smartphone News - Page 43 of 75 - CNX Software

February 17, 2016February 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

NexDock is a 14″ Lapdock Alternative for mini PCs, Development Boards, Smartphones and Tablets (Crowdfunding)

Motorola once launched the Lapdock, a device that looks like a laptop with a 11.6″ screen and a keyboard, but without processor or memory since it was instead designed to connect to the company’s Atrix 4G smartphone. Motorola eventually pulled the plug on this concept, and maybe it was just ahead of its time, as a startup has now developed NexDock, a device similar to Lapdock with a 14″ display, built-in battery and Bluetooth keyboard. NexDock technical specifications: Display – 14.1″ TN screen; 1366×768 resolution; 16:9 display ratio Bluetooth 4.0 keyboard and touchpad Video input – mini HDMI port Audio Output – 3.5mm headphone port Storage – micro SD card slot USB – 2x USB ports Battery – 3.8V / 10000mAh Li-ion battery Power – 5V/2.5A via 3.5mm power barrel Dimensions – 351 mm x 233 mm x 20 mm Weight – 1490 grams NexDock is operating system agnostic and would […]

February 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Qualcomm Announces Snapdragon Wear 2100 for Smartwatches, 3 New Cortex A53 Mobile SoCs

Qualcomm has unveiled four new Snapdragon processors with three quad and octa core Cortex A53 processors for smartphones with 4G LTE connectivity, and a new wearables SoC with lower power and, area compared to Snapdragon 400 series processor often used in smartwatches. Snapdragon Wear 2100 SoC is the first processor part of Qualcomm Snapdragon Wear, of new platform targeting wearable devices, with the company listing the following highlights: Quad core Cortex A7 processor @ up to 800 MHz or 1.2 GHz Adreno 304 GPU 30% smaller than Snapdragon 400 25% percent lower power than Snapdragon 400 Integrated, ultra-low power sensor hub Available in both tethered (Bluetooth and Wi-Fi) and connected (4G/LTE and 3G via X5 LTE modem) pin-to-pin compatible versions The SoC supports Android Wear, and Android, and should be found in smart watches, smart bands, smart eyewear and smart headsets. Snapdragon Wear 2100 and other Snapdragon Wear products are […]

February 5, 2016February 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ProView S3 Affordable 3-Axis Smartphone Stabilizer Helps Shooting Better Videos (Crowdfunding)

Smartphone stabilizers (aka gimbals) for smartphones allow you take much better videos while on the move, as they smooth the shaking that occurs when you walk, run, or bike. Stabilizers are currently available, such as KumbaCam or other white brand stabilizers, are sold for $250 to $400, but Navin, a Taiwanese company, has designed a cheap video stabilizer for smartphones with ProView S3 that starts at $125 + shipping via Indiegogo. ProView S3 3-axis stabilizer can handle larger size smartphones, features orientation sensors, precision motors, and stabilization algorithms to provide smooth video recording. Some of ProView S3 specifications and features include: Adjustable mount from 67mm to 78 mm width Wind resistant thanks to algorithms and mechanical design Connectivity – Bluetooth 4.0 for wireless firmware updates Dual IMU sensors with tilt, roll, and pan motors. Underslung shot- You can take videos upside down too… 4 operational modes – Full Lock (no […]

February 3, 2016February 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Gladius GT-500 Rugged Android Smartphone Features a Built-in Barcode Reader, LTE Connectivity

ARBOR technology has introduced Gladius GT-500 “5” Rugged Android Handheld Device” running Android 5.1 on MediaTek MT6735 quad core processor, with LTE connectivity, IP67 rated, and featuring a build-in 1D/2D barcode reader with physical trigger buttons. Gladius GT-500 smartphone specifications: SoC – Mediatek MT6735 quad core Cortex A53 processor @ 1.3 GHz with ARM Mali-T720 GPU System Memory – 2GB LPDDR2 Storage – 16GB eMMC flash + 1x micro SD slot up to 32GB Display – 5″ TFTP LCD; 1280×720 resolution; 5-point glove-friendly projector capacitive touch screen; 400 cd/m2 brightness Cellular Connectivity 2G GSM/GPRS/EDGE (Band 850 / 900 / 1800 / 1900) 3G WCDMA (Band 1,2,5,8) 3G CDMA2000 (BC0/BC1) 4G FDD+TDD (Band 1,3,5,7,8,20,38,39,40,41) 4G DRX (Band 1,3,5,7,8,20,38,39,40,41) SIM Sockets – 1 x micro-SIM (3FF) socket supporting 2G/3G/LTE; 1 x micro-SIM (3FF) socket supporting 2G only Other Connectivity – Wi-Fi 802.11a/b/g/n, Bluetooth 4.1 (BLE, HS compliant), NFC, and GPS/GNSS/Beidou Camera – […]

