tanix News - CNX Software - Embedded Systems News

July 15, 2024July 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 6.10 Release – Notable changes, Arm, RISC-V, and MIPS architectures

Linux Torvalds has announced the release of Linux 6.10 on LKML: So the final week was perhaps not quote as quiet as the preceding ones, which I don’t love – but it also wasn’t noisy enough to warrant an extra rc. And much of the noise this last week was bcachefs again (with netfs a close second), so it was all pretty compartmentalized. In fact, about a third of the patch for the last week was filesystem-related (there were also some btrfs latency fixes and other noise), which is unusual, but none of it looks particularly scary. Another third was drivers, and the rest is “random”. Anyway, this obviously means that the merge window for 6.11 opens up tomorrow. Let’s see how that goes, with much of Europe probably making ready for summer vacation. And the shortlog below is – as always – just the last week, not some kind […]

March 21, 2022March 22, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 5.17 release – Main changes, Arm, RISC-V, and MIPS architectures

Linus Torvalds has just released Linux 5.17: So we had an extra week of at the end of this release cycle, and I’m happy to report that it was very calm indeed. We could probably have skipped it with not a lot of downside, but we did get a few last-minute reverts and fixes in and avoid some brown-paper bugs that would otherwise have been stable fodder, so it’s all good. And that calm last week can very much be seen from the appended shortlog – there really aren’t a lot of commits in here, and it’s all pretty small. Most of it is in drivers (net, usb, drm), with some core networking, and some tooling updates too. It really is small enough that you can just scroll through the details below, and the one-liner summaries will give a good flavor of what happened last week. Of course, this means […]

August 30, 2021October 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Linux 5.14 Release – Main changes, Arm, MIPS, and RISC-V architectures

Linus Torvalds has just announced Linux 5.14 release which happens to almost coincide with the anniversary of the initial announcement of the “small” project on August 25, 1991, about 30 years ago. Here’s Linux 5.14’s announcement: So I realize you must all still be busy with all the galas and fancy balls and all the other 30th anniversary events, but at some point you must be getting tired of the constant glitz, the fireworks, and the champagne. That ball gown or tailcoat isn’t the most comfortable thing, either. The celebrations will go on for a few more weeks yet, but you all may just need a breather from them. And when that happens, I have just the thing for you – a new kernel release to test and enjoy. Because 5.14 is out there, just waiting for you to kick the tires and remind yourself what all the festivities are […]

February 20, 2019May 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Tanix TX6 Allwinner H6 TV Box Gets Android 9.0 Firmware

The first Android 9.0 TV boxes appeared a few months ago in some Rockchip RK3328 based models, Amlogic also showcased Android 9 Pie in S905X2 / S905Y2 TV box reference platforms, but so far I don’t think I had heard about Android 9.0 for Allwinner processors. But GeekBuying and Aliexpress are now listing Wechip / Tanix TX6 Allwinner H6 TV box previously launched with Android 7.1, with Android 9.0 Pie instead for $39 and up. Here’s a reminder of Tanix TX6 hardware specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K […]

November 13, 2018November 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Tanix TX6 Allwinner H6 4K TV Box with 4GB RAM, Dual Band WiFi Goes for $43 (Promo)

Low cost Allwinner H6 TV boxes are now a thing, after the $40 EACHLINK H6 Mini TV box we covered last month, here’s another model slightly more expensive but with 4GB RAM instead of 3GB, and dual band WiFi. It does however drops the AV port found in EACHLINK model. Tanix TX6 can now be found on GearBest or Banggood for $42.99 and up. Tanix TX6 specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K @ 30 fps VP9 Profile 0/2, up to 4K @ 30fps H264/AVC BP/MP/HP@level5.1, MVC, up to […]

October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Linux 4.19 Release – Main Changes, Arm and MIPS Architectures

With Linus Torvalds taking a leave from the Linux kernel project, Greg Kroah-Hartman was the one to release Linux 4.19 last Sunday: Hi everyone! It’s been a long strange journey for this kernel release… While it was not the largest kernel release every by number of commits, it was larger than the last 3 releases, which is a non-trivial thing to do. After the original -rc1 bumps, things settled down on the code side and it looks like stuff came nicely together to make a solid kernel for everyone to use for a while. And given that this is going to be one of the “Long Term” kernels I end up maintaining for a few years, that’s good news for everyone. A small trickle of good bugfixes came in this week, showing that waiting an extra week was a wise choice. However odds are that linux-next is just bursting so […]

July 4, 2018July 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Top 10 Best Selling TV Boxes (on GearBest)

I’ve already written articles such as the “Best Android TV boxes in 2018” to help people select a TV box that matches their requirements, but today it will be a little different. GearBest provides a speadsheet with discount and coupons to bloggers and YouTube reviewers (sadly not shareable link here), and this time I noticed they also list the top 10 best sellers in the TV box category. Those may not necessarily the best TV boxes, but at least many other people bought them, and you may get unofficial support via communities such as Freaktab or LibreELEC. Withoutany further delay, here’s the list in no particular order and with prices for reference only as listed in the spreadsheet: Mecool M8S PRO L 4K TV Box (Buy Link) – Amlogic S912, 3GB RAM, 32GB flash, Android 7.1 – $75.99 W95 TV Box (2GB) (Buy Link) – Amlogic S905W, 2GB RAM, 16GB flash, […]

August 14, 2017August 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Tanix TX3 Mini TV Box is Powered by Amlogic S905W SoC

So it looks like Amlogic has outed another SoC with Amlogic S905W processor that appears to be a cost down version of Amlogic S905X limited to 4K @ 30 fps video decoding. One of the first device to used the new processor is Tanix TX3 mini TV box that should be priced similarly to Rockchip RK3229 devices. Tanix TX3 mini specifications: SoC – Amlogic S905W quad core ARM Cortex-A53 @ up to 1.5 GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB/2GB DDR3 Storage – 16GB eMMC flash + micro SD card slot Video Output – HDMI 2.0 output, AV port (composite) Audio – HDMI, optical S/PDIF, AV port (stereo audio) Video Codecs – 4K@30fps H.265, MPEG1/2/4, H.264, HD AVC/VC-1, RM/RMVB, Xvid/DivX3/4/5/6 , RealVideo8/9/10 Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi USB – 2x USB 2.0 host ports Misc – IR receiver, front panel LCD display Power Supply – 5V/2A […]