TV box News - Page 23 of 108 - CNX Software

April 11, 2018January 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

4K ATV Stick Looks like the Offspring of ChromeCast and FireTV Stick 2017 with a Big “G” Logo

A new Android TV device has shown up on the FCC website, and generated quite a lot of buzz last time online with the source of the story originating from Reddit or Ausdroid, and picked up by many blogs because the device comes with a “G” logo that looks like the one Google might use… But in all likelihood it should just be another TV stick running Android TV OS, and the FCC listing has been submitted by Shenzhen SEI Robotics, an Android TV box manufacturer. The device is based on Amlogic S905X processor with 2GB RAM, and looks like a mix between the ChromeCast and Amazon FireTV 2017 with its short built-in HDMI cable and rounded shape. Hardware specifications: SoC- Amlogic S905X quad core Cortex A53 processor with Arm Mali-450MP GPU System Memory – 2GB RAM Storage – 8GB eMMC flash Video & Audio Output – HDMI 2.0a with […]

April 9, 2018April 29, 2018 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

MX10 May Be the First TV Box to Run Android 8.1 “Oreo”

Android 8.0 “Oreo”was launched in August 2017 for smartphones and tablets, and it normally takes some time before the operating system is ported to TV boxes. So far, I had no seen any boxes running Android 8.x, but today I’ve come across MX10 TV box based on Rockchip RK3328 processor, that’s said to run Android 8.1 “Oreo”. MX10 TV box specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor with Arm Mali-450MP GPU System Memory – 4GB DDR4 RAM Storage – 32GB eMMC flash + SD card slot Video Output – HDMI 2.0a up to 4K 60Hz with HDR support + 3.5mm AV port (composite) Audio Output – Via HDMI, AV port (stereo audio), coaxial S/PDIF output Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi USB – 1x USB 3.0 port, 3x USB 2.0 ports Power Supply – 5V2A Dimensions – The box ships with a power adapter, a remote […]

April 4, 2018April 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Ugoos UT5 Pro is a Rockchip RK3399 based TV Box with a 3.5″ SATA Bay

It’s already possible to connect a 3.5″ SATA drive to Rockchip RK3399 based hardware with products like Vorke Z3 TV box exposing an external SATA connector, or development boards such as ODROID-N1, Orange Pi RK3399, or Firefly AIO-3399J. None of those solutions offers a neat way to store your hard drive, so you’d have cables and the drive exposed to dust, unless you make your own case. Ugoos UT5 Pro TV box offers an easier way to neatly connect a 3.5″ SATA drive since it includes an internal SATA slot. The device also features a USB 3.0 device port allowing user to connect the box directly to their computer to transfer files. Ugoos UT5 Pro specifications: SoC – Rockchip RK3399 dual core Cortex-A72 + quad core Cortex-A53, Arm Mali-860MP4 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11 System Memory – 4GB DDRIII-2133 (2GB option) Storage 32GB eMMC flash (optional:16/32/64GB) […]

March 27, 2018March 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Google Has Made it Harder to Load Google Apps on Uncertified Devices

Cheap TV boxes or development boards that can run Android, are not normally certified by Google, but you can still use Google Apps like the Google Play Store either directly with the manufacturer pre-loading the packages on the device, or manually by installing the packages yourself. According to a report by XDA developers, Google has made it harder to load Gapps on uncertified devices starting from March 16th, and if you try to login on a new custom firmware you may get the message “Device is not certified by Google” when accessing a Google app. The change will apparently only affect newly built firmware , so older firmware should still be able to access Google Play store (TBC). We’ll have to see how it turns out. Google Play Services is said to check ro.build.fingerprint for the build date, but it seems too easy to work around this, if that’s the […]

March 26, 2018March 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Rockchip RK3128 based EMISH X700 Smart TV Box is Selling for $16.99 (Promo)

