texas instruments News - Page 3 of 15 - CNX Software

March 25, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

M2.COM is a Standard for IoT Sensors Based on M.2 Form Factor

The IoT ecosystem really feels like a jungle now, not because of a lack of standards, but because everybody thinks about doing their own, so we’ve ended up with a wide range of communication protocols, initiatives, and consortia, and it will take some time until the winners and losers are sorted out. One the of the latest standard is M2.COM platform form factor for sensors that “adopts the standardized M.2 form factor and is defined as an evolutionary module that combines general wireless connectivity with additional built-in computing ability powered by MCU”. M2.COM architecture diagram above describes both software and hardware requirements, but the specifications themselves only define the form factor, as well as mechanical and electrical characteristics: Consistent with M.2 standard Module size: 22 mm x 30 mm PCB thickness: 0.8 mm ± 10% Pin count: 75 pins Module input voltage: 3.3V DC-in Connector mating force: 30N Maximum Connector […]

January 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Texas Instruments 4K DLP Chip Should Bring Affordable 4K Projectors to the Home, Office and School

4K Ultra High Definition (UHD) is slowly with the price of 4K television going down, 4K media players flooding the market starting at $40, and 4K content appearing online via services like Netflix and over the air with DVB-S2. Thanks to the latest Texas Instruments DLP 0.67″ digital micromirror device (DMD), a cost down version of the 1.38″ DMD used in around 80% of cinemas worldwide, we could start seeing affordable 4K projectors in the second half of 2016. The chip includes 4 millions tiny mirrors that quickly switch to generate the ~8 millions pixels required by a 3840×2160 display, and should be found in projectors capable of delivering up to 5,000 lumens. The DLP chip can be used in home theaters, but also in the office and at school for presentations or courses were text needs to be easily readable. The solutions should delivery 100″+ displays with sharp images […]

January 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Texas Instruments MSP432 LaunchPad Development Board Sells for $4.32 (Promo)

Texas Instruments has started the year by offering a deal on their 32-bit MSP432 LaunchPad Development Kit, dropping the cost from $12.99 to $4.32 for a limited time with coupon code 432@432. MSP432 Launchpad’s key features: MCU – Texas Instruments MSP432P401R ARM Cortex M4F MCU @ 48 MHz with FPU and DSP, 256KB flash, 64KB RAM Expansion – 40 pin BoosterPack Connector, and support for 20-pin BoosterPacks Misc – 2 buttons and 2 LEDs for user interaction Debugging – Back-channel UART via USB to PC, Onboard XDS-110ET emulator featuring EnergyTrace+ Technology Power – Micro USB connector The kit includes the board, micro USB cable and a quick start guide. There’s plenty of technical documentation for the board, although for some unknown reasons, I can’t download any PDF documents from TI website tonight. The coupon is still working, but free shipping on TI eStore seems to be a thing of the […]

December 20, 2015December 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Sitara AM335x processor are designed by industrial applications, and found in develompent board such as BeagleBone Black or BeagleBone Green, and the company has recently launched the new Sitara AM3351 Cortex A8 processor without 3D GPU, no PRU just like AM3352, but they’ve also canned the two CAN interfaces (sorry, I had to) in order to bring the cost lower, while keeping the processor software and pin-to-pin compatible with other AM335x processors available in 13×13 mm package. TI Sitara AM3351 CPU clock will also be limited to 300 MHz to 600 MHz with respectively AM3351BZCE30 and AM3351BZCE60 parts. It will only come with one Gigabit Ethernet port instead of up to two ports of other members of the family that are produced in 15x15mm package, and temperature range is limited to 0 to 90 C. Other features remain the same, and the processors will support TI-RTOS, Linux, Android, […]

December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

TI SimpleLink CC1310 Wireless MCU Promises 20 Km Range, 20-Year Battery Life on a Coin Cell

