som News - Page 61 of 79 - CNX Software

December 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Kunbus RevolutionPi RevPi Core Raspberry Pi based Industrial Computer Sells with Digital I/O Modules and Fieldbus Gateways

Kunbus, a German company specialized in industrial network solution, has decided to design an industrial system based on Raspberry Pi Computer module supporting variable power supply, a wide temperature range, DIN rail mounting, etc, as well as corresponding digital I/O modules and fieldbus gateways. RevolutionPI RevPi Core specifications: SoC – Broadcom BCM2835 ARM11 processor @ 700 MHz System Memory – 512 MB Storage – 4GB flash Video Output – Micro HDMI port Connectivity – 10/100M Ethernet port USB – 2x USB 2.0 host ports, 1x micro USB port Misc – RTC, 3x status LEDs (2 programmable) Power Supply – 10.7 V to 28.8 V; polarity protection; 4 kV / 8 kV ESD protection & EMI passed (according to EN61131-2 and IEC 61000-6-2), surge and burst tests passed Power Consumption – Max: 10 Watts including 2 x 450 mA USB load; typ.: 4 watts. Dimensions – 96 x 22.5 x 110.5 […]

December 15, 2016December 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Quectel SC20 Smart LTE Modules with WiFi, BLE and GPS Run Android 5.1

Google may just have released Android Things operating systems for IoT applications, but its big brother – Android – has already gotten into some other IoT systems such as Quectel SC20 module powered by a Qualcomm processor and supporting LTE, WiFi, Bluetooth LE, and GNSS functions. Quectel SC20 comes in different flavors to cater for various markets, but all module share most of the same specifications: SoC – Unnamed Qualcomm processor System Memory – TBD Storage – 8GB flash Cellular Connectivity – FDD LTE, TDD LTE, TD-SCDMA, EVDO/DCMA, WCDMA, and GSM; antenna: MIMO 2×2, supports Rx-diversity Other Wireless Connectivity WiFi – 2.4GHz 802.11b/g/n (SC20-CE/-W); Dual band 802.11a/b/g/n/ac (SC20-E/-A/-AU/-J) Bluetooth 2.1+EDR/3.0/4.1 LE GNSS – GPS, GLONASS, and BeiDou Interfaces LCD – 4x lanes MIPI-DSI, 1.5Gbps each, HD (720p) @ 60fps Camera – MIPI-CSI, up to 1.5Gbps per lane, supports two cameras 2-lane MIPI_CSI for rear camera, up to 8MP 1-lane MIPI_CSI […]

December 8, 2016December 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

STMicro SensorTile is a Tiny STM32 Module with Bluetooth 4.1 LE and Four Sensor Chips

STMicroelectronics SensorTile is a 13.5 x 13.5mm sensor board based on STM32L4 ARM Cortex-M4 microcontroller, a MEMS accelerometer, gyroscope, magnetometer, pressure sensor, a MEMS microphone, as well as a 2.4Ghz radio chip for Bluetooth 4.1 Low Energy connectivity for wearables, smart home, and IoT projects. SensorTile hardware specifications: MCU – STMicro STM32L476 ARM Cortex-M4 microcontroller@ up to 80 MHz with 128 KB RAM, 1MB flash Connectivity – Bluetooth 4.1 Smart/LE via BlueNRG-MS network processor with integrated 2.4GHz radio compliant with Sensors LSM6DSM 3D accelerometer + 3D gyroscope LSM303AGR 3D Magnetometer + 3D accelerometer LPS22HB pressure sensor/barometer MP34DT04 digital MEMS microphone I/Os – 2x 9 half holes with access to UART, SPI, SAI (Serial Audio Interface), I2C, DFSDM, USB, OTG, ADC, and GPIOs signals Debugging – SWD interface (multiplexed with GPIOs) Power Supply Range – 2V to 5.5 V Dimensions – 13.5 x 13.5 mm Software development can be done through […]

November 29, 2016November 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Theobroma Announces Rockchip RK3368 and RK3399 Qseven System-on-Modules

Theobroma Systems, an embedded system company based in Austria, has designed several Allwinner systems-on-module compliant with μQseven & Qseven standards in the past. The company has now started to work with Rockchip and reached “an advanced design stage” for the development of μQseven and QSeven systems-on-module powered by RK3368 and RK3399 processors. RK3368-uQ7 module specifications: SoC – Rockchip RK3368 octa-Core ARM Cortex-A53 processor up to 1.2GHz with Imagination Technologies PowerVR G6110 GPU System Memory – up to 4GB DDR3-1600 SDRAM on-module (512MB, 1GB, 2GB (default) and 4GB configuration available) Storage – Up to 128GB eMMC flash on-module (8GB default), 16 Mbit to 128 Mbit SPI NOR flash on-module Video Capabilities – H.264 decoding up to 2160p30, H.265 decoding up to 2160p60, video encoding up to 1080p30 Connectivity – GbE PHY on-module CAN – On-module communication offload controller for CAN 230-pin MXM edge connector with: 10/100/1000 Mbps Ethernet USB – 1x […]