GearBest has another time and stock limited promotion with a low cost TV box, namely “EMISH X700 Smart TV Box” going for $16.99 shipped with coupon GB4X7. EMISH X700 (RH46BUS) TV box specifications: SoC – Rockchip RK3128 quad core Arm Cortex-A7 processor @ up to 1.2GHz with Mali-400MP2 GPU System Memory – 1GB RAM Storage – 8GB eMMC flash, micro SD card slot up to 16GB Video Output – HDMI 1.4a up to 1080p60, composite RCA port Audio Output – Optical S/PDIF, HDMI and stereo audio RCA connectors Video Codecs – H.265, H.264 and others up to 1080p60 Connectivity – 10/100M Ethernet, dual band 802.11 a/b/g/n/ ac WiFi USB – 2x USB 2.0 host ports Misc – IR receiver Power Supply – 5V / 2A Dimensions – 18 x 12 x 2.5 cm Weight – 170g The box runs Android 4.4, and ships with an IR remote control, a power adapter, […]

March 20, 2018March 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

X99 Android TV Box is Based on Rockchip RK3399 Processor, Equipped with a SIM Card Slot

We’ve previously seen a fair amount of TV boxes / mini PCs based on Rockchip RK3399 processor like Yundoo Y8 or Vorke Z3, which perform very well for tasks like web browsing and gaming, but required more work when it comes to video playback, at least in 2017 when I reviewed the devices. X99 is another one of those TV boxes with RK3399 SoC, 4GB RAM, 32GB storage, HDMI 2.0 output, Gigabit Ethernet, and so on, but interestingly enough it adds a SIM card slot too. The photo above appears to show a modem module close to the SIM card, but somehow none of the website explains which type (2G/3G/4G) of modem that is in X99 TV box specifications: SoC – Rockchip RK3399 hexa core processor with 2x ARM Cortex A72 cores @ up to 1.8 GHz, 4x ARM Cortex A53 cores, Mali-T860MP4 GPU System Memory – 4GB DDR3 Storage […]

February 19, 2018February 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

VideoStrong Introduces Low Cost Version of KI Plus T2 S2 Hybrid Android TV Box with Amlogic S805X Processor

VideoStrong K1 Plus T2/S2 is an Android 5.1 set-top-box with DVB-S/S2 and DVB-T/T2 tuner that was launched roughly two years ago with Amlogic S905 quad core processor. Since then, the company has now launched variant of the model with Amlogic S912 (e.g. KIII Pro hybrid TV box) or Amlogic S905D (e.g. KI Pro set-top box) processors. But now, provided the information on Alibaba is correct, the company has launched a new version of KI Plus T2/S2 with Amlogic S805X which should be cheaper, run a more recent Android 7.1 operating system, at the cost of losing support for 4K decoding, since the processor only support Full HD (1080p60) decoding at most. Since the company updated an existing product, some specific details are wrong on Alibaba, but KI Plus T2 S2 (2018) specifications should be as follows: SoC – Amlogic S805X quad core ARM Cortex-A53 @ up to 1.2 GHz with […]

February 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

MX Pro 4K is an Android 7.0 TV Box powered by Allwinner H5 Processor

We’ve already seen Allwinner H5 processor in several development boards such as NanoPi NEO2, Orange Pi Zero Plus, or Libre Computer Tritium 2G among other. But while the processor has been designed for 4K OTT TV boxes, I had not seen any TV box based on the processor so far. MX Pro 4K, not to be confused by MXQ Pro 4K, changes that, as it features the quad core Cortex A53 processor combined with 1GB RAM, 8GB storage, and the usual HDMI, Ethernet, USB ports you’d expect from a TV box. MX Pro 4K specifications: SoC – Allwinner H5 quad core Cortex A53 processor with hexa-core Mali-450MP4 GPU System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash (options: 4GB, 16GB, 32GB), micro SD card slot Video Output – HDMI 1.4b up to 4K @ 30 Hz, AV port (composite) Audio Output – HDMI, AV (stereo audio), and […]