TV box News - Page 34 of 108 - CNX Software

May 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Sen5 Amlogic S905D TV Box Review – Part 2: Android Firmware, Kodi 17, and DVB-T2 & S2 App

Sen5 is one of the first Android TV boxes powered by Amlogic S905D processor, and comes with two tuners (DVB-C/T/T2 and DVB-T/T2) with two demodulators that should allow for recording on one tuner, while watching the other, or recording two channels at the same time. We’ve already check out the hardware in the first part of the review, and seen a glimpse of the neat user interface, so today I’ll report about my experience with the device. Sen5 Android Set-Top Box First Boot, Setup Wizard, & First Impressions The STB comes with two USB ports so I used one for the hard drive, a necessity if you plan to use the PVR function, and connected a USB hub to the other with RF dongles for an air mouse and a gamepad, as well as a USB keyboard to take screenshots. I also connected Ethernet and HDMI cables, as well as […]

May 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Rockchip Android TV Boxes Promotion Starting at $13.99 (US Only)

GearBest is organizing a promotion for its US warehouse, and there are three good deals for TV boxes, especially with Rockchip RK3229 based SCISHION V88 going for $13.99 (limited to 30 units). Make sure you only buy one, as usually, the company will cancel orders with more than one piece for this type of promotion. If the 1GB RAM in V88 is too little for you, you may consider V88 Plus model with 2GB selling for $17.99, or Dolamee D5. There’s also a $10 discount$10 discount on Yundoo Y8 RK3399 TV Box. They also have some other discounts for 3D Printers, and drones/rc toys. All you need is a physical address in the US. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

May 10, 2017June 8, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Rockchip RK3328 Powered T98 4K Ultra HD TV Box Comes with 2GB RAM

We’ve already seen one of the first Rockchip RK3328 4K UHD TV boxes with A5X Plus Mini model now selling for $34.60, but with only 1GB RAM. There’s now another model called T98 with 2GB RAM, and mostly the same other specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP GPU System Memory – 2GB RAM Storage – 8 GB eMMC flash + micro SD card up to 32 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video + stereo audio) Audio Output – HDMI, AV, and optical S/PDIF Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – Fast Ethernet, 802.11 b/g/n WiFi (No Bluetooth) USB – 1x USB 2.0 port, 1x USB 3.0 port Misc – IR receiver, power LED Power Supply – 5V/2A Dimensions […]

May 8, 2017May 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 189 Comments

Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2 Tuners Sells for $80

VideoStrong has become popular among people wanting an Android TV box with a tuner thanks to their affordable and customizable products such as K1 Plus T2 S2, or KIII Pro coming with DVB-T/T2 and DVB-S/S2 tuners. AFAIK, all there products so far came with a single demodulator meaning you could watch or record satellite or terrestrial TV, but not do both at the same time, for example watching a channel via DVB-S2, and recording one via DVB-T2. Amlogic S905D is supposed to support this, and upcoming products like Sen5 Android set-top box do come with two demodulators. Mecool KI PRO – based on the processor – has just been launched, pre-selling for $79.99 on Banggood with shipping scheduled for mid May. Mecool KI Pro specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 2 GB DDR4 Storage – 16GB […]

May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

$97 MXQ HF10 Android Bluetooth Speaker & TV Box Works with Amazon Alexa

Last fall, I wrote about Eny Technology HF10, a 2-in-1 Android 6.0 TV box & Bluetooth speaker powered by Amlogic S905X processor, but at the time it was still under development, and we did not know all the features. The device has now been launched under the MXQ brand with support for Amazon Alexa voice service, and is up for pre-order for $96.55 on GearBest. MXQ HF10 specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 128 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio HDMI output 2.5″ 10W mono bass speaker with class-D amplifier Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 1x USB 2.0 host port Misc – Power & Play/Pause combo button, […]

May 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Yundoo Y8 Rockchip RK3399 mini PC Review – Part 2: Android Firmware, Audio & Video Playback in Kodi

Yundoo Y8 is one of the first Android TV boxes / mini PCs powered by Rockchip RK3399 hexa-core processor to be launched. GearBest sent me a review sample, and since I’ve already taken it apart in the first part of the review, I’ll report my experience with the firmware in terms of stability and performance, as well as audio & video capabilities with TVMC (Kodi fork), and more. First Boot, Setup, and First Impressions I’ve first connected a few peripherals Seagate USB 3.0 drive to the USB port, a USB keyboard to one of the USB 2.0 port, and a USB hub to the other one with two USB RF dongles for MINIX NEO A2 Lite air mouse, and Tronsmart Mars G01 gamepad. After adding Ethernet and HDMI cable, I pressed the power button on the unit to start it up. Please note that the remote control cannot turn on […]

April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

$24 Sunvell R69 Android 4.4 TV Box is Powered by Allwinner H2 Processor

We’ve fist seen Allwinner H2(+) quad core Cortex A7 processor in cheap development boards such as Orange Pi Zero, but the processor main market is actually “Basic OTT TV boxes” for 1080p video playback, and Sunvell R69 TV box is one of the first of those, and comes with 1GB RAM & 8GB storage. Sunvell R69 TV box specifications: SoC – Allwinner H2 quad core Cortex A7 processor @ up to 1.5 GHz (TBC) with Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD slot up to 32GB Video & Audio Output – HDMI 1.4 output up to 1080p60, AV port (composite video + stereo audio) Video Codec – H.265 / H.264 up to 1080p Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi (via XR819 chipset) USB – 2x USB 2.0 ports Power Supply – 5V/2A Dimensions – 9 x 9.5 x 1.8 cm Weight – […]

April 25, 2017April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SDMC DV8230-AP LTE is an Android 7.0 TV Box with a 4G LTE Router Module

Shenzhen SDMC Technology launched DV8219-LTE Android TV box with 4G modem powered by Amlogic S905X processor a while ago, and the company is back with a new model called DV8230-AP LTE with the same processor, but running Android 7.0, and what they call a “4G LTE router function”. SDMC DV8230-AP LTE specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 2GB DDR3 RAM Storage – 8GB eMMC flash (4 to 64GB as option) + micro SD card slot Video Output – HDMI 2.0a, 3.5mm AV port Audio Output – HDMI, AV, optical S/PDIF Connectivity 10/100M Ethernet port 802.11 b/g/n WiFi (Dual band optional) Optional Bluetooth 4.0 Built-in 4G Module + SIM card slot 2x dBi external antennas USB – 2x USB 2.0 ports Misc – IR receiver; LEDs; standby key; reset button; WPS button Power Supply – […]