched a survey on behalf of a TV box manufacturer two weeks ago, and the results are now in with over 400 respondents. As promised, the company provided the results so let’s have a look. First, most of respondents use a TV box without tuner, while some have both, and a few others haven’t purchased one yet. Survey participants where then asked about the most important apps in an Android TV box with a 1 (not important) to 6 (very important) scale. The results are not really surprising with Kodi and YouTube being the most sought after apps. Netflix came a distant third, and a fair amount of respondents want their TV box to support HD resolutions. Most people could not care less about Hulu and Sling TV. The third question was about the price people were ready to pay for a TV box with the same specs, but […]

August 15, 2016October 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 55 Comments

Amlogic S912 Android TV Boxes List So Far

Following up on the tradition to create list of TV boxes with popular processor, such as my Amlogic S905 TV boxes and sticks list, I’ve decided to generate a comparison table for the first ten Amlogic S912 Android TV boxes announced so far. There won’t be any S912 TV sticks, as the processor probably dissipate a little too much heat to be useful in that form factor. All TV boxes in the table below share the same Amlogic S912 octa-core Cortex A53 processor @ 2.0 GHz with an ARM Mali-820MP3 GPU, support for HDMI 2.0a output, HDR, 4K video playback for VP9, H.265 and H.264 codecs, and run Android 6.0, so I only included columns for items that differ between products. Remarks: AV means 3.5mm AV jack with composite and stereo audio, and prices are usually retail prices with shipping by registered airmail from China, except for the ones followed […]

August 15, 2016August 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

4K VP9, H.265 and H.264 Video Playback in Amlogic S912 M12N TV Box

I’ve received my first Amlogic S912 TV box with MXQ Plus M12N TV box this week-end, and I’ve decided to start testing by showing the media capabilities of the platform that is supposed to support 4K VP9 up to 60Hz, 4K 10-bit H.265 up to 60Hz and 4K H.264 up to 30 Hz. I connected the device to Onkyo TX-NR636 A/V recevier itself connected to LG 42UB820T 4K UHD TV, set video output to 2160p @ 60Hz, and played several 4K video samples from a USB hard drive using the pre-installed version of Kodi 16.1: 4K Hawaii Sunset _ GoPro Hero 4 Black 4k@30fps-I7CycuMpQ3w.webm (Downloaded from YouTube) – OK Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video a bit choppy, large audio delay. Expected […]

August 13, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

MXQ Plus M12N (Amlogic S912) TV Box Review – Part 1: Specs, Unboxing, and Teardown

Shenzhen Shiningworth has just sent me the first Amlogic S912 Android TV box for review with their MXQ Plus M12N model. The first part of the review will focus on specifications, accessories, and hardware design, and in the second part I’ll connect and boot the device to make a thorough review of the firmware. MXQ Plus M12N Specifications The specifications are pretty standard and comparable to the ones of yet to launch Amlogic S912 TV boxes: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash and SD slot up to 32GB Video Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and AV port (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Connectivity – Fast Ethernet, dual band WiFi 802.11 b/g/n/ac, […]

August 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zidoo X9S Android TV Box, OpenWrt NAS, and HDMI Recorder is Now Up for Pre-order for $149

Zidoo X9 was one the first Android TV boxes with HDMI input that supported video recording and PiP, and back in April, the company unveiled a new and more powerful model called Zidoo X9S with many of the same features, but based on Realtek RTD1295 64-bit processor, and with NAS features. GeekBuying has just informed me that they had started to take pre-orders for Zidoo X9S for $149 with shipping scheduled to start on August 31st. Zidoo X9S specifications have slightly changed since the announcement, and the case has been redesigned: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC + SATA 3.0 external interface + micro SD card slot up to 32GB Video I/O HDMI 2.0a output up to 4K@60Hz; supports 23.976 and 29.94 Hz outputs HDMI 2.0 input for recording, UDP streaming, and picture-in-picture […]

August 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Hacker H3 Smart Home Multimedia Gateway Combines Amlogic S905 and Mediatek MT7628AN Processors

There are plenty of Amlogic S905 TV boxes on the market, but Hacker H3 has some notable features such as an internal 2.5″ SATA bay, as well as MediaTek MT7628AN WiSoC and MT7612E 802.11ac 867Mbps chip to provide router functionality via one WAN port, two LAN ports, and WLAN. Hacker H3 media gateway specifications: Media SoC – Amlogic S905 quad core Cortex A53 processor @ up to 2.0GHz with penta-core Mali-450MP GPU System Memory – 1GB DDR3 @ 1866MHz Storage – 16 or 64GB eMMC flash + 1x SATA bay up to 6TB Network SoCs – Mediatek MT7628AN MIPS 24KEc CPU @ 580MHz + Mediatek MT7612E 867Mbps 802.11ac chipset Video Output – HDMI 2.0 port up to 4K @ 60 Hz Audio Output – HDMI + 3.5mm audio jack Connectivity WiFi 802.11 b/g/n up to 300 Mbps, 802.11ac up to 866 Mbps (AC1200 router) with two built-in antennas 2x 10/100M […]

August 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

NEXBOX A1 Amlogic S912 Android TV Box Presells for $71

NEXBOX A1 was one of the first announcements of an Android TV box powered by Amlogic S912 SoC, but there weren’t many details at the time. Since then several other boxes has been announced, but few have prices, and GearBest now informed me that they were taking pre-orders for NEXBOX A1 for $70.99 including shipping with coupon GBNA1. NEXBOX A1 specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash and SD slot up to 32GB Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV, and optical S/PDIF Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n, Bluetooth 4.0 USB – 2x USB 2.0 ports Misc – IR receiver, power button Power Supply – 5V/2A Dimensions- 9.3 x 9.3 x 1.5 cm Weight – 190 […]

August 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rikomagic MK22 Amlogic S912 TV Box is Coming Soon

We already know Amlogic S912 TV boxes are coming, after several Amlogic S912 TV box boards surfaced, and products such as Qintaix Q912, and Beelink GT1 were announced. So it’s no surprise that Rikomagic has announced their own Amlogic S912 TV box with MK22. Rikomagic MK22 Specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash and micro SD slot up to 32GB Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV, and optical S/PDIF Video codecs – VP9-10/ and H.265 up to 4Kx2K@60fps, H.264, WMV, MPEG-1/2/4, VC-1, AVS, and RealVideo up to 1080p@60fps Audio codecs – MP3, WMA, AAC, WAV, FLAC, Ogg, and programmable with 7.1/5.1 down-mixing Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n, Bluetooth 4.0 USB – 2x USB 2.0 ports, 1x […]