tablet News - Page 6 of 58 - CNX Software

May 13, 2021May 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$300 NANOTE P8 is a 7-inch mini laptop with an Apollo Lake processor

NANOTE P8 is an affordable mini laptop powered by an Intel Pentium N4200 Apollo Lake processor coupled with 8GB RAM, 64GB storage, and equipped with a 7-inch Full HD display. While there are now plenty of mini laptops from companies like GPD or One Netbook they tend to be relatively pricey as they offer hardware with specifications suitable for gaming. Nanote mini laptop launched last year offered a low-cost option for $185, but with an Atom x5 Cherry Trail processor performance was really on the low-side, and the new Nanote P8 offers a mid-range option so-to-speak. NANOTE P8 (UMPC-02-SR) specifications: SoC – Intel Pentium N4200 quad-core Apollo Lake processor @ 1.1 / 2.5 GHz (Turbo) with 2MB cache, Intel HD 505 graphics; 6W TDP System Memory – 8GB RAM Storage – 64GB eMMC flash, MicroSD card slot Display – 7-inch touchscreen display with 1920×1200 resolution, 360-degree hinge Video Output – […]

May 9, 2021May 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

JingPad A1 Arm Linux 2-in-1 tablet can run Android apps (Crowdfunding)

If you are looking for an Arm Linux tablet option are limited with, for instance, the Allwinner A64 powered 10.1-inch PineTab tablet or the CutiePi tablet with a Raspberry Pi CM4 module. If you’d like more performance, the upcoming JingPad A1 2-in-1 tablet might be an option worth looking into. The 11-inch 2K tablet features an octa-core Cortex-A75/A55 processor, coupled with 6GB RAM and 128GB storage, and can be transformed into a laptop with an optional detachable keyboard. JingPad A1 runs the company’s JingOS optimized for tablets, and which also happens to be able to run Android apps. JingPad A1 specifications: SoC – Unnamed octa-core processor with 4x Arm Cortex-A75 CPU cores @ 2 GHz, 4x Arm Cortex-A55 CPU cores @ 1.8 GHz, Imagination PowerVR GM9446 GPU @ 800 MHz. (I can’t find an exact match, but if it looks similar to MediaTek Helio P90 except the configuration is 2x […]

March 22, 2021March 22, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

CutiePi tablet gets a Raspberry Pi CM4 upgrade

CutiePi tablet was launched on Kickstarter last year with a Raspberry Pi Compute Module 3+ Lite, an open-source hardware carrier board, and an 8-inch multi-touch display with 1280×800 resolution. Shipping to backers is about to start, but the company has already started working on a new version of the CutiePi Tablet with the Raspberry Pi CM4 module released last October. This will enable greater performance and more memory with the tablet shipping with a 2GB RAM CM4 module by default. CutiePi CM4 tablet preliminary specifications: SoM – Raspberry Pi Compute Module 4 Lite with Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz, 2GB RAM Storage – MicroSD card slot Display – 8-inch 5-point multi-touch IPS LCD with 1280×800 resolution Video Output – Micro HDMI Audio – 2W 8Ohm speaker, audio amplifier, built-in microphone Camera – 5MP front-facing camera (OV5647) Connectivity – Dual-band 802.11 b/g/n/ac WiFi 5 and Bluetooth 5.0 USB […]

January 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Pipo W12 Arm Windows 10 Laptop finally launched for $422 and up

Pipo showcased a Snadragon 850 powered 2-in-1 laptop in fall 2019, and said it expected it to sell for around $400. But it appears it took quite longer than expected to launch the Arm Windows 10 laptop, and only now can we see PiPo W12 laptop sold on Aliexpress for around $422 and up plus shipping. The 2-in-1 laptop comes with a 12.3-inch touchscreen display, 4GB or 8GB RAM, 256GB storage, as well as WiFi 5, Bluetooth 5.0, and 4G LTE connectivity. Pipo W12 specifications have changed a little bit since the first announcement, notably the display resolution, and we’ve got a few more details: SoC – Qualcomm Snapdragon 850 octa-core Kryo 385 Arm cores clocked @ up to 2.96 GHz with Adreno 630 Visual Processing Subsystem, Hexagon 685 DSP System Memory – 4GB or 8GB DDR4 RAM Storage – 256GB flash storage, MicroSD card slot Display – 12.3″ IPS […]

October 31, 2020October 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Allwinner A133 tablet processor pairs with XR829 or AW859A WiFi & Bluetooth chip

