tronsmart

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linux 4.18 Release – Main Changes, Arm and MIPS Architecture

Linux 4.18 Release – Main Changes, Arm and MIPS Architecture

Linux Changelog 4.18

Linus Torvalds has just announced the release of Linux 4.18: One week late(r) and here we are – 4.18 is out there. It was a very calm week, and arguably I could just have released on schedule last week, but we did have some minor updates. Mostly networking, but some vfs race fixes (mentioned in the rc8 announment as “pending”) and a couple of driver fixes (scsi, networking, i2c). Some other minor random things (arm crypto fix, parisc memory ordering fix). Shortlog appended for the (few) details. Some of these I was almost ready to just delay to until the next merge window, but they were marked for stable anyway, so it would just have caused more backporting. The vfs fixes are for old races that  are really hard to hit (which is obviously why they are old and weren’t noticed earlier). Some of them _have_ been seen in real […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on Linux 4.15 Release – Main Changes, Arm and MIPS Architectures

Linux 4.15 Release – Main Changes, Arm and MIPS Architectures

Linus Torvald has released Linux 4.15 last Sunday: After a release cycle that was unusual in so many (bad) ways, this last week was really pleasant. Quiet and small, and no last-minute panics, just small fixes for various issues. I never got a feeling that I’d need to extend things by yet another week, and 4.15 looks fine to me. Half the changes in the last week were misc driver stuff (gpu, input, networking) with the other half being a mix of networking, core kernel and arch updates (mainly x86). But all of it is tiny. So at least we had one good week. This obviously was not a pleasant release cycle, with the whole meltdown/spectre thing coming in in the middle of the cycle and not really gelling with our normal release cycle. The extra two weeks were obviously mainly due to that whole timing issue. Also, it is […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linux 4.9 Release – Main Changes, ARM and MIPS Architectures

Linux 4.9 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux 4.9 on Sunday: So Linux 4.9 is out, and the merge window for 4.10 is thus open. With the extra week for 4.9, the timing for the merge window is obviously a bit awkward, and it technically closes in two weeks on Christmas Day. But that is a pure technicality, because I will certainly stop pulling on the 23rd at the latest, and if I get roped into Xmas food prep, even that date might be questionable. I could extend the merge window rather than cut it short, but I’m not going to. I suspect we all want a nice calm winter break, so if your stuff isn’t ready to be merged early, the solution is to just not merge it yet at all, and wait for 4.11. Just so you all know (I already bcc’d the main merge window suspects in a separate mailing last […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 79 Comments on LibreELEC 8 for Intel Atom Bay Trail and Cherry Trail Devices with 32-bit UEFI Binary

LibreELEC 8 for Intel Atom Bay Trail and Cherry Trail Devices with 32-bit UEFI Binary

LibreELEC, a fork of OpenELEC, was announced several months ago, and images for various hardware platform were released in that time period. However, support for Intel Bay Trail and Cherry Trail platforms using a 32-it UEFI binary might not have always work, or was more difficult to install. piotrasd has now created a LibreELEC 8 + Kodi 17 beta 3 build especially for this type of devices, and tested it on Tronsmart Ara IZ37 Bay Trail mini PC. However, it should work on other Intel Atom Z3735F or Intel Atom x5/z7 mini PC or sticks with a 32-bit UEFI bootloader. If you have such device, you can try it the following instructions using a USB flash drive: Download and install Rufus or LibreELEC SD USB creator Download and unpack LibreELEC 8 32-bit UEFI image file Launch your USB creator program, select the firmware file, and make a bootable USB flash […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Using M12N Android Amlogic S912 TV Box as a Game Console (Video)

Using M12N Android Amlogic S912 TV Box as a Game Console (Video)

When Amlogic announced S912 processor, they mentioned it would target not only 4K OTT and IP set-top boxes, but also gaming consoles thanks to a faster and better Mali-T820MP3 GPU compared to the Mali-450MP GPU found in their previous S905 and S805 processor, and we’ve already seen that S912 is indeed faster in 3D benchmarks. So I decided to play several games to show the performance, the pre-loaded retro gaming app, and for people who have never used a TV box to play games show what it looks like, and how to play using M12N TV box, in conjunction with MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 wireless gamepad. I played four games downloaded from the Play Store or Amazon Underground: Candy Crush Saga with air mouse Beach Buggy Racing and Riptide GP2 with the gamepad Dead Trigger with the air mouse in menus, and the gamepad […]

Posted on by Karl Johnson - 116 Comments on How to Customize Amlogic Android Firmware – A Tutorial with NEXBOX A95X (S905) TV Box

How to Customize Amlogic Android Firmware – A Tutorial with NEXBOX A95X (S905) TV Box

CNXSoft: Bear in mind that there are multiple versions of Nexbox A95X. Yesterday, I published the review of Nexbox A95X with Android 6.0, with the model based on Amlogic S905X processor. In this article, Karl had a look at Nexbox A95X with Amlogic S905 processor, which he purchased a couple of months ago, but since he was not happy with the Android 5.1 firmware, he decided to customize it. Karl here with a review of the Nexbox A95X S905 box. This took a while to even start. I received the box about 2 months ago and I dived right in and broke it. I didn’t have factory firmware, and wasn’t cautious enough and bricked it. I found some firmware that worked but it didn’t work very well for me. Email’s to Nexbox directly didn’t help and I was stuck with a bricked box… I later found someone who had factory […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linux 4.6 Release – Main Changes, ARM and MIPS Architectures

Linux 4.6 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.6 earlier today: It’s just as well I didn’t cut the rc cycle short, since the last week ended up getting a few more fixes than expected, but nothing in there feels all that odd or out of line. So 4.6 is out there at the normal schedule, and that obviously also means that I’ll start doing merge window pull requests for 4.7 starting tomorrow. Since rc7, there’s been small noise all over, with driver fixes being the bulk of it, but there is minor noise all over (perf tooling, networking, filesystems,  documentation, some small arch fixes..) The appended shortlog will give you a feel for what’s been going on during the last week. The 4.6 kernel on the whole was a fairly big release – more commits than we’ve had in a while. But it all felt fairly calm despite that. Linux 4.5 added […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 35 Comments on HDMI Audio in Linux is Now Working on Cherry Trail mini PCs, OpenELEC 7.0 Image Released

HDMI Audio in Linux is Now Working on Cherry Trail mini PCs, OpenELEC 7.0 Image Released

Since Intel has decided not to officially support Bay Trail and Cherry Trail processors in Linux, and focus on other priorities, people who have tried to use HDMI audio in Linux with mini PCs or TV sticks based on the processors have always had issues. There’s a workaround for Bay Trail mini PCs with Linux 3.16 kernel, but so far I’ve never seen a Cherry Trail system working with HDMI audio in Linux. Luckily, Pierre-Louis Bossart has been working on support, and Piotr kasprzak has tried HDMI audio support with OpenELEC 7.0 and a patched Linux Kernel 4.5.1, and confirmed it to be working on Tronsmart Ara X5 Plus and Wintel 10 Pro mini PC powered by Intel Atom x5-Z8300 processor. This can also be verified in the kernel log with dmesg:

If you want to try it yourself, you can download the OpenELEC image with the modifications. If […]

Exit mobile version
UP 7000 x86 SBC