TV box News - Page 36 of 108 - CNX Software

March 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MeLE V9 4K Android TV Box Comes with a 3.5″ SATA Slot, a Cooling Fan

We’ve seen several devices based on Realtek RTD1295 processor. They all come with a SATA interface, either via an external connector like Zidoo X9S, a 2.5″ SATA bay like Beelink SEA I, or a 3.5″ SATA bay as found in Eweat R9 Plus. However, all those devices are fanless, and at least one person expressed concerns when using a device with an internal hard drive without active cooling. MeLE V9 fills that gap, as the RTD1295 TV box features a 3.5″ SATA slot and an active fan for cooling both the device and the hard drive. MeLE V9 specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash + 3.5″ SATA slot + SD/SDXC card slot Video I/O – HDMI 2.0a output up to 4K @ 60 Hz with 10-bit HDR support, AV port, and […]

March 25, 2017March 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Instreamer App Streams Zidoo X8/X9S/X10 HDMI Video Input to YouTube Live / RTMP Servers with FFmpeg

Zidoo X8, X9S and the upcoming X10, are TV boxes powered by Realtek RTD1295 processor with an HDMI input. The stock firmware already supports UDP broadcasting, but robbi5 decided he needed more, and designed Instreamer “HDMI IN Streamer” app leveraging work from Danman’s ZidoStream app for Mstar TV boxes and Zidoo’s own VideoAndHdmiIN app. Instreamer app supports the following: Streaming as MPEG-TS to network (unicast/multicast) Streaming in FLV format to RTMP server (e.g. Youtube) No need for intermediate recording file – thus no length limit Streaming runs in background HDMI out is usable as pass-through That looks good. Installation is easy. Download and install the latest Instreamer APK release Download and extract FFmpeg Android binaries to /mnt/sdcard You’ll be able to adjust a few video and audio settings after launching the app (not tested as I don’t have X9S anymore). You can now start a terminal, and stream HDMI input […]

March 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 115 Comments

Mecool KIII Pro Hybrid STB Review – Part 2: Android Firmware, TV Center, and DVB-T2 & DVB-S2 App

Last year I reviewed K1 Plus T2 S2, an Android TV box powered by Amlogic S905 quad core processor with DVB-T2 and DVB-S2 tuner support, which worked with some caveats. VideoStrong has now send me an updated model with Amlogic S912 octa-core processor, which I presented in the post entitled Mecool KIII Pro Hybrid Android STB Review – Part 1: Specs, Unboxing and Teardown, where I listed the specifications, and showed photos of the device and the boards (main board + tuner board). I’ve now had time to play with the device, and in many respects the user experience is very similar to the one I got with KI Plus T2 S2 models, but there are also some tweaks, and a few bugs which I’ll report in the second part of the review below. KIII Pro Hybrid TV Box Setup, Settings, & Power Consumption The four USB ports are really […]

March 19, 2017March 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Mecool KM8 P Amlogic S912 TV Box Runs Android 7.1 Nougat, Sells for $39 and Up

We’ve already written about Android 7.1 on Amlogic earlier with week with an overview of the system and SDK from a developer, and there were some issues and user interface inconsistencies. However, I’ve just seen GeekBuying is now taking order for Amlogic S912 powered Mecool KM8 P TV box running Android 7.1 for $38.99 and up. Mecool KM8 P specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 System Memory – 1 or 2GB DDR3 Storage – 8 or 16GB eMMC flash and micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and 3.5mm AV port (composite + stereo audio) Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n USB – 2x USB 2.0 ports Misc – IR receiver, status and network LEDs Power Supply – 5V/2A Dimensions – […]

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ACEMAX Sells Amlogic S905X TV Boxes with LibreELEC, or Dual Boot LibreELEC + Android 6.0

There are plenty of Android TV boxes powered by Amlogic S905X processor on the market, but ACEMAX has apparently decided to leverage the community’s work on LibreELEC, and launched two “ACEMAX LE” models with 1GB RAM/8GB flash or 2GB/16GB that runs LibreELEC sold on Aliexpress for respectively $39.99 and $57.99 shipped. You can also buy the second model with a dual boot Android 6.0 + LibreELEC firmware for $59.99 including shipping, instead of only running LibreELEC. The company uses both “OpenELEC”, “LibreELEC” and “Pure Linux”, but the video demo embedded at the end of this post shows clearly the box booting LibreELEC 7 with Kodi 16.1. ACEMAX LE TV box specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz with penta-core Mali-450MP GPU System Memory – Model 1: 1GB RAM; model 2: 2GB RAM Storage Model 1: 8GB eMMC flash + micro SD card slot Model […]

March 15, 2017March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$44 A5X Plus Mini TV Box Runs Android 7.1 on Rockchip RK3328 Processor

Rockchip introduced RK3328 processor for TV boxes at CES 2017. The processor is based on a quad core Cortex A53 processor and a Mali-450MP is some other competitors such as Amlogic S9xx series, but what made the processor stand out is that it already supports Android 7.1, and includes a USB 3.0 port. A5X Plus Mini is one of the first TV box based on the processor, and the first “Chinese” TV box I’ve seen running Android 7.x Nougat. A5X Plus mini specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP GPU System Memory – 1GB RAM Storage – 8 GB eMMC flash + micro SD card Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port with composite video and stereo audio Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, […]

March 6, 2017 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Mainline Linux on 64-bit ARM Amlogic SoCs, and TV Boxes such as Wetek Hub / Player 2, NEXBOX A1 / A95X, etc…

We’ve already seen Neil Armstrong, part of BayLibre, worked on adding Amlogic SoC (S905/S905X/S912) to mainline Linux via our virtual schedule for the Embedded Linux Conference & OpenIoT Summit 2017. But at the time, although we could see some activity in Linux 4.10 including support for Nexbox A95X and Nexbox A1, they did provide that much details the work that had been done, but since then, ELC 2017 videos have been released, and BayLibre wrote a short post about 3D Graphics support in mainline Linux. We can see that I/Os, USB host, composite video output, Ethernet, eMMC/SDIO, and PSCI and SCPI features have already been added to Linux 4.10. but some important features have not yet including HDMI, Mali support, Audio, and high speed eMMC modes. HDMI is actually planned for Linux 4.12, which could be released in about 18 weeks if we keep the 10 weeks kernel release schedule […]

March 1, 2017March 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 49 Comments

MINIX NEO U9-H Media Hub Review – Part 2: Android 6.0 Firmware & Kodi 17

MINIX NEO U9-H is the successor of MINIX NEO U1 media hub with an upgrade from four to eight cores with Amlogic S912 processor, as well as added support for VP9 and HDR. The company sent me a sample, and I’ve already checked out NEO U9-H hardware in the fist part of the review, so I’ll report by testing results in Android 6.0 and Kodi 17 in the second part. Since the user interface & many of the features have not changed, I’ll refer to MINIX NEO U1 review from time to time. First Boot, OTA Firmware, Settings and First Impressions I connected the MINIX A3 air mouse RF to one of the USB port, a USB 3.0 hard drive to another, and a USB hub to the last one with Tronsmart Mars G01 gamepad, a USB keyboard to take screenshots for the review, and a USB webcam. There’s also […]