tablet News - Page 51 of 58 - CNX Software

November 18, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Announces Snapdragon S4 Liquid Mobile Development Platform Tablet

Following their new Snapdragon S4 processors announcement, Qualcomm also unveiled the Snapdragon S4 Liquid MDP Tablet for developers based on MSM8960 with 2GB LPDDR2 system memory, 32 GB eMMC and 1 MB NOR Flash. This reference design features a 10.1-inch 1366 x 768 (16:9) 10-finger capacitive multitouch display, on-die LTE modem, dual 1080p cameras (front:13 MP / rear: 2MP) and another two for 3D, 7 (!) microphones, surround stereo speakers and lots of sensors: dual 3D accelerators, 3-axis gyro, a compass, ambient light and proximity sensor, temperature and pressure sensor and a fingerprint sensor. It also supports haptic feedback thanks to two dual independently-controlled linear vibrator motors. Although Android Honeycomb and ICS can do without, the S4 MDP comes with its fair share of (physical) button: combo volume / zoom rocker, power button, screen rotation lock, home button and reset button. External connectors include a docking station port, micro USB […]

November 18, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Archos Unveils Arnova 9 G2 Android Tablet

Archos has announced another low cost Arnova Android tablet, the Arnova 9 G2, featuring a 1GHz single core ARM Cortex A8 (most probably Rockchip RK2918) and a 9.7 inch capacitive touchscreen IPS display with a resolution of 1024 x 768 pixels (4:3 Aspect Ratio) that supports 5-point multi-touch. The display characteristics are almost exactly the same as the IPAD 2, luckily Apple has not filled a patent for screen size and resolution yet… 🙂 The device also features 8GB flash and a microSD card slot which can take up to 32GB cards. There is no mention of the RAM capacity of this tablet. Arnova 9 G2 includes a front facing camera for video chat, a pair of stereo speakers, a stereo audio jack, a microphone, a standard USB 2.0 port as well as a micro USB port and it comes with 802.11 b/g/n WiFi and is 3G ready thanks to […]

November 17, 2011November 17, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Amazon Kindle Fire Source Code Available

After Android 4.0 source code release, it’s a good week for open source, as Amazon has also opened Kindle Fire source code as it had to comply with Android Open Source Project (AOSP) license has some point. Source code for other Kindle products is also available. The source code for the Kindle Fire is tarred in a file named Kindle_src_6.2_11185402.tar.gz which is quite a large download (809 MB). The file contains 4 directories with the source code for the Linux kernel (2.6.35), a modified version of Android 2.2, the bootloader (u-boot) and x-loader, first-level bootloader for OMAP SoC. I’m not sure many people will work on this version, as Android 4.0 source code for OMAP4 (The processor used in Kindle Fire) is available and has been ported to Galaxy Nexus and TI OMAP4 low cost development board (Pandaboard). So we could see Android 4.0 (ICS) running on Kindle Fire in […]

November 11, 2011November 12, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

11 Recommendations for Optimizing Mobile Apps Power Efficiency

Following an AT&T Labs Research and corresponding paper entitled “Profiling Resource Usage for Mobile Applications: A Cross-layer Approach“, AT&T found that a few simple design approaches could significantly improve mobile application responsiveness and reduce battery drain by lowering your application power consumption. They analyzed PANDORA internet radio and discovered that the streaming music was delivered efficiently, but periodic audience measurements were draining battery life. Here is an excerpt of the PANDORA Case Study: While the music itself was sent simply and efficiently as a single file, the periodic audience measurements—each constituting only 2KBs or so—were being transmitted at regular 62.5-second intervals. The constant cycle of ramping up to full power (2 seconds to ramp up, 1 second to download 2KB) and back to idle (17 seconds for the two tail times, the first down from full-power mode and the second down from half-power mode) was extremely wasteful. Of the total […]

October 26, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Samsung Demoes a WQXGA (2560×1600) 10.1″ LCD Panel

Samsung developed a 10.1-inch LCD panel that supports 2560 x 1600 resolution and exhibited it at FPD International 2011, which takes place on October 26 to 28, 2011, in Yokohama, Japan. This display using IGZO (In-Ga-Zn-O) TFTs technology. It is targeted to tablets and consume the same amount of power as current 10.1″ 1280×800 (WXGA) displays thanks to “Pentile” technology that uses red, green, blue and white color filters (CFs) as two pixels. The brightness and contrast ratio of the panel are respectively 400cd/m2 and 900:1. Its maximum power consumption is 3.4W. The power consumption of the panel excluding its backlight is just 26mW. Source: http://techon.nikkeibp.co.jp/english/NEWS_EN/20111026/199826/ Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

October 19, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Current and Future Intel Atom Processors Promotion Video

Intel upload a new promotion video about the application made possible by Intel Atom processors: home and building management, intelligent displays, retail, IVI, communications devices, digital signage and more. You’ll see applications built around Intel Atome6xx, e6x5c, z6xx as well as future Intel Atom processors using 32nm process (Cedar Trail?) Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

October 6, 2011October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

60 USD Android Tablet: Aakash UbiSlate 7 Tablet

After much delay, the low cost tablet promised by the Indian government is finally released. The Aakash UbiSlate 7 is designed primarily for Indian students and will be sold to them at a discount. The tablet will be manufactured by Datawind in Hyderabad, India. The retail price will be 2,999 Rupees (~61 USD), but it will be sold to the government for 2250 Rupees (~46 USD) and will end up in the hands of students for a sponsored price of 1300 Rupees (~26 USD). Here are Aakash UbiSlate 7 Tablet Specifications: Processor: 366MHz Conexant Processor Memory: 256MB RAM Storage: 2GB Flash memory + 2GB Micro SD card (expandable to 32GB) OS: Android 2.2 with Getjar Marketplace (not the default Android Marketplace) Display: 7″ resistive touchscreen Network: Wifi only. Later models will be GPRS and SIM enabled. USB: 2 x ports Audio out: 3.5mm jack / Audio in: 3.5mm jack Battery: […]

October 5, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

NFC Smart Meter Demo by NXP and Landis-Gyr

NXP and Landis+Gyr are showcasing smart meters equipped with NFC technology at the Metering Europe 2011 event in Amsterdam this week. The companies are demonstrating how utility companies will be able to use NFC smart meters to: Save money by removing the need to include an LCD display in a smart meter. Meter readers will instead use an NFC-enabled phone to take a reading from the meter and then use their handset to collect and view current and historical energy consumption. Use an embedded secure element in the smart meter to increase customer privacy while at the same time providing the necessary level of access to installation and service technicians. Enable authorised maintenance technicians to download metering information to handsets or tablets as well as upload firmware updates to the meter via NFC. Use secure device pairing to deliver home area network (HAN) capabilities. Provide secure and convenient pre-payment of […]