Some LPWAN standards such as SigFox, LoRa, or nWave allows for transmission of data at low bitrate over several kilometers, and I’ve very recently featured Microchip’s LoRa modules and motes in this blog. So when Texas Instruments sent their December 2015 newsletter entitled Wireless MCU spans 20 km on a coin cell, I decided to have a look, and the company’s CC1310 wireless Cortex-M3+M0 MCU based on a proprietary sub GHz technology also claims to last 20-year on a coin cell for applications such as grid communication infrastructure and heat and water meters. SimpleLink CC1310 key features: Microcontroller – ARM Cortex-M3 @ up to 48 MHz with up to 128KB programmable flash, 8KB DRAM for cache/general purpose, 20KB Ultralow Leakage SRAM Sensor Controller – Ultralow power and autonomous; 16-Bit Architecture; 2KB of Ultralow Leakage SRAM for code and data RF core Cortex M0 core with 4KB RAM, and ROM Data […]

October 10, 2015October 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$249 TI AM437x Starter Kit for Industrial Design Launched by Element14

Element14 has recently launched their “Texas Instruments AM437x Starter Kit” based on Sitara AM4378 Cortex A9 processor, including a board and touch screen LCD, and targeting industrial, HMI (Human Machine Interface) and networking applications. Element14 Texas Instruments AM437x Starter Kit specifications: SoC – Texas Instruments Sitara AM4378 ARM Cortex A9 processor @ 1 GHz with PowerVR SGX530 GPU System Memory – 1GB DDR3L SDRAM (2x 4-Gb Micron chips). Storage – 64MB SPI NOR Flash (MX66L51235FMI), serial EEPROM with board specific data, 1x micro SD slot Display – 4.3″ Capacitive Touch LCD Connectivity – 2x 10/100/1000M Ethernet RJ45 ports (Micrel KSZ9031RN transceivers), support for COM8 form-factor wireless boards via J20 Samtec card edge connector. USB – 1x USB 2.0 host port, 2x micro USB ports Camera – 2x 12 header for custom-made camera module from TI Audio – TLV320AIC3106 audio codec, 2x audio jacks for headphone out, and Line In Sensors […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

WiPy Wi-Fi Board for IoT Runs MicroPython on Texas Instruments CC3200 (Crowdfunding)

If you’ve interested in connecting devices via Wi-Fi, you’re being spoiled as “Internet of things” boards keeps getting designed and produced. The latest board with WiPy, a small board powered by Texas Instruments CC3200, running MicroPython, and consuming less than 1mA in suspended mode with Wi-Fi connected. WiPy specifications: MCU – TI CC3200 ARM Cortex-M4 @ 80 MHz with 256KB RAM, Wi-Fi and TCP/IP stack Storage – 2MB flash Connectivity – WiFi 802.11b/g/n 16Mbps (AP, Station and WiFi-Direct), on-board antenna and u.FL connector Expansion – 2x 14-pin headers (2.54mm pitch) with Up to 25 GPIOs 2x UART, SPI, I2C, I2S, and SD card 3×12 bit ADCs Others 4×16 bit timers with PWM and input capture RTC Hash and encryption engines: SHA, MD5, DES, AES Reset switch, heartbeat LED Power Supply – 3.6 – 5.5V DC input; 3.3V output up to 250mA Power Consumption – Active: 14 mA; Suspended (Wi-Fi connected): […]

March 25, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Introduces MSP432 ARM Cortex-M4F MCU Family

Texas Instruments has just launched a successor for its 16-bit MSP430 MCU family with MSP432 MCU series featuring a 32-bit ARM Cortex-M4F core, a DSP, up to 256 KB flash, up to 64 KB SRAM, and according to the company ” delivering a ULPBench score of 167.4 outperforming all other Cortex-M3 and -M4F MCUs on the market”. The new MCU family targets consumer & portable electronics, building & factory automation & control, smart grid & energy, healthcare & fitness, and wearables applications. Key features listed for MSP432P4xx: MCU – 32-bit ARM Cortex-M4F up to 48 MHz with FPU and DSP. Delivers 3.4 Coremark/MHz Memory – Up to 64 KB RAM; Selectable RAM retention Storage – Up to 256 KB Flash; dual bank for simultaneous reading and writing Security – 256-bit AES encryption, JTAG access lock, 4 IP Protection regions EnergyTrace Technology Real-time power measurement and debugging Generate application energy profiles including […]