November 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

8Devices Rambutan Qualcomm Atheros QCA9557 / QCA9550 GbE & WiFi Modules and Development Kit Run OpenWrt

8Devices, a Lithuanian company specialized in the development and manufacturing of electronic equipment, is known for their Carambola and Carambola2 WiFi modules powered by Ralink and Qualcomm Atheros WiSoCs. The company has now introduced a new dual band WiFi module called Rambutan that comes in commercial and industrial temperature range through respectively Qualcomm Atheros QCA9557 & QCA9550 SoCs. Rambutan and Rambutan-I modules specifications: SoC Rambutan – Qualcomm Atheros QCA9557 MIPS processor @ 720 MHz Rambutan-I – Qualcomm Atheros QCA9550 MIPS processor @ 720 MHz System Memory – 128 MB DDR2 Storage – 128 MB Flash Connectivity WiFi – 802.11 a/b/g/n, 2.4 or 5 GHz, 2×2 MIMO, 300 Mbps data rate, 21 dB per chain output power; 2x u.FL connectors Ethernet – Atheros AR8032 10/100M Ethernet PHY 68x half holes with 2 x USB 2.0 host port 2 x serial port 1x 100 Base-T Ethernet port; 1000 Base-T Ethernet port (SGMII […]

November 8, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR Tech Latest SoM and Development Board Feature Xilinx Zynq-7015 ARM + FPGA SoC with 4 High Speed Transceivers

MYIR Tech launched the low cost Z-Turn board powered by Xilinx Zynq-7010/7020 ARM+FPGA SoC last year, and the company has now introduced a new system-on-module powered by Xilinx Zynq-7015 SoC as well as a corresponding development kit. MYC-C7Z015 CPU Module specifications: SoC – Xilinx XC7Z015-1CLG485C (Zynq-7015) dual core ARM Cortex-A9 processor @ 667 MHz (up to 866MHz) with Artix-7 class FPGA subsystem with 74K logic cells, 46,200 LUTs, 160 DSP slices, 4x high-speed SerDes transceivers up to 6.25 Gbps, 4x four PCIe Gen2 hardened, integrated IP blocks System Memory – 1GB DDR3 SDRAM Storage – 4GB eMMC flash, 32MB QSPI Flash (16MB optional) Connectivity – 1x Ethernet PHY, 1x USB PHY I/Os and peripherals via 2x 140-pin board-to-board connectors: 1x Gigabit Ethernet 1x USB OTG 2.0 Up to 2x serial ports, up to 2x I2C, up to 2x CAN BUS, 1x SPI 1x independent differential ADC, 16-channel ADC 1x SDIO […]

November 4, 2016November 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Inforce Computing Introduces 6301 SoM and Devkit Powered by Snapdragon 410E SoC with Long Term Availability

Qualcomm launched Snapdragon 410E and 600E processors for the embedded market at the end of September, meaning the processors were easy to source by any company, not matter how small they are, and the company would now offer long term availability often required for embedded systems. Inforce Computing is now leveraging the new Snapdragon 410E processor with their Inforce 6301 micro SoM, and corresponding development kit. Inforce 6301 micro SoM specifications: SoC – Qualcomm Snapdragon 410E (APQ8016 SoC) quad core ARM Cortex A53 processor @ 1.2GHz, Adreno 306 GPU, and Hexagon DSP @ 700MHz Memory – 1GB LPDDR3 @ 533MHz (Option: 2GB) Storage – 8GB eMMC v4.5 flash (Option up to 64GB) NAND, 1x micro SD card interface with support up to HS200 Connectivity – Bluetooth 4.1 LE, Wi-Fi dual stream 802.11 b/g/n @ 2.4GHz (WC3620), on-board GPS/GNSS/BeiDou/Galileo (WGR7640) Video – H.264/263 playback and capture @1080p; H.265 playback @720p; Interfaces […]

October 27, 2016March 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Samsung Introduces $5 ARTIK 0 and $50 ARTIK 7 Smart IoT Module Families

Samsung unveiled ARTIK 1, 3 and 5 boards for the Internet of Things in 2015, and started to sell them, together with development with WiFi, BLE and Zigbee connectivity earlier this year. The Korean company has now announced two new family with ARTIK 0 modules powered by an ARM Cortex-M MCU and destined to be used in HVAC, lighting, industrial sensors, personal health monitoring and more, as well as ARTIK 7 family powered by an Octa-core Cortex A53 processor, and targeting IoT gateways. ARTIK 0 Family ARTIK 0 family is now comprised for ARTIK 020 with Bluetooth, and ARTIK 030 for applications requiring Thread and/or Zigbee. Beside the different radios, both modules share the same key features: MCU – ARM Cortex-M4 up to 40 MHz with Floating Point Unit, 256KB flash, 32 KB SRAM, advanced hardware cryptographic engine with support for AES-128/-256, ECC, SHA-1, SHA-256, and a Random Number Generator […]