tablet News - Page 12 of 58 - CNX Software

July 10, 2018August 2, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Microsoft Surface Go Tablet Based on Intel Pentium Gold 4415Y Processor to Sell for $399 and Up

Microsoft Surface devices are powerful but usually expensive ($2,000+) tablets and laptops, but the company has now launched an entry-level model called Surface Go, powered by an Intel Kaby Lake Pentium processor with 4 to 8GB RAM, 64 to 256 GB storage, and a 10″ high resolution display, and selling for $399 and up. Microsoft Surface Go specifications: SoC – Intel Pentium Gold 4415Y dual core/four thread Kaby Lake-Y processor @ up to 1.6 GHz (base frequency), with 24EU Intel HD Graphics 615 @ 300 / 850 MHz; 6W TDP System Memory – 4 or 8GB LPDDR3-1866 Storage – 64GB eMMC flash, 128GB or 256GB SSD, micro SD card slot Display – 10″ 1800×1200 PixelSense display; 3:2 aspect ratio; built-in kickstand with full friction hinge that extends to 165 degrees Cameras – 8MP Rear camera, 5MP Front-facing camera with Windows Hello facial recognition Audio – 3.5mm headphone jack Connectivity – […]

July 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Xiaomi Mi Pad 4 8″ Tablet Comes with Snapdragon 660 Processor, 4G LTE Connectivity

Android tablets are not as popular as they used to be, and the choice of tablets has come down as a results. However, Xiaomi still keeps on updating their Mi Pad family every year or two years. After NVIDIA based Mi Pad in 2014, Intel based Mi Pad 2 in 2015, and Mediatek powered Mi Pad 3 last year, the Chinese company has now launched Mi Pad 4 with a Qualcomm 660 octa-core processor and an 8″ Full HD display. Xiaomi Mi Pad 4 specifications: SoC – Qualcomm Snapdragon 660 octa-core Kryo 260 processor @ up to 2.2 GHz (1.8 GHz for the low power cluster), Adreno 512 GPU with support for OpenGL ES 3.2, OpenCL 2.0 full,Vulkan, DX12, and Hexagon 680 DSP with Hexagon Vector eXtensions (HVX) System Memory – 3 or 4GB LPDDR4x Storage – 32 or 64 GB eMMC 5.1 flash, micro SD card slot up to […]

June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Digitize Handwritten Notes with a $10 LCD Writing Pad and CamScanner App

Despite writing about high-tech technology with processors, software, IoT, artificial intelligence news everyday, I’m still very much a pen and paper kind of guy when it comes to taking notes. But this morning, I figured out it’s possible to digitize your notes on the cheap without having to use actual ink and paper, as 8.5″ digital LCD writing pads now cost as little as $10 shipped, and although those are pretty dumb devices with just an erase button and no connectivity nor storage, you can “scan” your notes using CamScanner app for Android and iOS. Specifications for the $10 model: 8.5″ LCD display with 25%-30% reflective ratio Pen Input pressure – 10-20g Power Supply – CR2016 button battery (included) Dimensions – 228 x 147 x 5mm (ABS plastic) Weight – About 110g This will reduce the amount of paper you use and store, and possibly have a positive impact of […]

June 18, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ALLDOCUBE KNote5 Gemini Lake Tablet Runs Windows 10 on a 11.6″ Display

Intel Gemini Lake processors have already been seen in several mini PCs such as Intel June Canyon NUCs, as well as some laptops from Acer, Jumper, and others, but ALLDOBUCE brings us what looks to be the first Gemini Lake tablet with KNote5 model equipped with a Intel Celeron N4100 processor, 4GB RAM, 128 GB storage, and a 11.6″ display. ALLDOCUBE KNote5 specifications: SoC – Intel Celeron N4100 quad core Gemini Lake processor @ 1.10 GHz / 2.40 GHz (Boost) with Intel UHD graphics 600 ; 6W TDP System Memory – 4 GB LPDDR4 Storage – 128 GB internal storage (SSD?), micro SD card slot up to 128 GB Display – 11.6″ FHD (1920×1080) IPS display with 10-point capacitive touchscreen Audio – Dual speaker, microphone, 3.5mm audio jack Connectivity – Dual band 802.11 b/g/n/ac WiFi and Bluetooth 4.0 USB – 1x USB type C port Camera – 2.0MP front-facing camera […]

