set-top box News - Page 6 of 30 - CNX Software

January 8, 2016August 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 138 Comments

Specs, Unboxing and Teardown of KI Plus Android TV Box with DVB-T2/S2 Combo Tuner

If you’ve been following this blog, you must now that I reviewed K1 Plus Android TV box based on Amlogic S905 processor a little while ago. Videostrong has sent me yet another K1 Plus device, except this time it is an Android receiver with a tuner card supporting both satellite (DVB-S/S2) and terrestrial (DVB-T/T2) reception. Today, I’ll list the specs, take a few pictures of the device, before checking out the tuner board. K1 Plus Android DTV receiver specifications The specifications are exactly the same as the TV box, except for the added tuner: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack […]

December 26, 2015March 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD, a company specializing in “high-performance digital media players”, has just unveiled Dune HD Solo 4K media player based on Sigma Designs SMP8758 dual core Cortex A9 processor, supporting 10-bit HEVC video decoding up to 2160p @ 30 fps, HD audio pass-though, and including a SATA tray. Dune HD Solo 4K specifications: SoC – Sigma Designs SMP8758 dual core Cortex A9 processor @ 1.2 GHz with an ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB Storage – 4GB flash for firmware, internal HDD rack with hot swap function for a 2.5″ SATA drive, SD card reader (TBC) Video Output – HDMI 1.4b up to 1080p60 and 4K @ 30 Hz (including 23.976, 25, 29.97, 50, 59.94Hz refresh rates), and composite video Audio Output – HDMI, analog stereo audio, coaxial S/PDIF (shared via AV port). 24-bit /192 KHz audio support Video codecs – MPEG2, MPEG4, XVID, […]

November 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Videostrong K1 Plus Amlogic S905 Android TV Box Unboxing and Teardown

Many Amlogic S905 TV boxes have been announced, and thanks to Videostrong, I’ve received my first Amlogic S905 device for review with their K1 Plus media player (aka KI Plus). Today, I’ll start by listing the specifications, before taking a few pictures of the device and its board. with the full review following up in a few days. Videostrong K1 Plus Specifications K1 Plus is one of the entry level models with 1GB RAM and 8GB storage by default: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack Audio – HDMI, AV (stereo), optical S/PDIF Video Codecs – 10-bit H.265 up to 4K60, […]

September 29, 2015September 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

ARNU Box Mach Q Kodi 15 Linux TV Box Specs, Unboxing and Teardown

After having a look at ARNU Box Mach 10 Pure Linux earlier today, I’ll move on to its little brother ARNU Box Mach Q featuring an Amlogic S805 processor with support for H.265 video playback at Full HD. I’ll start by listing the specs, then I’ll take a few pictures, and finally check the board. ARNU Box Mach Q (Pure Linux) specifications Again, the hardware specifications are pretty standard: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with quad core Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB storage + SD card slot Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi and Bluetooth Video Output – HDMI 1.4 up to 1080p60, AV output Audio Output – HDMI, AV, optical S/PDIF USB – 2x USB 2.0 ports Misc – IR sensor, Status and Net LEDs Power Supply – 5V/2A Dimensions – 107.5 x 107.5 x […]

September 28, 2015January 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Infomir MAG Linux & Android Set-top-boxes Feature STMicro or Broadcom Processors, Support Open Source IPTV Solution

Infomir is a group of companies that specializes on the development, design, production and maintenance of equipment and client support for IPTV, OTT and VoD services, with offices in Ukraine and the US. They’ve been selling their Linux based MAG set-top-boxes based on STMicro STB SoC for a little while, and their upcoming model include either STMicro or Broadcom processor, and have support for “Stalker” open source IPTV middleware that allow their customers to setup their own IPTV services for thousands of clients. Their upcoming MAG products fit into three categories: Basic IPTV set-top boxes (no tuner) MAG257 – STMicro STiH301 single core Cortex A9 processor @ 1.5GHz with 512 MB RAM, 512MB storage, USB 2.0 & 3.0 ports, Ethernet, HDMI 1.4. The box runs Linux, and supports HEVC decoding up to 1080p. Hybrid set-top boxes MAG277 – STMicro STiH301 single core Cortex A9 processor @ 1.6GHz with 1 GB […]

August 31, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Tronfy MXIV Telos TV Box Review with Android 5.1

Tronfy MXIV Telos is a TV box powered by Amlogic S812 processor running Android 5.1 Lollipop and costing just above $90 (with coupon), so it will be interesting to find out how it performs compared to Mygica ATV1900AC also based on Amlogic S812 SoC, and Android Lollipop firmware (version 5.0.2), which I reviewed recently, and sells for $169. I’ve already checked the hardware in Tronfy MX4 Telos Unboxing and Teardown, so today I’ll check how the device actually performs. First Boot, Settings and First Impressions I started by connecting peripherals: A USB hard drive to one of the USB port, and a USB hub to the other USB port with a webcam, and two RF dongles for an air mouse and a wireless gamepad, as well as HDMI and Ethernet cables, and the power supply. I then had to press the power button on the unit to start it up, […]

August 13, 2015August 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mygica ATV586 Quad Core Android DVB-T2 Receiver Unboxing and Teardown

Today, I received both Mygica ATV1900AC and ATV586 from Geniatech. I’ve already taken apart ATV1900AC, so it’s now the turn for Mygica’s latest Android DVB-T2 receiver powered by Amlogic S805 to get photographed and torn down. If you don’t like in a region where DVB-T2 is supported, Mygica also sells a version with an ATSC tuner. Mygica ATV586 Unboxing That’s the retail package for the receiver that shows the tuner type (DVB-T2), and that the box is based on a quad core processor supporting HEVC/H.265 video codec and running Kodi in Android 4.4. There are quite a lotf of accessories in the package including the usual HDMI cable, 5V/2A power supply, and IR remote with two AAA batteries, but there’s also a TV antenna set with an indoor antenna and mounts. I’ll try the indoor antenna, but it’s unlikely to work in my location, so I’ll probably connect the box […]

August 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 59 Comments

List of Rockchip RK3368 Android mini PCs

Last year, Rockchip RK3288 was always going to be popular, since it offered a massive performance upgrade compared to its predecessor (Rockchip RK3188) with Cortex A17 cores replacing Cortex A9 cores, and a Mali-T764 GPU replacing an aging Mali-400MP4 GPU, plus the addition of 4K video output and decoding, as well as H.265 video codec support. So many manufacturers got involved that I decided to write a list of RK3288 TV boxes and sticks. Rockchip RK3368, the company’s new “flagship” processor for 2015, is a bit less exciting despite providing eight 64-bit ARM cores, since Cortex A53 cores are significantly less powerful than the Cortex A17 cores found in RK3288, and the performance of the PowerVR G6110 GPU used in the processor is a bit of an unknown for now. RK3368 might still rank pretty well in benchmark since it comes with eight cores instead of four cores, but I’m […]