Last year, Allwinner published an updated roadmap for tablet processors that included A100, A200, and A300 SoC’s. None of those have been launched yet, but I’ve just noticed the Allwinner A133 quad-core Cortex-A53 processor showed up on the company’s website. That’s yet another entry-level processor coupled with a PowerVR GE8300 GPU, but you’d get support for Android 10, instead of the older Android 7.1/8.1 SDK provided for the earlier Allwinner A-series tablet processors. This time around, the company also pairs A133 processor with its own wireless chips, either XR829 WiFI 4 and Bluetooth 4.2 chip, or AW859A dual-band 802.11ac WiFi 5 and Bluetooth 5 chip. Allwinner A133 specifications: CPU – Quad-core Arm Cortex-A53 @ 1.6GHz with 32KB L1 I-cache + 32KB L1 D-cache per core, 512KB L2 cache, and CoolFlex power management architecture GPU – Imagination PowerVR GE8300 with support for OpenGL ES3.2, Vulkan 1.1, OpenCL 1.2 Memory I/F – […]

August 13, 2020August 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Snapdragon 626 Powered Rugged Tablet Comes with NFC, RFID and Barcode Readers

Estone Technology has launched another rugged tablet with UA-80 IP-67 waterproof rated, and MIL-STD-810G compliant rugged Android tablet powered by a Qualcomm Snapdragon 626 mobile platform driving an 8″ capacitive touchscreen display. The tablet is equipped with up to 8GB RAM, up to 128GB storage, and comes with HF(NFC) and UHF RFID readers and an optional barcode reader for healthcare, construction, retail, oil and gas, and logistics use cases. Estone UA-80 tablet specifications: SoC – Qualcomm MSM8953 Pro (Snapdragon 626) octa core Cortex-A53 processor @ up to 2.2GHz with Adreno 506 GPU with support for OpenGL ES 3.1 + AEP System Memory – 4GB LPDDR3 (Option: 8GB LPDDR3) Storage – 32GB eMMC flash (Option: 64GB, 128GB) Display – 8″ sunlight-readable IPS LCD with 1200 x 800 resolution, 450 nit brightness, 10-point touch, and chemically hardened cover glass Audio – Built-In microphone and 8 Ohm/1W speaker, 3.5mm 4-pole audio jack with […]

July 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Kano PC 2-in-1 DIY Hybrid Laptop is Powered by an Intel Celeron N4000 Gemini Lake SoC

Kano PC DIY computer kit was launched last year with a low-end Intel Atom x5-Z8350 processor and designed to help kids learn about computers. The company has now launched the second-generation Kano PC with a faster Intel Celeron N4000 dual-core processor, and longer battery life making the 2-in-1 DIY Hybrid laptop/tablet capable of rivaling with entry-level laptops and Chromebooks. Kano PC specifications: SoC – Intel Celeron N4000 dual-core Gemini Lake processor @ 1.10 GHz with Intel UHD graphics; 6W TDP System Memory – 4GB DDR3L RAM Storage – 64GB eMMC flash with 164 MB/s write speed, MicroSD slot Display – 11.6″ touchscreen with 1366 x 768 resolution Audio – 3.5mm headphone jack, 3.5mm speaker level jack, 1x microphone Video 1x HDMI port Connectivity – Dual-band Wi-Fi 4 802.11 b/g/n, Bluetooth 5.0 USB – 2x USB 3.0, 1x USB-C LEDs – 1x power on (red), 1x barrel connector (red), 1x battery […]

June 30, 2020June 30, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

CutiePi Raspberry Pi CM3+ Lite based Tablet Launched on Kickstarter

Raspberry Pi Compute Module 3+ Lite based CutiePi open-source tablet has been in the making for well over a year, and the company has made enough progress to launch a Kickstarter campaign with the Raspberry Pi tablet offered for $169 and up. CutiePi specifications: SoM – Raspberry Pi Compute Module 3+ Lite with Broadcom BCM2837 quad-core Cortex-A53 processor and 1GB RAM Storage – MicroSD card slot Display – 8-inch 5-point multi-touch display with 1280×800 resolution Video Output – Micro HDMI Audio – 2W 8Ohm speaker Camera – 5MP front-facing camera Connectivity – WLAN 802.11 b/g/n WiFi 4 and Bluetooth 4.0 (RTL8723BS) USB – 1x USB type-A port Expansion – 6x GPIO pins Sensor – Gyroscope Misc – Handle that doubles as a stand Battery – 5,000 mAh Li-Po battery Power Supply – 5V via USB Type-C port; STM32 MCU handles power management and battery level monitoring Dimensions – 213 x […]