May 4, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Acme Systems CM3-PANEL Panel PC based on Raspberry Pi Compute Module 3 Sells for 99 Euros and Up

After their first Raspberry Pi Compute Module 3 based board called CM3-Home designed for home automation, Acme Systems has designed a new RPi CM3 carrier board called CM3-PANEL for panel PCs / tablets. They sell four variants of their panel PC built around the board with or without WiFi module and/or 868MHz RF module, and offer customization services for people willing to purchase at least 100 pieces. CM3-PANEL based Panel PC specifications: Socket for Raspberry Pi Compute Module 3 Display – 7″ (800×480 resolution) with 10-point capacitive touch Camera – MIPI connector for Raspberry Pi Camera Up to 24 GPIO lines available for extensions or LCD backlight control Camera led and camera shutdown control SPI bus (5 GPIOs) Hardware PWM lines (2 GPIOs) Serial line PCM line (4 GPIOs) I2C bus Model specific features: CM3-PANEL-W – 802.11 b/g/n WiFi @ 2.4GHz (RaLink RT5370N USB module) CM3-PANEL-U – 1x USB host […]

April 16, 2018June 29, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

$200 VOYO i8 Max 2-in-1 4G Android Tablet is Powered by Mediatek Helio X20 Processor

Mediatek Helio X20 (MT6797) deca-core processor was announced about 3 years ago, and made into various smartphones – such as Vernee Apollo Lite – as well as MediaTek X20 Android development board. However so far, I did not see any proper tablets based on the processor, but VOYO i8 Max tablet with a 10.1″ display and 4G LTE connectivity has just started to sell for $199.99 and up including shipping. [Update: price drops to US$162.99 with GKB89VW coupon. valid until 2018/7/24] Voyo i8 Max specifications: SoC – Mediatek Helio X20 deca-core processor with two Arm Cortex A72 cores @ 2.1 GHz, four Cortex A53 @ 1.95 GHz, four Cortex A53 @ 1.4 GHz, and Arm Mali-T880 GPU @ 800 MHz System Memory – 4GB RAM Storage – 64GB eMMC flash + micro SD slot up to 64/128GB Display – 10.1″ 1920×1200 IPS display with stylus support Audio – 3.5mm audio […]

April 10, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HP Chromebook x2 is a 2-in-1 Tablet Running Chrome OS

We’ve recently seen what should be the first Chrome OS tablet with Acer Chromebook Tab featuring a Rockchip RK3399 / OP1 processor, and a 9.7″ display. The device is now joined by a high-end tablet, or more exactly a 2-in-1 tablet/ laptop with HP Chromebook x2. Specifications: SoC – Intel Core M3-7Y30 dual core/four thread processor @ 1.0 / 2.6 GHz with Intel HD Graphics 615 @ 300 / 615 MHz; 4.5W TDP System Memory – 4GB or 8GB LPDDR3-1600 RAM Storage -32GB eMMC flash, micro SD slot up to 256 GB Display – 12.3″ touchscreen display with 2400 x 1600 resolution; Camera – 13MP rear camera, 5MP front-facing camera/webcam Audio – Stereo speakers, dual microphones, headphone jack Connectivity – 802.11 ac 2×2 MIMO WiFi, Bluetooth 4.2 LE USB – 2x USB 3.0 type C ports User Input – Detachable island-style keyboard and an HP Active Pen for pressure-sensitive input. Battery […]

April 9, 2018April 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

RasPad is a Tablet Kit for Raspberry Pi 3 B+ and Other Development Boards (Crowdfunding)

Many people interesting in coding and working on projects with the Raspberry Pi just likely connect the board to a monitor, USB keyboard and mouse, and to a power adapter, but if you are interested in having some more compact and portable RasPad tablet kit may be for you. The kit is compatible with Raspberry Pi boards, including the latest Raspberry Pi 3 B+, as well as other Arm/x86 Linux development boards including Tinker Board, LattePanda or BeagleBone Black. [Update: The design likely only works with RPi form factor, so if you use other boards with HDMI output, you may have to leave them out of the housing] RasPad key features: Display – 10.1″ IPS touch screen Video – HDMI port Audio – 2W speaker, audio jack Misc – 3 buttons (volume/brightness +, volume/brightness -, power), micro “USB touch” port Battery – Good for about 3 hours Power Supply – […]