January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mediatek Introduces MT6738, MT6750 & MT6750T SoCs for Entry Level LTE Smartphones

Mediatek will soon launch three new mobile SoCs based on ARM Cortex A53 cores and Mali-T860 GPU, as well as support for LTE Cat.6 modem, with MT6738, MT6750 & MT6750T processors targeting entry-level Android smartphones. All three processors are manufactured with 28nm process, support up to 4GB LPDDR3 RAM, decode H.264/H.265 up to 1080p30, encode H.264 up to 1080p, and support LTE FDD/TDD, DC-HDPA+, TS-SCDMA, EDGE, and CDMA2000. The main differences are in the number of cores for the CPU and GPU, and maximum display & camera resolution: MT6738 features four Cortex A53 cores @ 1.5 GHz with a Mali-T860MP1 GPU, and supports 1280×720 displays, and up to 13MP cameras. MT6750 octa-core processor includes two clusters of four Cortex A53 cores @ 1.5 and 1.0 GHz combined with a Mali-T860MP2, and supports 1280×720 displays, and up to 16MP cameras MT6750T has the same specs as MT6750, except it supports Full […]

January 13, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

FOSDEM 2016 Schedule – Open Source Hardware and Software Event in Europe

FOSDEM (Free and Open Source Software Developers’ European Meeting) is a 2-day event that usually takes place on the first week-end of February in Brussels, but this year it will be on January 30-31. The event brings thousands of developers, hackers, and other person interested in open source technology who present their projects and share ideas. FOSDEM 2016 schedule is now available, and There will be 557 speakers, 612 events, and 50 tracks this year including 7 main tracks: Distros, Enterprise, Hardware, Communications, Miscellaneous, Office, Systems Administration, and Virtualization. So I’ve had a look at some of the talks, especially out of “Embedded, Mobile and Automotive” and “IoT” devrooms, and prepared my own virtual schedule although I won’t be able to attend. Saturday 10:30 – 10:55 – MIPS, the other side of the embedded by Alexjan Carraturo For many years MIPS processors have been involved in the embedded market, particularly […]

January 13, 2016October 2, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel RealSense Devkit and Lenovo Smartphone to Feature Project Tango 3D Mapping Technology

Project Tango is a project launched in 2014 by Google ATAP that aims at creating 3D map of your environment using 3D motion tracking with depth sensing for tracking your movements in 3D, precise and quick measurements, augmented reality and more. The first Project Tango development kit was a tablet based on Nvidia TegraK1, but Google recently announced that Lenovo planned to launch the first consumer smartphone with the technology. Beside the announcement that there are going to make a phone, the company did not provide many other details so far, but it should feature a screen smaller than 6.5″ and cost less than $500. The main reason Google posted about this before CES 2016 was probably to reach out to developers who can submit the app idea to be features on the first Tango phone by February 16, 2015 with the following materials: Project schedule including milestones for development […]

January 11, 2016January 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Multi-function Power Banks Can Jump Start Your Car Beside Charging Your Phone

Many people carry a USB power bank with them to make sure their smartphone does not run out of battery, but based on my experience failing to start your car because of a depleted or dead battery will bring ever more anxiety. Interestingly/funnily enough, while this happened to my neighbors last week-end, today I was informed that TM08 multi-function power bank was designed to both charge your phone or laptop, and help start your car. TM08 specifications: Input – 12V/1A Output – 5V-2A via USB and 12V jump starter for car with 200A starting current, and 400A peak current Battery Capacity – 12000mah Charging Time – 3 to 4 hours Life cycle – Over 1,000 cycles Dimensions – 130x70x25 mm Weight – 311 grams Operating Temperature – -20℃-85℃ The kit comes with adapters to charge your phone or other devices, as well as cables to connect to your car’s battery. […]