TV box News - Page 40 of 108 - CNX Software

December 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$59 RetroEngine Sigma Retro Game Console is Based on Orange Pi Lite Board (Crowdfunding)

2016 has been the year of retrogaming comeback with products like PocketCHIP, Nintendo NES Classic, GPD Win and quite a few other projects. There will soon be a new option with RetroEngine Sigma, an inexpensive Linux based retro-gaming console based on Allwinner H3 processor. RetroEngine Sigma fanless game console hardware specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 16 or 32GB micro SD card Video & Audio Output – HDMI port Connectivity – 802.11 b/g/n WiFi USB – 2x USB 2.0 host ports, 1x micro USB OTG port Misc – Programmable status LED, 2 user configurable buttons P1 & P2 Power Supply – 5V/2A via power barrel Dimensions – 110 x 85 x 33.5 mm The specifications look similar, so I went to my little list of Allwinner H3 […]

December 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SDMC DV8219-LTE Android TV Box Comes with a Built-in 4G LTE Modem

Most users connect their TV boxes to the Internet through WiFi or Ethernet, but in some specific use case, such as digital signage in mass transport or in remote locations, it might be useful to get access to cellular networks. We’ve seen a few Android TV boxes with a built-in 3G modem in the past including CS918S and MBX-3G, but the former is based on the rather old Allwinner A31s processor, and the latter did not raise enough found on Indiegogo. But there’s nothing new, as SDMC DV8219-LTE is a more recent TV box powered by Amlogic S905X processor and running Android 6.0, equipped with a 4G LTE modem. SDMC DV8219-LTE TV box specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 1GB DDR3 SDRAM (2GB as option) Storage – 8GB eMMC flash (4 to 64GB as […]

November 28, 2016April 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 60 Comments

How to Play Netflix HD on any Android Device with Widevine Level 1 DRM

A while ago I wrote an article entitled “Why Doesn’t your Android TV Box Play Full HD or 4K Videos in Netflix?” basically explaining that most TV boxes running Android could only play SD quality, because HD and higher quality requires both Widevine Level 1 DRM, and Netflix certification, and the second part is the most difficult since Netflix need to spend time testing a given product, and may not agree to do so for smaller manufacturers. The end result is that only a small subset of devices can play Netflix HD. Samsung Tab S2 is one of the device with Widevine Level 1, but is not certified by Netflix, and by default can only play SD quality. But XDA Forum user chenxiaolong apparently found a workaround and as the photo above shows is now able to reach HD resolutions (e.g. 1920×1080) with Netflix using his tablet. After analyzing packets […]

November 24, 2016July 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Himedia Q5 Pro & Q10 Pro TV Boxes Get Android 7.0 Nougat Firmware

The majority of TV boxes sold today are running Android 4.4 to Android 6.0, but with the release of Android 7.0 for smartphones and tablets earlier this year, it was just a question of time before the OS got ported to TV boxes. Himedia appears to be the first company to have released Android 7.0 for their Hisilicon Hi3798CV200 based TV boxes, namely Q5 Pro and Q10 Pro. The changelog for the new firmware includes: Android N OS running stable and smooth Support for Android N Google Play version Support for Samba UPnP System function perfectly upgraded from 5.1 to Android N with compatibility Youtube updated to 4.10.7 and Netflix to 1.3.11 Homepage, Application Management, Media Center optimized, focus movement are more swift and smooth Media Player upgraded and support mouse operation Local Media Playback Improved; Certain rare videos black screen, display ratio of 3D to 2D abnormal, and occasional […]

November 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Geniatech ATV1960 Octa-core Android TV Box Comes with a Dual TV Tuner (ATSC or DVB-T2)

We now have so many Amlogic S912 Android TV boxes on the market, it becomes hard for companies to differentiate, but Geniatech is offering something different with their Geniatech/Mygica ATV1960 model thanks to a dual TV tuner support either ATSC or DVB-T2 and allowing you to watch a program, while recording another. Geniatech/Mygica ATV1960 specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot + 2.5″ SATA bay (cover on the bottom of the case) Video Output – HDMI 2.0 up to 4K @ 60 Hz Audio Output – HDMI, and optical S/PDIF Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n/ac USB – 2x USB 2.0 ports Tuner – Dual Digital TV Tuner (ATSC/T2); one for live watching, another for recording; EPG and PVR supported. Misc […]

November 23, 2016November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zidoo Releases Digital Signage SDK for X8 and X9S Android TV Boxes

Zidoo X9S and X8 are Android 6.0 + OpenWrt TV boxes powered by Realtek RTD1295 processor with HDMI input supporting PIP, UDP broadcasting and video recording, which works reasonably well despite some 4K video decoding limitations. The company has now released a “digital signage SDK” – which I’d rather just call a digital signage demo – working on either device on github, but you can still study the source code in order to build your own. Some of the possible features showcased in the demo include: Digital Signage (AD) player as shown above with video, picture and scrolling text Multi Views display (HDMI IN + Video playing + Web browsing) Multi Videos decode Screen rotation Screen zoom in / out Display output resolution switch HDMI IN player HDMI IN picture in picture (PIP) So it’s not a total solution, just an “SDK” showing what can be done with media files, and you’d still have to write your own app managing content updates (from storage or network), as well as some content management software. Two apks are used: […]

November 22, 2016November 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 401 Comments

WeTek Hub and WeTek Play 2 TV Boxes Giveaway

I may just have finished Giveaway Week at the beginning of the month with my own review samples, but I have three new devices to offer courtesy of WeTek who asked me whether I could organize a giveaway for two WeTek Hub and one WeTek Play 2 Android & OpenELEC TV boxes on CNX Software. For some reasons I’ve been unlucky with my attempted reviews of the two devices with my WeTek Hub review sample having severe stability issues, while my country’s customs office required time-consuming and expensive paperwork for WeTek Play 2, so I had to abandon the package. End of the day, I did not review either. Other reviewers were luckier, with – from what I’ve seen – positive reviews for both devices. For example, Mark Hodgkinson concluded his review of WeTek Hub on AV Forums as follows: The Wetek Hub is a well-designed little device, both inside […]

November 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 117 Comments

R-Box Pro 3G Android TV Box Review – Part 2: Android 6.0 Firmware

The vast majority of octa-core Android TV Boxes sold on the market comes with 2GB RAM, but Amlogic S912 based R-Box Pro TV box was interesting with its 3GB RAM option (aka R-Box Pro 3G), as I wondered if I would see any noticeable improvements during my tests with the extra RAM. We’ve already confirmed the the hardware comes with 3GB RAM using 2x 1GB + 2x 512MB RAM chips configuration in the first part of the review last month, and it’s now time to check out whether this translates to anything in Android, as well as go through the usual hard-to-get features to work like automatic frame rate switching and HD audio pass-through. First Boot, Firmware Update, and First Impressions One positive with the device is the four USB ports, so this time I did not need an USB hub at all, and connected a USB HDD, two RF […]