stb News - Page 21 of 33 - CNX Software

June 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

JW-11 Android or Linux Media Player Supports Internal 2.5″ Hard Drive

If you’re not simply watching movie streamed from the Internet, one way to store your media files is in a NAS, and another way is to store directly into your media player with an Hard drive. Unless you run a SAMBA or NFS server within your media player, you may lose the ability to access your files from several devices, but by playing directly from the hard drive, you are sure any video will be played smoothly. There are few low cost set-top box that support SATA, and the ones that do, such as Mele A1000 and its successors, simply offer an external SATA connector leaving your hard drive without protection from dust. I’ve just noticed there’s a low cost solution with an internal HDD enclosure thanks to an Android set-top box powered by Amlogic AML8726-M3 called either JW-11 or Slav, and maybe some other names I’ve missed. Here are […]

June 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Kaiboer F4 Rockchip RK3188 Powered Set-top Box with Two External Wi-Fi Antennas

We’ve got a another full-sized Android set-top box featuring Rockchip RK3188 quad core processor, this time with not one, but two external Wi-Fi antennas, as well as the usual 2GB RAM, and Android 4.2 operating system. Here are the specifications of the device: SoC – Rockchip RK3188 up to 1. 8 GHz with Mali-400 MP4 GPU System Memory – 2GB DDR3 Storage – 8 to 16GB Flash + 1x SD card Video Output – HDMI, and AV Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, and Wi-Fi 802.11 b/g/n with 2 external Wi-Fi antennae USB – Micro USB OTG + 4x (or is it 2x?) USB host ports Power & reset buttons The device should be available within 20 days in China, but the product looks very similar to another Kaiboer STB based on RK3066 and selling for 519 RMB ($84), so it’s unlikely it will […]

June 20, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mele M9 Android Set-top Box Powered by AllWinner A31

After Mele A1000G Quad, Mele has just launched another model called M9, still based on AllWinner A31 quad core processor, with an external Wi-Fi antenna, but no SATA support. Mele M9 specifications: SoC – AllWinner A31 quad core Cortex A7 @ 1.5GHz + PowerVR SGX544MP2 GPU System Memory – 2GB DDR3 RAM Storage 16GB NAND Flash SD card slot Video Output – HDMI 1.4 Audio I/O – HDMI + S/PDIF optical out + Audio jack output Video Playback – Up to 2160p @ 60 Mbps USB – 3x USB 2.0 host ports, 1x mini USB 2.0 OTG port Connectivity Ethernet – 10/100Mbps Wi-Fi – 802.11 b/g/n Power Supply – 5V/2A The device runs Android 4.1 with a customized “Windows 8” user interface, and comes with a 5V/2A power adapter, an IR remote control (show below), an HDMI cable, a user’s manual, and a warranty card. The remote above as a […]

June 17, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

iPazzPort SY-20-19VC Android STB is also a Remote Control Charging Dock

iPazzPort SY-20-19VC, aka iPazzPort Pearl, is an Android 4.1.1 set-top box powered by Rockchip RK3066 that comes bundled with with a dual sided RF remote with a QWERTY keyboard, touch pad, and voice support. That’s pretty common these days. The design however, is somewhat original, as once you’re done watching videos or playing games, you can put back the remote into an opening in the set-top box to store it and recharge it, and it may prevent you from losing the remote under the pillows, and the remote will be fully charged most of the time. Here are the specifications of this media player: SoC – Rockchip RK3066 @ 1.6GHz + Mali-400 MP4 GPU System Memory – 1GB DDR3 Storage – 4GB + micro SD card slot (up to 32GB, or is it 16GB?) Connectivity 802.11b/g/n Wi-Fi 10/100M Ethernet 3G via external USB 3G dongle Video Output – HDMI 1.4 […]

June 14, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rockchip RK3188 Based Giayee TVB103 Android TV STB Features VGA and HDMI Video Output

Although there are now many Rockchip RK3188 mini PCs, full sized quad core Android STB are not so common, especially with VGA output, and Giayee TVB103 is the only quad core media player providing both HDMI and VGA output that I know of. Here are Giayee TVB103 specifications: SoC – Rockchip RK3188 ARM Cortex A9 28nm Quad core 1.8GHz CPU + Quad-core GPU Mali400 System Memory – 1 to 2GB DDR3 RAM Storage – 8/16/32GB NAND Flash + micro SD card slot (up to 64GB) Connectivity: Built-in WiFi 802.11 a/b/g/n module supporting dual band (2.4GHz & 5GHz) 10/100 Base-T Ethernet Bluetooth 2.1 + EDR Video Output – HDMI, VGA, and AV (Note the latter can’t be seen on any pictures) Audio – L and R Output (RCA), S/PDIF, earphone jack & MIC input USB – 2x USB Host ports, and 1x Mini USB OTG port Dimensions – 155 x 90 […]

June 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Galapad Galaz is a Pyramidal Set-top Box

Up to now, the set-top box with the most innovative or weird design, depending on who you ask, was certainly Tronsmart Prometheus with its spaceship-like casing. Another Chinese company called Galapad may have gone a bit further with a device shaped like a pyramid with blue lights at the top and bottom. We don’t know much details about this media player, except it comes with HDMI output, RJ45 and mini USB connectors, an audio jack, and a microSD card. The company’s other designs (all tablets) are based on Nvidia Tegra SoCs, so it’s likely this one, if it’s ever sold, will also feature Nvidia Tegra 3 or 4 processor. Via AndroidPC.es and PCPop Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

June 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Geniatech Releases ATV510B Source Code, Teases Dual and Quad Core ATV130 and ATV180 mini PCs

XBMCHUB (not affiliated with XBMC) reports that Geniatech has released the Android and Linux source code for ATV510B, one of Geniatech set-top boxes based on AML8726-M3 Cortex A9 processor. ATV510B is the design used by devices such as Pivos XIOS DS, Jynxbox Android HD, Sumvision Cyclone Nano M3, and MyGica ATV510B Enjoy TV Nano 3, among others. Pivos has made U-boot, Linux and XBMC source code available in github for a little while now, but this new release is a pretty large file (2.39 GB) called xbmcandroid_com-ics-base-M3-20121212.tar.bz2 that includes Android 4.0 source including the kernel and the bootloader. This source code should work with “stvmc” hardware, as found in build.prop’s ro.product.name or ro.product.device keys. I haven’t looked into details, but here’s the content of the root directory of the archive: On a separate note, Geniatech also showed the picture below on their Facebook page, with 2 new Android TV Sticks: […]

June 6, 2013June 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Pandora TV Box is an All-in-One Android Media Player, Game Console, DVB Receiver, Video Chat System, etc…

This morning I received an email from DealExtreme with a link to a teaser video about an upcoming Android device to be available on June 10, that comes with a game controller (PS3 type) to play games. After some research, I finally found this “Android-on-TV” device which is based on Rockchip RK3066 with 1GB RAM, 8GB Flash, lots of ports (USB, HDMI, Ethernet), a webcam, and more. Beside the game controller, it also comes with a remote control, so the device can be used for a whole lot of applications including gaming, video chat, media player, web browsing, and more. It’s something you can already do with existing devices, but it may require some efforts, and this one seems to come all included. Here are the specs of the “beast”: SoC – Rockchip RK3066 dual-core processor @ 1.6GHz + MALI 400 MP4 GPU System Memory – 1GB DDR3 Storage – […]